---
product_id: 476135765
title: "Teyleten Robot 1.28 Inch TFT LCD Display Module Round RGB 240 * 240 GC9A01 Driver 4 Wire SPI Interface 240x240 PCB for Arduino 3PCS"
brand: "teyleten robot"
price: "158.79 DT"
currency: TND
in_stock: true
reviews_count: 5
category: "Teyleten Robot"
url: https://www.desertcart.tn/products/476135765-teyleten-robot-1-28-inch-tft-lcd-display-module-round
store_origin: TN
region: Tunisia
---

# 3-5V low voltage operation 240x240 vibrant RGB resolution 1.28-inch compact size Teyleten Robot 1.28 Inch TFT LCD Display Module Round RGB 240 * 240 GC9A01 Driver 4 Wire SPI Interface 240x240 PCB for Arduino 3PCS

**Brand:** teyleten robot
**Price:** 158.79 DT
**Availability:** ✅ In Stock

## Summary

> 🔄 Round up your UI game with vibrant, compact brilliance!

## Quick Answers

- **What is this?** Teyleten Robot 1.28 Inch TFT LCD Display Module Round RGB 240 * 240 GC9A01 Driver 4 Wire SPI Interface 240x240 PCB for Arduino 3PCS by teyleten robot
- **How much does it cost?** 158.79 DT with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.tn](https://www.desertcart.tn/products/476135765-teyleten-robot-1-28-inch-tft-lcd-display-module-round)

## Best For

- teyleten robot enthusiasts

## Why This Product

- Trusted teyleten robot brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Value 3-Pack:** Get three consistent, ready-to-go modules—ideal for multi-display setups or spares.
- • **Compact Round Display:** Sleek 1.28" IPS screen fits perfectly in modern, space-conscious projects.
- • **Robust Operating Range:** Works flawlessly from -20°C to 70°C, built for diverse environments.
- • **Seamless SPI Interface:** 4-wire SPI ensures fast, reliable communication with Arduino and Teensy boards.
- • **Vivid True-Color Graphics:** 240x240 pixel density with full RGB color for crisp, eye-catching visuals.

## Overview

The Teyleten Robot 1.28 Inch TFT LCD Display Module features a sharp 240x240 resolution on a compact round IPS screen, driven by the GC9A01 chip. Designed for Arduino and similar microcontrollers, it operates on a low 3-5V supply with a fast 4-wire SPI interface. This 3-pack offers consistent color and performance, perfect for polished, modern embedded projects requiring vivid visuals and reliable operation across a wide temperature range.

## Description

1.VCC:Power 2.GND:Power Ground 3.SCL:This pin is used to be serial interface clock 4.SDA:SPl interface input/output pin.the data is latched on the rising edge of the SCL signal. 5.DC:Display data/command selection pin in 4-line serial interface 6.CS:Chip selection pin;Low enable, high disable 7.RST:This signal will reset the device and it must be applied to properly initialize the chip.Signal is active low.

Review: Happy with these displays! - These small displays are exactly what I wanted for compact, polished UI elements—think clocks, gauges, and animated “eyes.” Colors are vibrant, brightness is solid for indoor projects, and text/graphics are crisp thanks to the tight pixel density. I had them running in minutes on Teensy using available libraries (TFT_eSPI / Adafruit_GFX with GC9A01 support), and refresh performance is snappy enough for smooth animations. The 3-pack is great value for multi-display builds or spares, and all three modules were consistent in color and alignment. Also: they’re happiest at 3.3V logic; if you’re on a 5V board, use level shifting or the 3.3V pin. Overall, reliable, easy to integrate, and perfect for projects where a round, modern look makes the difference.
Review: Comme décrit - Les 3 écrans sont arrivé emballés chacun dans leur était et sont tous fonctionnel. Je les aies mis sous 3.3v .. certaines spec disent 3.3 et 5 .. mais je ne sais pas si je m'y risquerait comme is fonctionnent bien sous 3.3V. on les voit parfois directement connecter à des Arduino Nano, mais certains NANO sont en 3.3V. je les aies connecté à un DUE

## Technical Specifications

| Specification | Value |
|---------------|-------|
| Brand | Teyleten Robot |
| CPU model | Core i7 |
| Connectivity technology | SPI |
| Included components | Display module, Interface cables (VCC, GND, SCL, SDA, DC, CS, RST) |
| Model name | Teyleten Robot |
| Operating system | Linux |

