---
product_id: 33275545
title: "DOT Approved 7'' Black LED Headlights + 4 '' LED Fog Lights Compatible with Jeep Wrangler 97-2017 JK TJ LJ"
brand: "lx-light"
price: "995.70 DT"
currency: TND
in_stock: true
reviews_count: 13
category: "Lx Light"
url: https://www.desertcart.tn/products/33275545-dot-approved-7-black-led-headlights-4-led-fog-lights
store_origin: TN
region: Tunisia
---

# 4500 LM High Beam brightness IP67 Waterproof rating Plug & Play installation DOT Approved 7'' Black LED Headlights + 4 '' LED Fog Lights Compatible with Jeep Wrangler 97-2017 JK TJ LJ

**Brand:** lx-light
**Price:** 995.70 DT
**Availability:** ✅ In Stock

## Summary

> 🚙 Light up your Jeep, own the night, and never blend in.

## Quick Answers

- **What is this?** DOT Approved 7'' Black LED Headlights + 4 '' LED Fog Lights Compatible with Jeep Wrangler 97-2017 JK TJ LJ by lx-light
- **How much does it cost?** 995.70 DT with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.tn](https://www.desertcart.tn/products/33275545-dot-approved-7-black-led-headlights-4-led-fog-lights)

## Best For

- lx-light enthusiasts

## Why This Product

- Trusted lx-light brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Tailored for Jeep Legends:** Perfect fit for Jeep Wrangler models 1997-2017, including JK, TJ, LJ variants—some may need minor bracket tweaks.
- • **Built to Brave the Elements:** IP67 waterproof aluminum housing ensures your lights keep shining through rain, mud, and dust.
- • **DOT & E-Mark Certified Legality:** Drive confidently knowing your lights meet strict Federal Motor Safety Standards—legal and road-ready.
- • **Effortless Upgrade, Instant Style:** Plug & play design means you’re back on the road faster, with no decoder or complex wiring needed.
- • **Blinding Brightness, Zero Compromise:** Illuminate every trail and street with 4500 lumens of pure LED power—see and be seen like never before.

## Overview

The LX-LIGHT DOT Approved 7'' Black LED Headlights paired with 4'' LED Fog Lights deliver ultra-bright, legal-compliant lighting designed specifically for Jeep Wrangler models from 1997 to 2017. Featuring 4500 lumens on high beam and IP67 waterproof durability, these plug-and-play LEDs upgrade your vehicle’s visibility and style with minimal installation effort. Built with premium US LED chips and rugged aluminum housing, they promise over 50,000 hours of reliable performance, making them the ultimate lighting solution for Jeep enthusiasts who demand both function and flair.

## Description

Buy LX-LIGHT DOT Approved 7'' Black LED Headlights + 4 '' LED Fog Lights Compatible with Jeep Wrangler 97-2017 JK TJ LJ: Headlight Assemblies - desertcart.com ✓ FREE DELIVERY possible on eligible purchases

