---
product_id: 14317667
title: "Raspberry Pi Case (Black) (Not Compatible with Pi 3 Model B Plus)"
brand: "oneninedesign"
price: "0.88 DT"
currency: TND
in_stock: true
reviews_count: 6
url: https://www.desertcart.tn/products/14317667-raspberry-pi-case-black-not-compatible-with-pi-3-model
store_origin: TN
region: Tunisia
---

# Compact Dimensions 2 USB 2.0 Ports Heat Sink Openings Raspberry Pi Case (Black) (Not Compatible with Pi 3 Model B Plus)

**Brand:** oneninedesign
**Price:** 0.88 DT
**Availability:** ✅ In Stock

## Summary

> 🔧 Unleash Your Raspberry Pi Potential!

## Quick Answers

- **What is this?** Raspberry Pi Case (Black) (Not Compatible with Pi 3 Model B Plus) by oneninedesign
- **How much does it cost?** 0.88 DT with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.tn](https://www.desertcart.tn/products/14317667-raspberry-pi-case-black-not-compatible-with-pi-3-model)

## Best For

- oneninedesign enthusiasts

## Why This Product

- Trusted oneninedesign brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Smart Cooling:** Heat sink openings ensure optimal performance.
- • **Mountable Design:** Surface mountable for versatile placement.
- • **Effortless Access:** Removable lid for seamless connection access.
- • **Sleek & Functional:** Elevate your tech aesthetic with a high-gloss finish.
- • **Versatile Compatibility:** Designed for Raspberry Pi 2, B+, and Pi 3.

## Overview

The OneNineDesign Raspberry Pi Case in sleek black is engineered for Raspberry Pi 2, B+, and Pi 3, featuring dual LED ports, heat sink openings for efficient cooling, and a removable lid for easy access to all connections. Weighing just 0.32 ounces and measuring 4.3 x 2.9 x 1.3 inches, this case combines style and functionality, making it a must-have for tech enthusiasts.

## Description

As of April 11, 2016, this case has been fully updated for the Raspberry Pi 3.In order to accommodate all variants of the current format, the case features two sets of LED openings on either side of the Display Connector.In addition, the openings above the CPU and LAN chips are sized to accommodate heat sinks for 3 generations of the Raspberry Pi, including versions 3, 2 and B+.An Elegant, high-end case for your Raspberry Pi. Fully assembled, this case is as solid as can be. Featuring a removable lid for easy access to all connections with allowance for cable routing with lid in place for a clean appearance. Two camera mounting options (on the base or hidden beneath the lid) make this the perfect case for use with a camera.This case is not flimsy or brittle, unlike other cases, this case features a thick-walled design strong enough to be taken apart and put re-assembled many times without failure.Not suitable for the Model A/A+ boards or the original format Model B.

## Features

- Fully updated for Raspberry Pi 3
- Two sets of LED ports to accomodate Pi 3 as well as Pi 2 & B+
- Heat sink openings for both CPU and LAN chip
- Removable lid, access all connections
- High-gloss finish, surface mountable

## Technical Specifications

| Specification | Value |
|---------------|-------|
| Number of USB 2.0 Ports | 2 |
| Brand | OneNineDesign |
| Item model number | 6479148 |
| Item Weight | 0.32 ounces |
| Product Dimensions | 4.3 x 2.9 x 1.3 inches |
| Item Dimensions  LxWxH | 4.3 x 2.9 x 1.3 inches |
| Color | Black |
| Manufacturer | OneNineDesign |
| ASIN | B00UW2G1BS |
| Is Discontinued By Manufacturer | No |
| Date First Available | March 11, 2015 |

## Product Details

- **Brand:** OneNineDesign
- **Motherboard Compatability:** Mini ITX
- **Case Type:** Raspberry Pi
- **Color:** Black
- **Material:** Plastic
- **Power Supply Mounting Type:** Surface Mount
- **Cooling Method:** Heatsink
- **Item Weight:** 9.07 g
- **Number of USB 2 Ports:** 2
- **Compatible Devices:** Raspberry Pi 3, Raspberry Pi 2, Raspberry Pi B+

## Images

![Raspberry Pi Case (Black) (Not Compatible with Pi 3 Model B Plus) - Image 1](https://m.media-amazon.com/images/I/41RGsK0c7EL.jpg)
![Raspberry Pi Case (Black) (Not Compatible with Pi 3 Model B Plus) - Image 2](https://m.media-amazon.com/images/I/41FLTDwxDPL.jpg)
![Raspberry Pi Case (Black) (Not Compatible with Pi 3 Model B Plus) - Image 3](https://m.media-amazon.com/images/I/41nPBkj+6PL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ 5.0 out of 5 stars







  
  
    Easily modified for 3B+ in five minutes.
  