## Product Details

- **Brand:** Teyleten Robot
- **CPU model:** Core i7
- **Connectivity technology:** SPI
- **Included components:** Display module, Interface cables (VCC, GND, SCL, SDA, DC, CS, RST)
- **Model name:** Teyleten Robot

## Images

![Teyleten Robot 1.28 Inch TFT LCD Display Module Round RGB 240 * 240 GC9A01 Driver 4 Wire SPI Interface 240x240 PCB for Arduino 3PCS - Image 1](https://m.media-amazon.com/images/I/61HPJDjXGKL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ Happy with these displays!
*by K***R on 31 August 2025*

These small displays are exactly what I wanted for compact, polished UI elements—think clocks, gauges, and animated “eyes.” Colors are vibrant, brightness is solid for indoor projects, and text/graphics are crisp thanks to the tight pixel density. I had them running in minutes on Teensy using available libraries (TFT_eSPI / Adafruit_GFX with GC9A01 support), and refresh performance is snappy enough for smooth animations. The 3-pack is great value for multi-display builds or spares, and all three modules were consistent in color and alignment. Also: they’re happiest at 3.3V logic; if you’re on a 5V board, use level shifting or the 3.3V pin. Overall, reliable, easy to integrate, and perfect for projects where a round, modern look makes the difference.

### ⭐⭐⭐⭐⭐ Comme décrit
*by C***E on 19 September 2023*

Les 3 écrans sont arrivé emballés chacun dans leur était et sont tous fonctionnel. Je les aies mis sous 3.3v .. certaines spec disent 3.3 et 5 .. mais je ne sais pas si je m'y risquerait comme is fonctionnent bien sous 3.3V. on les voit parfois directement connecter à des Arduino Nano, mais certains NANO sont en 3.3V. je les aies connecté à un DUE

### ⭐⭐⭐⭐⭐ Works well with TFT_eSPI and ESP32 D1 Mini
*by D***I on 7 July 2024*

Each device came in a separate plastic case within an anti-static bag. Below is the minimum config (User_Setup.h) you can use for this display and it will work. Change PIN numbers to suit your needs for your ESP module. #define GC9A01_DRIVER // For CYD ESP32-2432S028 #define TFT_WIDTH 240 #define TFT_HEIGHT 240 // For ESP32 Dev board (only tested with GC9A01 display) // The hardware SPI can be mapped to any pins #define TFT_MOSI 21 //SDA In some display driver board, it might be written as "SDA" and so on. #define TFT_SCLK 22 //SCL #define TFT_CS 16 //CS Chip select control pin #define TFT_DC 17 //DC Data Command control pin #define TFT_RST 4 //RST Reset pin (could connect to Arduino RESET pin) // Comment out the #defines below with // to stop that font being loaded // The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not // normally necessary. If all fonts are loaded the extra FLASH space required is // about 17Kbytes. To save FLASH space only enable the fonts you need! #define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH #define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters #define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters #define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm #define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-. #define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT #define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts // Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded // this will save ~20kbytes of FLASH #define SMOOTH_FONT // Define the SPI clock frequency, this affects the graphics rendering speed. Too // fast and the TFT driver will not keep up and display corruption appears. // With an ILI9341 display 40MHz works OK, 80MHz sometimes fails // With a ST7735 display more than 27MHz may not work (spurious pixels and lines) // With an ILI9163 display 27 MHz works OK. // #define SPI_FREQUENCY 1000000 // #define SPI_FREQUENCY 5000000 //#define SPI_FREQUENCY 10000000 //#define SPI_FREQUENCY 20000000 //#define SPI_FREQUENCY 27000000 #define SPI_FREQUENCY 40000000 //#define SPI_FREQUENCY 55000000 // STM32 SPI1 only (SPI2 maximum is 27MHz) // #define SPI_FREQUENCY 80000000

## Frequently Bought Together

- Teyleten Robot 1.28 Inch TFT LCD Display Module Round RGB 240 * 240 GC9A01 Driver 4 Wire SPI Interface 240x240 PCB for Arduino 3PCS
- ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA Compatible with Arduino IDE (3PCS)
- Waveshare 2inch Mini LCD Screen - Compatible with Raspberry Pi/Arduino/STM32, 240x320 Resolution IPS LCD Display, 262K RGB Color, Embedded ST7789VW Driver, SPI Interface

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.tn/products/476135765-teyleten-robot-1-28-inch-tft-lcd-display-module-round](https://www.desertcart.tn/products/476135765-teyleten-robot-1-28-inch-tft-lcd-display-module-round)

---

*Product available on Desertcart Tunisia*
*Store origin: TN*
*Last updated: 2026-06-25*