Review: Great Lights. Awesome - Great upgrade! They look and so far function awesome! The below install guide from user RAAB in this very was extremely helpful. See below. I would add to make sure you youtube the turn signal installation. This was helpful to me. https://www.youtube.com/watch?v=3vLKkoJxXb4. It addresses the turn signal load resistor that you will need to set up. I got the headlights, fogs, turn signals and side markers. Took us 3 hours partly because we had to remove a custom bumper as well. They are really nice and bright! I have already received compliments. I would recommend buying these as my other options including JW were $700 and up just for headlights. Headlights ======== 1. REMOVAL: Park in a garage or near a wall and turn on the lights. Mark the center of the beam (horizontally and vertically) for both headlights and both fog lights. This is used as a reference for aiming the new lights. Turn off the lights and remove the grille (you tube videos show you how, takes 3 minutes) and remove each headlight bezel by unscrewing the 4 small torx bolts that hold them in. The headlights come right out after that. 2. INSTALLATION: There is some slight modification required to install the new headlights. Each headlight has three extrusions (tabs) that fit into slots in the headlight housing on the Jeep. One slot is at the bottom (6 o'clock) and the others are roughly at 10 o'clock and 2 o'clock. This is to make sure the headlight is oriented properly and ensures a snug fit. The driver side headlight fits snugly with no issues. However, the 10 o'clock tab on the passenger side is a bit off from the factory headlight housing--about 1/16th of an inch. This means the headlight will not sit flush in the housing without modification. The 6 o'clock and 2 o'clock align ok, so I used a dremel to cut off the lip of the 10 o'clock housing slot on the Jeep (widened the slot). The headlight was able to fit flush after that and without and play (it was a tight fit). Easy plug and play after that, just reinstall the bezels after you have adjusted the headlight aim accordingly. 3. OPTIONAL: When the headlight bezels are removed, it is a good time to paint them black if you choose. I used a flat black trim paint, 3 coats was sufficient. However, I used a dremel to scuff up the surface of the bezels since paint does not like to stick to chrome. The micro scratches on the surface of the chrome helped with adhesion, and the black bezels blend in nicely with the lights. Worth the extra time and money in my opinion. Fog Lights ======== 1. REMOVAL: With the grille removed (step 1 above), it is necessary to remove the bumper trim between the front bumper and radiator. It is a flat 4" wide by 4' long rubberized plastic strip that is mounted to the frame with two plastic body screws. They are easily accessible, just unscrew and pull them out. This trim piece is required to be removed so the fog lights can be installed, they are too big to fit between the frame from underneath. You also need to remove the plastic splash shield under the Jeep. For mine it required pulling out 6 plastic trim retainers and it dropped right down. No tools needed other than a flat tip screwdriver to pry the retainers out. Earlier JK versions I believe required a philips screw driver. There are you tube videos on this as well. Each fog light sits in a plastic bracket that is screwed to the inside of the bumper using 4 philips head screws. I had to use a shorty philips screwdriver on the driver's side fog light because of some interference issues. When unscrewed, the entire fog light assembly comes out. 2. INSTALLATION: The fog lights that came in the set were installed in cheap plastic housings and the lights would jiggle a little bit in them. I prefer not to have my fog lights bouncing up and down when driving. Additionally, the adjustment screws are mounted on the wrong sides of the housing, so they cannot be adjusted after installed. Because of this, I popped the lights out of the supplied housing and installed them into the stock housings. If you decide to do this, here is what I did: 2.a. Unscrew the philips head adjustment screw from the old fog lights completely, be careful not to lose the spring or the screw. Both of these will be reused for the new fog light. 2.b. Pop out the light from the old housing. There are two tabs on the sides of the light that secure it in the housing, you just gentle pry away the housing away from these tabs to release the light. 2.c. Install the new lights into the old housing. The fit should be as snug as the factory fit. Make sure the fog lights have full range of motion up and down. I had to cut off a little 1/8" tab on the back side of the old housings that were interfering with the full range of motion. This was done with a box cutter. 2.d. Install the old adjustment screws and springs. The adjustment screws will thread into the new lights with some effort since the threads are more coarse, but the diameter is the same. You just end up rethreading the housing. This enables you to adjust the lights using the factory holes in the frame and is a much more robust installation! 3. Reinstall the fog lights, plug them in, reinstall the splash guard, trim, and grille, and adjust the fog lights as needed. As you can see, there is a little bit of modification required if you want a quality install, but the lights are great quality.
Review: Great Lights. Awesome Customer Service. - ***Great Customer Service*** First off, I have to give credit to LX-LIGHT for their exceptional customer service and product support. I bought these lights in late 2017 but never had a chance to install them until now. These were shipped to my house in the states while I was on military orders to Japan. When I came back home in late 2019 and was finally able to install them, one of the fog lights had a rattle. I took a chance and asked LX-LIGHT if I could obtain a replacement just for that one fog. They were extremely nice and ensured me that they will take care of everything. I sent them a picture my install and a week later, I got a new set of lights...no fuss! They really went above and beyond and exceeded my expectation in every way. They really do stand by their products! ***Awesome Lights*** This is really a great looking set of lights. Installation was easy and straight forward. You definitely need to take the grill off. Detach the turn signal harnesses or bulbs. If you have stock bumpers, remove the plastic panel covering the frame behind it for easy access to the fog lights. Fitment was generally pretty spot-on. My passenger side headlight was a little tight fitting when trying to seat it in, but trust me, it fits. The fog lights also included harnesses to adapt its connectors to your existing wiring. No modification needed! Afterward, put everything back on and adjust the beam. You will have to adjust the aim of your beam down a bit for these lights. They are super bright and fills the road very well. Check out the pictures I uploaded. The one at night is low beam on the freeway. Overall, I am satisfied with this purchase. Thank you!

