---
product_id: 181543454
title: "Sovol Filament Dryer 2025, SH01 Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm Filament & PLA PETG TPU ABS"
brand: "sovol"
price: "12.25 DT"
currency: TND
in_stock: false
reviews_count: 7
url: https://www.desertcart.tn/products/181543454-sovol-filament-dryer-2025-sh01-dehydrator-3d-printer-spool-holder
store_origin: TN
region: Tunisia
---

# Upgraded fan for even heating Real-time humidity & temp display Precise temp control 40-50°C Sovol Filament Dryer 2025, SH01 Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm Filament & PLA PETG TPU ABS

**Brand:** sovol
**Price:** 12.25 DT
**Availability:** ❌ Out of Stock

## Summary

> 🔥 Keep your filament fresh, your prints flawless!

## Quick Answers

- **What is this?** Sovol Filament Dryer 2025, SH01 Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm Filament & PLA PETG TPU ABS by sovol
- **How much does it cost?** 12.25 DT with free shipping
- **Is it available?** Currently out of stock
- **Where can I buy it?** [www.desertcart.tn](https://www.desertcart.tn/products/181543454-sovol-filament-dryer-2025-sh01-dehydrator-3d-printer-spool-holder)

## Best For

- sovol enthusiasts

## Why This Product

- Trusted sovol brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Power-Off Protection:** Silicone & PTFE seals lock in dryness even when unplugged—filaments stay fresh longer.
- • **Spacious & Versatile:** Fits up to 2 rolls (70mm width) or 1 large roll (150mm width) for all your filament needs.
- • **Smart Climate Control:** Monitor and set drying temperature and time with an intuitive real-time display.
- • **Efficient Airflow Design:** Advanced fan ensures uniform heat distribution for faster, more consistent drying.
- • **Keep Your Prints Flawless:** Eliminates filament moisture to prevent brittle, failed prints and boost layer adhesion.

## Overview

The Sovol Filament Dryer 2025 SH01 is a high-capacity dry box designed to remove moisture from 1.75mm and 2.85mm filaments including PLA, PETG, TPU, and ABS. Featuring precise temperature control (40-50°C), real-time humidity and temperature monitoring, and an upgraded airflow fan, it ensures even drying and improved print quality. Its silicone and PTFE seals maintain filament dryness even when powered off, making it an essential tool for professional-grade 3D printing.

## Description

/

## Features

- 【Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament
- 【Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16℃, the temperature in the dryer box would not come up to 50℃. But do not worry, this would not decrease drying effect
- 【Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality
- 【Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation
- 【Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to let us know. Our technical support team will provide service as soon as we can
- 【You Must Know...】 Place the filament into the filament outlet. Please note that the direction is placed counterclockwise so that the pulley at the bottom can feed better.If the screen displays two errors, E0 and E1, please open the drying box and check all the cable sockets on the motherboard to see if they are damaged or loose. If there is any problem, please feel free to let us know. We will send replacement for you

## Product Details

- **Brand:** Sovol
- **Compatible Devices:** Printer
- **RAM Memory Technology:** DDR3
- **Compatible Processors:** AMD 2nd Gerenration Ryzen
- **Memory Clock Speed:** 2.4 GHz
- **Platform:** Windows 10
- **Model Name:** SV-SH01-1
- **Memory Storage Capacity:** 8 GB
- **Main Power Connector Type:** 24-Pin
- **Graphics Card Interface:** Integrated

## Images

![Sovol Filament Dryer 2025, SH01 Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm Filament & PLA PETG TPU ABS - Image 1](https://m.media-amazon.com/images/I/71Vsn-vKEbL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ Great board (with a little elbow grease)
*by P***N on April 6, 2020*

I bought this board to replace a defective 2.0 board that had the faulty capacitor which led to temp fluctuations.First and foremost... you cannot use this board out of the box in an original Creality CR-10S. The firmware on board is for a SOVOL printer and will not function properly. I ended downloading the TH3D unified firmware kit and compiling my own hex (I wanted mesh bed levelling and needed to adjust the thermal runaway timings). Fortunately the TH3D download comes with everything you need. I was able to compile and flash a new .hex in about 10 minutes.Post flashing the new board the install was a breeze (please make sure you label the cables before you uninstall the old board. It is a tight fit so it may be hard for folks with large hands so I recommend using some needle nose forceps or pliers to help with some of the small connections.With the new board my old CR-10S is back in business and IS SO QUIET. The integrated silencing smoothers make the cr-10s so very quiet. Aside from the fans there is barely any noise at all.I am very pleased with the product and would recommend it for anyone looking to replace a prior board version or just wanting to upgrade to the silent board from an existing 2.1 or 2.2 board.

### ⭐⭐⭐⭐⭐ Easy drop-in replacement for a quieter experience
*by C***. on February 16, 2022*

It really is amazing how quiet the printer becomes with this motherboard. I replaced my internal fan and now all you hear are the belts on fast movements. Easy swap-out for for my SV01 with the standard LCD and without BL-Touch. When I installed BLTouch I had to reflash the board but it was easy to do through OctoPrint. Couple of quick things to note;* The voltage pots on my Z-axis controller was set high and overheating it. Check your voltages if you notice this, just had to tune it down a little. Youtube is a great place to figure out how.* Just like the last board, this board will power up through USB even with the switch powered off. Make sure you use a power blocking USB cable or tape off the + lead on the usb-A portion of the wire.* Just like the previous board, this board has the capability to use dual extruder (has connections for extruder, cooler and temp sensor 2. It's an 8-bit board (as expected).* To remove the hot-glue off your existing board, pour some ISO rubbing alcohol (I use 91%) and let it sit for a few min. It won't short out the board, it'll dry up pretty quickly and the glue will just pull off. Of course make sure power is unplugged before doing so.

### ⭐⭐⭐⭐⭐ Works on Ender 5 Plus!
*by R***S on March 29, 2020*

Yes this works for the Ender 5 plus! Also yes it has a pre installed boot loader. That being the case you don't need an Arduino to flash the creality firmware to it. This one does cost more but it's available much faster since creality is out of stock. There's a couple good YouTubes on doing the 2.2 quiet board and firmware upgrades. The short version : 1. Install the board 2. Install creality slicer on your computer. Ender 5 plus isn't listed just select ender 5 it doesn't matter just for the fw upgrade. 3. Power on printer (it'll just show creality and do nothing else for now) and connect to computer via USB 4. Locate the com port your printer is on 5. Use machine settings in creality slicer to select the com port and baud rate (115200) 6. Search online for the latest firmware it's linked from the YouTube video or on Facebook. CREALITY WEBSITE DOES NOT HAVE LATEST FIRMWARE WTF! You want version 1.70.1bl hex file this is the latest with the bl touch fixes. Select install custom firmware and select your downloaded hex file. The blue light on your newly installed board should blink quickly. When it's done you'll get a prompt saying "installed firmware 1.70.1bl" or whatever your file name was. 7. Disconnect and reset it should now boot up normally. It will however be in Chinese so navigate to the language option and switch to english and your good to go. Your printer will now be significantly more quiet! I also installed X and Y dampers to eliminate the remaining vibrational noises. You shouldn't have to do any of this bs to a $550 printer but here we are??

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.tn/products/181543454-sovol-filament-dryer-2025-sh01-dehydrator-3d-printer-spool-holder](https://www.desertcart.tn/products/181543454-sovol-filament-dryer-2025-sh01-dehydrator-3d-printer-spool-holder)

---

*Product available on Desertcart Tunisia*
*Store origin: TN*
*Last updated: 2026-05-30*