--- product_id: 33755893 title: "AmeriGlo GL-101R I-Dot Green Tritium Single Dot No Outline Rear Sight" brand: "ameriglo" price: "357.72 DT" currency: TND in_stock: true reviews_count: 8 url: https://www.desertcart.tn/products/33755893-ameriglo-gl-101r-i-dot-green-tritium-single-dot-no store_origin: TN region: Tunisia --- # AmeriGlo GL-101R I-Dot Green Tritium Single Dot No Outline Rear Sight **Brand:** ameriglo **Price:** 357.72 DT **Availability:** ✅ In Stock ## Quick Answers - **What is this?** AmeriGlo GL-101R I-Dot Green Tritium Single Dot No Outline Rear Sight by ameriglo - **How much does it cost?** 357.72 DT with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.tn](https://www.desertcart.tn/products/33755893-ameriglo-gl-101r-i-dot-green-tritium-single-dot-no) ## Best For - ameriglo enthusiasts ## Why This Product - Trusted ameriglo brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description The AmeriGlo i-dot night sight sets have a green tritium lamp front, one green tritium lamp rear (centered below notch) for Glocks. Designed for simple front sight acquisition while retaining rear illumination. ## Features - About this item - The night sight designed for comfortable use in low-light conditions and compatible with Glock 17/19/22/23/24/26/27/33/34/35/37/38/39 ## Images ![AmeriGlo GL-101R I-Dot Green Tritium Single Dot No Outline Rear Sight - Image 1](https://images-na.ssl-images-amazon.com/images/I/41PASbNAm2L.jpg) ![AmeriGlo GL-101R I-Dot Green Tritium Single Dot No Outline Rear Sight - Image 2](https://images-na.ssl-images-amazon.com/images/I/61ApuegMm0L.jpg) ![AmeriGlo GL-101R I-Dot Green Tritium Single Dot No Outline Rear Sight - Image 3](https://images-na.ssl-images-amazon.com/images/I/416KrZp3IeL.jpg) ![AmeriGlo GL-101R I-Dot Green Tritium Single Dot No Outline Rear Sight - Image 4](https://images-na.ssl-images-amazon.com/images/I/41dtfeWDPZL.jpg) ![AmeriGlo GL-101R I-Dot Green Tritium Single Dot No Outline Rear Sight - Image 5](https://images-na.ssl-images-amazon.com/images/I/41bnqPWBrwL.jpg) ## Customer Reviews ### ⭐⭐⭐⭐⭐ Too easy! *by B***A on Reviewed in the United States on May 19, 2018* Arrived and installed while eating breakfast.FYI, this one actually came with a front sight screw. I ordered one from Midway and it didn't, although the product description said it would.Anyhoo...Step one - use a lighter, no longer than 3-4 seconds, to heat up the loctite on the old screw right before using the [Brownells Glock GT4 Front Sight Tool] or whatever tool you have to remove it. Apply heat to screw head inside slide (NOT to front sight - just say'n).NOTE: with few exceptions, most complaints about various front sight tools not working can be alleviated by heating up the front sight screw from inside the slide.Step two - remove old plastic sight.Step three - insert new steel sight and partially screw in the included screw. Add in a small drop of BLUE Loctite down through the front sight screw hole from the top.Step four - snuggly tighten the screw and wipe off excess Loctite. Done.DO NOT GORILLA FIST THE SCREW TIGHT.Enjoy! ### ⭐⭐⭐⭐⭐ A quality product! *by K***N on Reviewed in the United States on May 18, 2018* I liked my factory glock sights, except for the fact that they were made of plastic. After I put 1 little dent in my front post I ordered this as well as a steel rear sight. Works great, though I will say it's a bit longer from front to back than the original (not that this makes much of a difference in any way, as it's still the same factory height). The dot is also larger with a small flat spot along the top edge, which actually makes it a little easier to line up. Would recommend it just for the added durability alone. ### ⭐⭐⭐⭐⭐ Easy to install. *by S***O on Reviewed in the United States on March 31, 2018* Perfect! Installed in 3 minutes. There are no instructions with this sight, technically it's self explanatory, however, I suggest you insert the small hex head screw through the bottom of your slide. Use needle nose pliers. Have the slide upside down. Place the site on the bolt and with a finger pressing on the hex head, turn the site onto the bolt until you can go no further. I then pushed the site in, and used pressure with my finger to turn and tighten the hex head. Go as far as you can with finger pressure and turn, then use the needle nose to tighten further. I'm explaining this because of some of the reviews that had a hard time getting it on. --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.tn/products/33755893-ameriglo-gl-101r-i-dot-green-tritium-single-dot-no](https://www.desertcart.tn/products/33755893-ameriglo-gl-101r-i-dot-green-tritium-single-dot-no) --- *Product available on Desertcart Tunisia* *Store origin: TN* *Last updated: 2026-07-08*