## Features

- New upgrade & Easy installation- plug and play for both headlight and fog lights(some may need a little modification).Headlight come with built-in EMC function for anti-flicker,no need extra decoder!
- DOT Approved (DOT SAE HL VOL 12V LY DOT7-001) + E-Mark Approved (HR-PL-E9-01.1125)- 100% guarantees that your lights are legal on the road, meeting section 108 requirements of the Federal Motor Safety Standards. Your DOT-compliance is clearly etched on the lens of the light.
- Super Bright- Made with original US high intensive led Chips,1000% brighter than other similar headlights and fog lights kit on the market. Operating Lumens Output: 4500 LM (High Beam),3200 LM (Low Beam) for each headlight; 1800LM for each Fog Light. Black durable aluminum housing,waterproof(IP67),6000K,more than 50000 hour lifespan.
- Fitment- Compatible with Jeep 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Hard Rock,Jeep Wrangler JK JKU TJ LJ Freedom Edition, Rubicon(some need extra mounting bracket), Sahara, Unlimited Hard Rock Edition, Willys Wheeler, Altitude, Dragon Edition, X Sport Utility...2-Door, 4-Door.(some Hard Rock,Rubicon X,Anivesary,10th Anniversary Editions,may need extra mounting bracket)
- Package included- 2pcs 7 inch LED headlights+ 2pcs H4 to H13 adapter for headlight+ 2pcs 4 Inch led fog lights+2pcs 9005/9006-5202(H16) wiring adapter for fog lights+1 Installation guide

## Technical Specifications

| Specification | Value |
|---------------|-------|
| ASIN | B01KNXSIYS |
| Additional Features | Waterproof |
| Auto Part Position | Left |
| Automotive Fit Type | Vehicle Specific Fit |
| Best Sellers Rank | #60,115 in Automotive ( See Top 100 in Automotive ) #265 in Automotive Headlight Assemblies |
| Brand | LX-LIGHT |
| Brand Name | LX-LIGHT |
| Color | Black |
| Compatible with Vehicle Type | Compatible with 1997-2017 Jeep Wrangler JK JKU TJ LJ Freedom Edition Hard Rock Rubicon (some need extra mounting bracket), Sahara, Unlimited Hard Rock Edition, Willys Wheeler, Altitude, Dragon Edition, X Sport Utility...2-Door, 4-Door.(some Hard Rock,Rubicon X,Anivesary,10th Anniversary Editions,may need extra mounting bracket) |
| Customer Reviews | 4.4 out of 5 stars 3,219 Reviews |
| Is Assembly Required | Yes |
| Item Dimensions | 7 x 7 x 3 inches |
| Item Weight | 4 Pounds |
| Lens Color | Clear |
| Lens Material | Plastic |
| Light Source | LED |
| Light Source Type | LED |
| Manufacturer | LX-LIGHT |
| Manufacturer Part Number | LX-RHLFL746 |
| Manufacturer Warranty Description | one year warranty |
| Model Number | 8542082398 |
| Model Year | 1997 |
| Specific Uses For Product | Head Lights |
| Vehicle Service Type | Compatible with 1997-2017 Jeep Wrangler JK JKU TJ LJ Freedom Edition Hard Rock Rubicon (some need extra mounting bracket), Sahara, Unlimited Hard Rock Edition, Willys Wheeler, Altitude, Dragon Edition, X Sport Utility...2-Door, 4-Door.(some Hard Rock,Rubicon X,Anivesary,10th Anniversary Editions,may need extra mounting bracket) Vehicle Service Type Compatible with 1997-2017 Jeep Wrangler JK JKU TJ LJ Freedom Edition Hard Rock Rubicon (some need extra mounting bracket), Sahara, Unlimited Hard Rock Edition, Willys Wheeler, Altitude, Dragon Edition, X Sport Utility...2-Door, 4-Door.(some Hard Rock,Rubicon X,Anivesary,10th Anniversary Editions,may need extra mounting bracket) See more |
| Voltage | 12 Volts (DC) |
| Wattage | 90 watts |
| Year | 1997 |