*by M***W on Reviewed in the United States on August 24, 2018*

I was having trouble with this, trying to pry the bottom off of the middle section.  Don't do it that way.  Instead, push the bottom away from the top on all four corners and it will come right off.  It's even easier if the Pi is installed.I intend to mount this to a panel and expect that I'll be able to pull the middle piece from the bottom to disassemble, change the SD card, etc., leaving the bottom screwed in place.  I'll update this review if it doesn't work.To use this for a 3B+ takes two modifications.1: You need to file away a bit of the plastic at the end of the GPIO header to make room for the POE pins, which otherwise prevent the board from sitting in the middle piece.  I used a small, square needle file.2: Also on the middle piece, on the bottom (board side), there's a stand-off between the HDMI and power ports that interferes with a somewhat large SMT component.  Take a sharp knife and remove half of the stand-off, until the board fits properly (there's a smaller SMT component on the 3B which also interferes with this stand-off, so I had to trim it down even for the 3B).  Total modification time, well under 5 minutes.There's room for an ample heat-sink on the CPU, for both the 3B and 3B+.  Mine is 14mm tall.  The network chip is in a different place on the 3B+ so you can't put a heat-sink on that without more filing, but the network chip shouldn't need one.

### ⭐⭐⭐⭐⭐ 5.0 out of 5 stars







  
  
    Best value of any Pi case
  

*by R***R on Reviewed in the United States on April 14, 2017*

I salvaged a Model B+ v1.2 from a coworker's dead project and needed a case quick.  This one was reasonably priced and shipped fast.It's a tool-less design, relying on friction/snap fasteners to sandwich the Pi between the bottom and middle pieces.  I was able to pry this apart with my fingers, although it took a little while and would have been much faster had I retrieved a bladed screwdriver.It took me a few tries to realize that I had to slide the Pi board underneath a couple of integral retainers on the bottom piece before the enclosure would snap together.  There are a couple of embossed arrows to identify this but they're not immediately apparent.The top piece is held on by friction alone so that you can remove it easily in order to access the GPIO pins and other components.Once together, the enclosure is solid and provides good protection.  It appears to provide plenty of ventilation for thermal convection but I haven't powered this Pi up yet.  I sort of wish the top piece was clear so I could see the LEDs without removing it, but I'm very happy with this case.

### ⭐⭐⭐⭐ 4.0 out of 5 stars







  
  
    ★ 4 Star Product Description (fixable) ★ 4.5 Star Case (foam feet) ★ 5 Star Customer Service
  

*by J***T on Reviewed in the United States on February 17, 2018*

This is a five-star product, and the company and their service are amazing!  The reason for only four stars is a misleading product description.  When I read "Heat sink openings for both CPU and LAN chip" I just understood that it comes with the "Heat Sinks" because that's how the bullet starts.  IMHO this line should read "Openings for both CPU and LAN chip Heat sinks (heatsinks not included)".  When I got the product I was disappointed that there are in fact no heat sinks and checked the description again realizing that I simply interpreted it incorrectly.  Make this description more clear and I will upgrade this review to five stars!When I received my case, the left-hand "bottom" corner was damaged (probably in shipping).  There is a very small (less than 1mm square) plastic indent which causes the top to be spaced slightly, and this little plastic piece was squashed flat.  I simply wrote the seller explaining what I received and they promptly sent me a new case - I actually got the new case in the mail sooner than I noticed the email letting me know this would happen.  I was very happy to discover the new case in the mail.  Thank you!  Their customer service was very nice, responsive and they told me there is no need to return the broken case.  Very professional and responsible.  The product is good, just as described.Conclusion: 5 stars for Cana Kit customer service.  4.5 stars for the actual case.  I don't like the feet on this as much as other cases I have.  The "feet" are foam stickers, not the rubber kind which provides better traction.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.tn/products/14317667-raspberry-pi-case-black-not-compatible-with-pi-3-model](https://www.desertcart.tn/products/14317667-raspberry-pi-case-black-not-compatible-with-pi-3-model)

---

*Product available on Desertcart Tunisia*
*Store origin: TN*
*Last updated: 2026-03-25*