--- product_id: 44854089 title: "Assembled Extruder Hot End Set for 3D Printer DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length)" brand: "camping family" price: "139.49 DT" currency: TND in_stock: false reviews_count: 7 category: "Industrial" url: https://www.desertcart.tn/products/44854089-assembled-extruder-hot-end-set-for-3d-printer-diy-hotend store_origin: TN region: Tunisia --- # Assembled Extruder Hot End Set for 3D Printer DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length) **Brand:** camping family **Price:** 139.49 DT **Availability:** ❌ Out of Stock ## Quick Answers - **What is this?** Assembled Extruder Hot End Set for 3D Printer DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length) by camping family - **How much does it cost?** 139.49 DT with free shipping - **Is it available?** Currently out of stock - **Where can I buy it?** [www.desertcart.tn](https://www.desertcart.tn/products/44854089-assembled-extruder-hot-end-set-for-3d-printer-diy-hotend) ## Best For - camping family enthusiasts ## Why This Product - Trusted camping family brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description Save 50% on 3D Printer Nozzle Cleaning Kit when you purchase 1 or more 3D Printer Assembled Extruder Hot End Set from our shop:https://www..com/dp/B07KQZRKW6 ADD BOTH TO CARTMK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/40WMaterial: Aluminum and Stainless Steel and BrassPackage Including:1*Assembled Extruder Hot EndExtra 10*30mm Length Extruder 1.75mm TubeExtra 7*0.4mm NozzlesExtra 1*0.2mm NozzlesExtra 1*0.3mm NozzlesExtra 1*0.5mm NozzlesComes assembled extruder so that you can replace your 3d printer extruder parts directly. Plenty of nozzles and tubes campatible with many 3d printers in the market, which make it easier to exchanged or replace your 3d printer extruder. ## Features - Offers you an easy way to upgrade your hotend with plenty of MK8 brass extruder nozzles for 1.75mm Filament, including 0.4mm(7pcs), 0.2mm(1pc), 0.3mm(1pc) and 0.5mm(1pc). - 12V/40W high temperature resistance heater catridge(wire length 1M/39.4inches), operating temperature range:0~+280°C (0~+538°F) - Aluminium heater block 20*20*10mm, comes with a necessary screw. Working perfectly with everyday filaments like PLA and ABS. Note: heat block inner hole for set screw: M6 and M3. - 30mm Length Extruder 1.75mm Tube, made from Aluminum. Compatible with 1.75mm PLA ABS 3D printer. Reduces extrusion force and improve reliability of retractions thanks to the improved internal surface finish. - You can repair your extruder with this kit instead of replacing a new one when your extruder suffers a clog that can’t be fixed. A great replacement hot end for MK8, i3, E3D, Anet A8, Alunar M508, CR7, V2 etc. ## Images ![Assembled Extruder Hot End Set for 3D Printer DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length) - Image 1](https://images-na.ssl-images-amazon.com/images/I/51l3Jh4GDcL.jpg) ![Assembled Extruder Hot End Set for 3D Printer DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length) - Image 2](https://images-na.ssl-images-amazon.com/images/I/51IyAJ9Y2gL.jpg) ![Assembled Extruder Hot End Set for 3D Printer DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length) - Image 3](https://images-na.ssl-images-amazon.com/images/I/51Ln950JQaL.jpg) ![Assembled Extruder Hot End Set for 3D Printer DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length) - Image 4](https://images-na.ssl-images-amazon.com/images/I/41kZ0nNMM-L.jpg) ![Assembled Extruder Hot End Set for 3D Printer DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length) - Image 5](https://images-na.ssl-images-amazon.com/images/I/412Y10PEeVL.jpg) ## Customer Reviews ### ⭐⭐⭐ Overall a good value, with some issues... *by M***. on March 11, 2018* I actually bought this because the PTFE liner in my stock hotend throat finally clogged, and I needed a replacement throat. So, I used one of these throats in my old hotend, and the rest are spare parts (always need spares in the 3D printing world!).The throats worked great, nice threading and no leaks. The hotend itself seems to be pretty good quality. I like that they have a brass insert holding the thermistor in place.Nozzles selection is nice, mine came with one 0.2, one 0.3, several 0.4, and one 0.5. Again, I haven't tried any of them yet, so I can't comment on whether they work or not, but they seem to be reasonable quality. They are in a labeled bags, but per