## Product Details

- **Brand:** LX-LIGHT
- **Color:** Black
- **Specific Uses For Product:** Head Lights
- **Light Source Type:** LED
- **Vehicle Service Type:** Compatible with 1997-2017 Jeep Wrangler JK JKU TJ LJ Freedom Edition Hard Rock Rubicon (some need extra mounting bracket), Sahara, Unlimited Hard Rock Edition, Willys Wheeler, Altitude, Dragon Edition, X Sport Utility...2-Door, 4-Door.(some Hard Rock,Rubicon X,Anivesary,10th Anniversary Editions,may need extra mounting bracket)
- **Year:** 1997
- **Special Feature:** Waterproof
- **Voltage:** 12 Volts (DC)
- **Wattage:** 90 watts
- **Auto Part Position:** Left

## Images

![DOT Approved 7'' Black LED Headlights + 4 '' LED Fog Lights Compatible with Jeep Wrangler 97-2017 JK TJ LJ - Image 1](https://m.media-amazon.com/images/I/71GRpv-4PVL.jpg)

## Questions & Answers

**Q: I had one led headlamp go out is there a way to purchase just a single headlamp?**
A: Yes please check this asin: B01KJPPSY8 (same like harley headlight), if your lights still on the warranty period(one year), just contact us with your order id, we will arrange new replacement to you for free, thanks!

**Q: Will these fit a 2017 jk 2dr sport s ?**
A: Yes will fit your car!

**Q: I have a 2018 wangler jk unlimited 4 door, will these led lights fit my jeep??**
A: Did you get the fog lights installed?

**Q: The passenger light quit working in normal use. the high beams work, but when switched on for normal use they do no illuminat at all? Any help?**
A: please check the connection, the adapter may loosing or broken, or just change the passenger headlight to the driver side to check if it work or not, if still same result, please contact us and we will arrange new replacement to you. Thanks

