--- product_id: 182941437 title: "7-in-1 RAB Holder + 830 Tie-Points Breadboard+Electronics Fun Kit | Power Supply Module | Precision Potentiometer | Jumper Wires for Prototyping Circuit/Arduino/Raspberry Pi" brand: "makeronics" price: "228.54 DT" currency: TND in_stock: true reviews_count: 8 url: https://www.desertcart.tn/products/182941437-7-in-1-rab-holder-830-tie-points-breadboard-electronics store_origin: TN region: Tunisia --- # 7-in-1 RAB Holder + 830 Tie-Points Breadboard+Electronics Fun Kit | Power Supply Module | Precision Potentiometer | Jumper Wires for Prototyping Circuit/Arduino/Raspberry Pi **Brand:** makeronics **Price:** 228.54 DT **Availability:** ✅ In Stock ## Quick Answers - **What is this?** 7-in-1 RAB Holder + 830 Tie-Points Breadboard+Electronics Fun Kit | Power Supply Module | Precision Potentiometer | Jumper Wires for Prototyping Circuit/Arduino/Raspberry Pi by makeronics - **How much does it cost?** 228.54 DT with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.tn](https://www.desertcart.tn/products/182941437-7-in-1-rab-holder-830-tie-points-breadboard-electronics) ## Best For - makeronics enthusiasts ## Why This Product - Trusted makeronics brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description Color:Blue RAB Kit Component listing: 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs RAB holder 1pcs 830 tie-points Breadboard 1pcs 65 Jumper Wire 140pcs Solderless Jumper Wire 20pcs Female-to-male Dupont Wire 2pcs Pin header (40pin) 1pcs Precision Potentiometer 2pcs Photoresistor 1pcs Thermistor 5pcs Diode Rectifier (1N4007) 5pcs NPN Transistor (PN2222) 1pcs IC 4N35 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Passive Buzzer 10pcs Button (small) 10pcs 22pf Ceramic Capacitor 10pcs 104 Ceramic Capacitor 5pcs Electrolytic Capacitor (10UF 50V) 5pcs Electrolytic Capacitor (100UF 50V) 10pcs White LED 10pcs Yellow LED 10pcs Blue LED 10pcs Green LED 10pcs Red LED 1pcs RGB LED 10pcs Resistor (10R) 10pcs Resistor (100R) 30pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) ## Features - ✔️RAB holder with 830 Solderless Breadboard plus Electronics fun kit,Compatible with Arduino(Mega 2560,Uno) and Raspberry Pi 4B/3B+/3B/2B/1B/Zero - ✔️A Breadboard and Power Supply Module -Include a good range of LEDs, resistors, buttons, capacitors, a few transistors and diodes. - ✔️140 pcs U-shape Solide Copper Jumper Wires plus 65 PCS Copper Jumpers Meet your project expetation。 - ✔️Better improvement on product quality and durablity - ✔️Perfect for Arduino and Raspberry Pi Shield Prototyping and Testing. Powered by Makeronics Technology ## Images ![7-in-1 RAB Holder + 830 Tie-Points Breadboard+Electronics Fun Kit | Power Supply Module | Precision Potentiometer | Jumper Wires for Prototyping Circuit/Arduino/Raspberry Pi - Image 1](https://m.media-amazon.com/images/I/81H+tuqH73L.jpg) ![7-in-1 RAB Holder + 830 Tie-Points Breadboard+Electronics Fun Kit | Power Supply Module | Precision Potentiometer | Jumper Wires for Prototyping Circuit/Arduino/Raspberry Pi - Image 2](https://m.media-amazon.com/images/I/71o7P0zln2L.jpg) ![7-in-1 RAB Holder + 830 Tie-Points Breadboard+Electronics Fun Kit | Power Supply Module | Precision Potentiometer | Jumper Wires for Prototyping Circuit/Arduino/Raspberry Pi - Image 3](https://m.media-amazon.com/images/I/710W2ffioIL.jpg) ![7-in-1 RAB Holder + 830 Tie-Points Breadboard+Electronics Fun Kit | Power Supply Module | Precision Potentiometer | Jumper Wires for Prototyping Circuit/Arduino/Raspberry Pi - Image 4](https://m.media-amazon.com/images/I/61UIklG7TYL.jpg) ![7-in-1 RAB Holder + 830 Tie-Points Breadboard+Electronics Fun Kit | Power Supply Module | Precision Potentiometer | Jumper Wires for Prototyping Circuit/Arduino/Raspberry Pi - Image 5](https://m.media-amazon.com/images/I/61UQYAkDNAL.jpg) ## Customer Reviews ### ⭐⭐⭐⭐ Good for preproduction design, Holds uP and breadboards stable *by C***S on Reviewed in the United States on May 1, 2020* This board is good for design purposes, holding both the uP and breadboard array steady. Width is sufficient for large breadboard panel with both power rails maintained, To add another panel requires removing three power rails for both units to fit into the breadboard section, making the use of an onboard power supply difficult