a previous reviewer, the nozzles themselves don't appear to be marked... so as long as you keep them in the bags, you're fine.UPDATE: I didn't tighten up the connection between the throat and the nozzle on my stock heater block properly (Alunar M508). Was printing PETG, and ended up with a mess of PETG in the threads and all over the top of my old heater block. Unable to get the throat out easily, I ended up installing the hotend.An issue presented itself right away. The brass insert they crimp onto the thermistor was done a bit too aggressively, as it was shorting out the thermistor (panel was showing the hotend at 358C). With some careful use of pliers, I was able to "uncrimp" it enough to resolve the issue... luckily the thermistor glass bead was undamaged.I am also using the nozzle that came with this. I ensured that the connection between the nozzle and the throat was good and tight this time. I'm printing now and it seems to be working just fine. ### ⭐⭐ The sting of low quality remains long after the thrill of low price has faded away. *by F***E on August 2, 2018* well...ya gotta admit the price is great. And the extras....extra tubes, extra nozzles....it's all good, right? That's what I thought. Due to thumb-fingered clumsiness I managed to pull the thermistor wires out of my head, so I ordered this as a replacement head. But once I installed it, I noticed that it had trouble coming up to temp for ABS printing. Set the temp at 240 and wait....and wait...and wait....while the readout says 210; 209;210.3; 209; 210.5; 209.1....you get the idea. Extremely frustrating to say the least. Ah but the nozzles and tubes! First nozzle I installed plugged after one print. Changed it out and then there appeared a huge molten PLA leak which ruined my next print; took the head apart, filament tube broken across the threads. Installed new tube and another nozzle; got two prints out of it before it clogged. I'm now on nozzle 3 and at this rate I'll be sidelined soon. Before I started trying to use this kit stuff my printer worked great, came up to temp fast, never clogged, never leaked, I sure wish I had not pulled out those thermistor wires. I'm gonna get a factory OEM replacement part, and throw this stuff into the dustbin. ### ⭐⭐⭐⭐⭐ Works great! Modified my Monoprice Maker Selece V2 / Wanhao Duplicator i3 for the perfect fit! *by J***Y on January 26, 2019* I purchased this knowing it would probably not correctly fit the original extruder bar mount. At the same time I purchased one that would. My intention was either returning this or modifying the printer. i ended up performing the modification. With the right tools it isn't a big deal.In the photos attached you will the the original bar mount that comes with the Monoprice Maker Selece V2 / Wanhao Duplicator i3. The large hole is the hole for the MK10 hotend that is stock. Next next largest hole is new. I used a drill press to create it on the opposite side. It is spaced and centered like the original hole, just on the opposite side. I also purchased a metric #6 tap from Home Depot for about $5 to thread the new hole.Due to very small alignment issues with my new hole, I decided to only insert the metal tube about half way into the bar mount. I then used PTFE tubing to guide the filament. Note that the tubing is cut to perfect length right up to the extruder gears. Start long and shave it down slowly for the perfect fit.The included nut is used to lock the metal tube in place. I also used a little heat-sink compound.For the actual hot-end. It comes with some decently long wires. I cut them down to length. Used the same connector for the termistor and my own connection for the heater. I also wrapped the hole block in insulation secured with kapton tape.I needed to make modifications to the z-axis limit switch because ended up being about 1/4" longer than the original hot-end. But I do have a glass bed that adds about 1/4" and I probably could have put the metal tube in a bit more.So now have a bar mount that accepts the original style hot-end as well as this alternative style. So far I feel this one performs better than the original. --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.tn/products/44854089-assembled-extruder-hot-end-set-for-3d-printer-diy-hotend](https://www.desertcart.tn/products/44854089-assembled-extruder-hot-end-set-for-3d-printer-diy-hotend) --- *Product available on Desertcart Tunisia* *Store origin: TN* *Last updated: 2026-05-06*