## Customer Reviews

### ⭐⭐⭐⭐⭐ Great Lights. Awesome
*by J***K on July 24, 2017*

Great upgrade! They look and so far function awesome! The below install guide from user RAAB in this very was extremely helpful. See below. I would add to make sure you youtube the turn signal installation. This was helpful to me. https://www.youtube.com/watch?v=3vLKkoJxXb4. It addresses the turn signal load resistor that you will need to set up. I got the headlights, fogs, turn signals and side markers. Took us 3 hours partly because we had to remove a custom bumper as well. They are really nice and bright! I have already received compliments. I would recommend buying these as my other options including JW were $700 and up just for headlights. Headlights ======== 1. REMOVAL: Park in a garage or near a wall and turn on the lights. Mark the center of the beam (horizontally and vertically) for both headlights and both fog lights. This is used as a reference for aiming the new lights. Turn off the lights and remove the grille (you tube videos show you how, takes 3 minutes) and remove each headlight bezel by unscrewing the 4 small torx bolts that hold them in. The headlights come right out after that. 2. INSTALLATION: There is some slight modification required to install the new headlights. Each headlight has three extrusions (tabs) that fit into slots in the headlight housing on the Jeep. One slot is at the bottom (6 o'clock) and the others are roughly at 10 o'clock and 2 o'clock. This is to make sure the headlight is oriented properly and ensures a snug fit. The driver side headlight fits snugly with no issues. However, the 10 o'clock tab on the passenger side is a bit off from the factory headlight housing--about 1/16th of an inch. This means the headlight will not sit flush in the housing without modification. The 6 o'clock and 2 o'clock align ok, so I used a dremel to cut off the lip of the 10 o'clock housing slot on the Jeep (widened the slot). The headlight was able to fit flush after that and without and play (it was a tight fit). Easy plug and play after that, just reinstall the bezels after you have adjusted the headlight aim accordingly. 3. OPTIONAL: When the headlight bezels are removed, it is a good time to paint them black if you choose. I used a flat black trim paint, 3 coats was sufficient. However, I used a dremel to scuff up the surface of the bezels since paint does not like to stick to chrome. The micro scratches on the surface of the chrome helped with adhesion, and the black bezels blend in nicely with the lights. Worth the extra time and money in my opinion. Fog Lights ======== 1. REMOVAL: With the grille removed (step 1 above), it is necessary to remove the bumper trim between the front bumper and radiator. It is a flat 4" wide by 4' long rubberized plastic strip that is mounted to the frame with two plastic body screws. They are easily accessible, just unscrew and pull them out. This trim piece is required to be removed so the fog lights can be installed, they are too big to fit between the frame from underneath. You also need to remove the plastic splash shield under the Jeep. For mine it required pulling out 6 plastic trim retainers and it dropped right down. No tools needed other than a flat tip screwdriver to pry the retainers out. Earlier JK versions I believe required a philips screw driver. There are you tube videos on this as well. Each fog light sits in a plastic bracket that is screwed to the inside of the bumper using 4 philips head screws. I had to use a shorty philips screwdriver on the driver's side fog light because of some interference issues. When unscrewed, the entire fog light assembly comes out. 2. INSTALLATION: The fog lights that came in the set were installed in cheap plastic housings and the lights would jiggle a little bit in them. I prefer not to have my fog lights bouncing up and down when driving. Additionally, the adjustment screws are mounted on the wrong sides of the housing, so they cannot be adjusted after installed. Because of this, I popped the lights out of the supplied housing and installed them into the stock housings. If you decide to do this, here is what I did: 2.a. Unscrew the philips head adjustment screw from the old fog lights completely, be careful not to lose the spring or the screw. Both of these will be reused for the new fog light. 2.b. Pop out the light from the old housing. There are two tabs on the sides of the light that secure it in the housing, you just gentle pry away the housing away from these tabs to release the light. 2.c. Install the new lights into the old housing. The fit should be as snug as the factory fit. Make sure the fog lights have full range of motion up and down. I had to cut off a little 1/8" tab on the back side of the old housings that were interfering with the full range of motion. This was done with a box cutter. 2.d. Install the old adjustment screws and springs. The adjustment screws will thread into the new lights with some effort since the threads are more coarse, but the diameter is the same. You just end up rethreading the housing. This enables you to adjust the lights using the factory holes in the frame and is a much more robust installation! 3. Reinstall the fog lights, plug them in, reinstall the splash guard, trim, and grille, and adjust the fog lights as needed. As you can see, there is a little bit of modification required if you want a quality install, but the lights are great quality.