as they usually are attached to the power rails. An undesirable trade off in my mind, if you have a large real estate project. I would prefer an opening for two large breadboards (800+ point) to fit, without having to remove the power rails. The jury is out on the supplied smaller (400 point) breadboards stacked side to side to be used with this board. I am sure that there is no advantage to orientating the breadboards vertically vs the norm of horizontal orientation. Despite, what I would consider to be minor personal biases which can be worked with, the product is well designed, accepts both Arduino and Pi boards in separate bays, allowing the design to be developed on both uP boards without having to reconfigure the palate for the individual processor boards. It comes supplied with mounting hardware and drivers for the mounting hardware. Physically, seems to be a strong, relatively inflexible board, which is a plus and can be easily attached to a table or carrier plate It would be nice to have a parts bin to temporally hold parts not in use while building the design or in the testing process. Whether or not the panel is anti-static conductive, I haven't tested for that, but would suspect it isn't and certainly doesn't have provisions for grounding. ### ⭐⭐⭐ Board needs some redesign *by D***L on Reviewed in the United States on August 2, 2020* This is a nice product, and is useable, but it does have a couple of really annoying design flaws. These design flaws do make using this baseplate feel somewhat awkward, and the cable management is more difficult.1. When both a Raspberry Pi and a 2560 board are installed, the SD card slot on the the RPi is functionally blocked by a header, on the 2560 board. The small standoffs, that are provided with the baseplate, do not elevate the RPi sufficiently, to clear this header.2. When both a Raspberry Pi and another board are installed, their USB inputs are on opposite sides of the baseplate, requiring an awkward USB cable connection.3. The screw holes, for the breadboard retainer clips, are in the wrong place. While each breadboard has an adhesive foam back, these will permanently glue the breadboards in place. If you want to allow the breadboards to be removable, the clips would be used, but with the screw holes in their present position, the clips will cover some of the breadboard holes, when used.Both problems 1 & 2 could be resolved by shifting the 2560 screw-in area to below the breadboard area, but flip it, so that the 2560 board's USB connections are presented along the same edge, as the RPi USB connections. This would result in a more T-shaped appearance. Problem 3 could be resolved by shifting the clips to opposite sides of the breadboards, where they would only press down on the power rail color stripes, and would not cover any holes.If redesigned in this manner, as a T-shaped baseplate, a majority of the cables would be along a single edge, ### ⭐⭐⭐⭐ Good quality kit for bread boarding with Arduino and Raspberry Pi *by R***R on Reviewed in the United States on June 25, 2020* This is a nice kit to hold your project neatly together. Works great with Arduino Uno and Mega. Also with raspberry Pi 4You put your breadboard below and makes it easy to wire up your projects. Rubber feet on the bottom keeps board from sliding on desk which is nice.This product would be perfect for people who move their projects around a lot.The only thing that could make this better would be more room for breadboards (you can never have enough breadboard room.)Definitely worth a buy!!! ## Frequently Bought Together - Makeronics 7-in-1 RAB Holder + 830 Tie-Points Breadboard+Electronics Fun Kit | Power Supply Module | Precision Potentiometer | Jumper Wires for Prototyping Circuit/Arduino/Raspberry Pi - Makeronics 840 Pieces Jumper Wire Kit with 14 Lengths for Breadboard Prototyping Solder Circuits | Electronics Experiment | Arduino or Raspberry Pi or Jetson Nano | Free Storage Box --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.tn/products/182941437-7-in-1-rab-holder-830-tie-points-breadboard-electronics](https://www.desertcart.tn/products/182941437-7-in-1-rab-holder-830-tie-points-breadboard-electronics) --- *Product available on Desertcart Tunisia* *Store origin: TN* *Last updated: 2026-06-05*