### ⭐⭐⭐⭐⭐ Great Lights. Awesome Customer Service.
*by T***K on October 27, 2019*

***Great Customer Service*** First off, I have to give credit to LX-LIGHT for their exceptional customer service and product support. I bought these lights in late 2017 but never had a chance to install them until now. These were shipped to my house in the states while I was on military orders to Japan. When I came back home in late 2019 and was finally able to install them, one of the fog lights had a rattle. I took a chance and asked LX-LIGHT if I could obtain a replacement just for that one fog. They were extremely nice and ensured me that they will take care of everything. I sent them a picture my install and a week later, I got a new set of lights...no fuss! They really went above and beyond and exceeded my expectation in every way. They really do stand by their products! ***Awesome Lights*** This is really a great looking set of lights. Installation was easy and straight forward. You definitely need to take the grill off. Detach the turn signal harnesses or bulbs. If you have stock bumpers, remove the plastic panel covering the frame behind it for easy access to the fog lights. Fitment was generally pretty spot-on. My passenger side headlight was a little tight fitting when trying to seat it in, but trust me, it fits. The fog lights also included harnesses to adapt its connectors to your existing wiring. No modification needed! Afterward, put everything back on and adjust the beam. You will have to adjust the aim of your beam down a bit for these lights. They are super bright and fills the road very well. Check out the pictures I uploaded. The one at night is low beam on the freeway. Overall, I am satisfied with this purchase. Thank you!

### ⭐⭐⭐⭐ Nice and bright, huge improvement over stock, read for install notes!
*by J***F on December 21, 2018*

Bottom line up front: 4 stars because the lights are great, only reason its not a full 5 is because the passenger side headlight needs trimming. Now for the detailed write up and instructions. These are such a huge improvement over stock JK headlights and fog lights. Time will tell if they hold up any amount of time because some reviews on here seem to suggest they may not last long. If that day comes I will adjust this review, but for now I give them 4 stars....the only reason they do not get 5 is for fitment on the passenger side headlight like several other people mentioned which I will explain in detail. The install took me 20 minutes because I have taken the grille assembly and bumper off several Jeeps and I am quite familiar. For the average person who is not so familiar I would say give yourself an 1 to 1.5 hours. TOOLS Phillips head screwdriver T15 Torx (easiest when attached to a screwdriver type handle, but a socket wrench with an extension works fine too) Flat head screwdriver Pliers 4 wire T-Taps (for the fog lights only, they have to be hard wired in) Metal file or a Dremel tool REMOVE THE GRILLE -Raise and support the hood -Use the flat head screwdriver to pop out the centers of the 6 plastic pop rivets that are along the top of the grille, then pull out the inner part of the pop rivet, set aside for later. -Reach around under the fender on each side and twist out the turn signal lights and let them hang in place -Starting at the top grasp each side and pull forward to release the metal holding tabs, then work each bottom corner out (those tabs are slightly above where the turn signals were) REMOVE THE HEADLIGHTS -Use the T15 torx bit to remove the 4 screws holding the headlight assembly and headlight ring in place. Note the headlight and trim ring can fall out once you get the 4th screw removed, have a hand on it to steady it just in case. -Remove the electrical connection on each headlight and set the headlight assembly and trim rings aside. REMOVE THE FOG LIGHTS (if replacing them also) -Disconnect the electrical connections by sliding the locking tab towards the back of the Jeep, then press down on the thumb tab and pull. -At this point you have two choices, remove the bumper fascia, or just loosen it....loosening is the easiest option so I will cover that for the most part. Removing it involves 4 bolts, two on each end. The fascia can be removed without removing the whole bumper itself by lifting it in an upwards and forward motion to clear the tow hooks. -Regardless if you choose to loosen or remove completely the location of the 2 bolts on each side are hard to explain easily but just run your hand along the back of the plastic portion of the bumper, you will feel a recessed portion and they are in there. The 8 larger bolts (4 on each side) as you get closer to the frame rail are for removing the entire bumper, metal, plastic fascia and all. Loosen or remove those bolts to remove the fascia...however you prefer. -Remove the 2 screws that hold the plastic trim panel that sits inside the front bumper (basically where a winch would sit is the plastic piece I am talking about). Once the plastic screws are out, pull the piece off the jeep to give you more room for fog light access. NOTE if you remove the bumper this portion does not apply. -Locate the fog light housing, and the 4 phillips screws that hold each light in place. They are on all 4 corners of the fog lights. Remove them to pull the fog lights out, housing and all. HEADLIGHT INSTALL -place each new light in the old trim rings from the factory headlights noting the orientation of how they fit in relation to the holes on the trim ring, they can only go on one way. -Driver headlight: this light will seat perfectly, the DOT stamp on the headlight should be on the top and the notched portions will seat into the headlight panel on the Jeep. Once seated firmly, screw the trim ring back on using the T15 torx screws. -Passenger side: note this one needs a slight trim. Before you trim the light, attempt to mount the headlight first, you will likely find that the notched portions dont want to fit right. Place the headlight face up on a table so you are looking at the LEDs/front of the assembly and the DOT stamp is on top. Now look at the top left portion of the headlight...that notch on the back is the one you want to file a little. Dont file it too much or try to completely remove it, just work it enough so that you round off the outer edge still leaving it mostly in-tact. -Take the now filed light back over to the Jeep and pop it in place, if you filed correctly it should take minimal force to get it popped into position....once you get it in place be sure not to let it go and have the trim rind and a screw ready, it may pop back out from tension. If it just does not fit, take a look and file a little more on that same notch. -Once each headlight is back on DO NOT PUT THE GRILLE BACK ON YET IF YOU ARE ALSO REPLACING THE FOG LIGHTS (if you left the bumper on that is)! The gap created by the grille not being there gives you a lot more room to work with. FOG LIGHT INSTALL -Remove the electrical connections from the fog lights if they are connected out of the box (mine were). What you want to look for, is the connector that has the plug on one end which fits the fog light connector, and the two open wires on the opposite end. -Using the T-Taps and pliers, connect the open ended wires to your factory fog light wiring as follows. -Back at the front of your Jeep, locate the fog light wiring behind the bumper. Pull the plastic wire shielding tube apart slightly so that you can pull the factory wires through the protective sheathing. -Attach the black wire to the black wire from the new fog light wiring harness, and the white and red striped wire on the Jeep side to the red wire on the new light wire harness. -Wrap with electrical tape to ensure it stays clean and undamaged (also wrap the stock connector that you are no longer using, or you could just cut it off if you wanted to but I like to keep those stock connectors on in case people swap factory equipment back in before trading a Jeep in/selling/whatever). -Reinstall the fog light using the 4 phillips screws. NOTE that the new lights are shaped just like the old ones, the two larger mounting tabs on each light are the top portion. -Attach the plastic trim piece (the "where a winch would normally be" plastic part) using the 2 plastic screws from earlier. -Tighten down or reattach the bumper fascia or bumper itself however you decided to take it apart earlier. -Pop the grille back in by starting at the bottom corners and aligning the metal tabs just above the turn signal lights, then work your way along the top securing all of those metal clips. -Put all the plastic rivets back in along the top of the grille (just push them in) DONE! It sounds like a lot but its incredibly simple provided I am not a horrible instruction writer!

## Frequently Bought Together

- LX-LIGHT DOT Approved 7'' Black LED Headlights + 4 '' LED Fog Lights Compatible with Jeep Wrangler 97-2017 JK TJ LJ
- DOT Approved 4D LED Tail Lights with 30W Super Bright Reverse Light Compatible with 2007-2018 Jeep Wrangler JK JKU 2 Door / 4 Door, EMC Build-in

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.tn/products/33275545-dot-approved-7-black-led-headlights-4-led-fog-lights](https://www.desertcart.tn/products/33275545-dot-approved-7-black-led-headlights-4-led-fog-lights)

---

*Product available on Desertcart Tunisia*
*Store origin: TN*
*Last updated: 2026-07-23*