---
product_id: 538457232
title: "Pack of 10 N Male Plug Crimp Rf Coaxial Connector 50 ohm for LMR400 Belden 9913 RG8 Nickel Machined Brass Construction"
brand: "riotaxy"
price: "13.15 DT"
currency: TND
in_stock: false
reviews_count: 5
url: https://www.desertcart.tn/products/538457232-pack-of-10-n-male-plug-crimp-rf-coaxial-connector
store_origin: TN
region: Tunisia
---

# Pack of 10 N Male Plug Crimp Rf Coaxial Connector 50 ohm for LMR400 Belden 9913 RG8 Nickel Machined Brass Construction

**Brand:** riotaxy
**Price:** 13.15 DT
**Availability:** ❌ Out of Stock

## Quick Answers

- **What is this?** Pack of 10 N Male Plug Crimp Rf Coaxial Connector 50 ohm for LMR400 Belden 9913 RG8 Nickel Machined Brass Construction by riotaxy
- **How much does it cost?** 13.15 DT with free shipping
- **Is it available?** Currently out of stock
- **Where can I buy it?** [www.desertcart.tn](https://www.desertcart.tn/products/538457232-pack-of-10-n-male-plug-crimp-rf-coaxial-connector)

## Best For

- riotaxy enthusiasts

## Why This Product

- Trusted riotaxy brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Review: I'll never go back to solder-style connectors - For years I've fought with N-connectors. I love them for function...but I hate assembling them. Probably because I've picked up loads of used solder-style N-connectors at swap meets and have disassembled and reassembled them with mixed success. Boy, are there a lot of different types; externally they all look alike but internally there is quite a variety. I finally treated myself to the crimp style, which of course means I had to buy a crimping tool. I bought the rmsdeal77, also at desertcart because it has the die for LMR400 and at $28 seemed like a reasonable price (see my separate review for the crimping tool). And I bought this 10-pack of N connectors by Riotaxy. Price seemed fair and I appreciated that they show the engineering dimensions of the connector. As you know, LMR400 has a copper-plated aluminum inner conductor, which seems to be just a skootch larger in diameter than some N-connector center pins will accept. These Riotaxy connectors fit the inner conductor just fine. Upon receiving the connectors and the crimping tool I went ahead and installed a couple of N-connectors on a 100ft length of LMR400. Here are a few hints that might help you out - I found that a hacksaw is a good way to cut the cable before installing the connector. You can use a large wire cutter but it tends to somewhat distort and crush the inner dielectric foam. You want a perfect circular cross-section to crimp to. There are some YouTube videos that show how to crimp an N-connector that are worth a view. I don't have a fancy LMR400 cable stripper tool; I just used a sharp pen knife. For dimensions, you can find on the web a PDF chart by Amphenol called "Assembly Instructions - C11 N-Type" that shows how far back to strip the jacket and how much inner conductor to expose for a variety of cables. This worked fine for my LMR400. I used a micrometer to measure where to cut. These connectors allow you to either solder the center pin, or crimp it. Being a Chinese connector, which are notorious for using metal platings that are very difficult to solder, I elected to crimp the center pin. Note - of the 10 connectors I got, 9 of them had center pins that allow soldering, having the tiny little hole on the side where you introduce the solder. One of them had no hole. I'll assume this was a QC problem. Didn't matter to me because I was going to crimp anyway, but I would have been annoyed if I had intended to solder it. The rmsdeal77 tool crimps the center conductor perfectly - use the 0.128 slot on its die. And of course, use the large 0.429 slot on the die for the outer ferrule. I firmly tugged on both the center pin crimp and the ferrule ring crimp and they were both secure. One last piece of advice - unless you're a "what could possibly go wrong?" type of person, use an ohmmeter and check that you don't have a short between the center conductor and outer shield before you make that ferrule crimp. Just one whisker of shield touching the center conductor will ruin the entire operation. And there is no going back once you've made the ferrule crimp. Just saying. N-connectors are favored because they are water-tight. If you've taken apart standard solder-type N-connectors you can see the various rubber gaskets inside. These Riotaxy connectors do not appear to have internal gaskets other that the large red one inside the shell where it mates to the female receptacle. The connector comes with a short length of heat shrink that is to be shrunk over the outer ferrule. I think this is where the resistance to water getting into the outer shield comes from. So don't forget to 1) slip it over the cable BEFORE you assemble the connector, and 2) definitely slide it over the ferrule and heat shrink it once you've made the ferrule crimp.
Review: Excellent Quality - Used on some LMR400 and it fit perfectly.

## Technical Specifications

| Specification | Value |
|---------------|-------|
| ASIN | B0779ZQKS8 |
| Brand | Riotaxy |
| Brand Name | Riotaxy |
| Cable Type | Coaxial |
| Connector Type | Coaxial |
| Customer Reviews | 4.6 out of 5 stars 216 Reviews |
| Frequency | 6 GHz |
| Item Shape | Round |
| Model Number | N-C-J400-2 |
| Net Quantity | 10.0 Count |
| Number of Items | 10 |
| Outer Material Type | Other |
| Part Number | N-C-J400-2 |
| Shape | Round |
| UPC | 659103947707 |
| Unit Count | 10.0 Count |

## Product Details

- **Brand:** Riotaxy
- **Cable Type:** Coaxial
- **Connector Type:** Coaxial
- **Frequency:** 6 GHz
- **Shape:** Round

## Images

![Pack of 10 N Male Plug Crimp Rf Coaxial Connector 50 ohm for LMR400 Belden 9913 RG8 Nickel Machined Brass Construction - Image 1](https://m.media-amazon.com/images/I/71z7NMnMFML.jpg)
![Pack of 10 N Male Plug Crimp Rf Coaxial Connector 50 ohm for LMR400 Belden 9913 RG8 Nickel Machined Brass Construction - Image 2](https://m.media-amazon.com/images/I/61szVVcb6kL.jpg)
![Pack of 10 N Male Plug Crimp Rf Coaxial Connector 50 ohm for LMR400 Belden 9913 RG8 Nickel Machined Brass Construction - Image 3](https://m.media-amazon.com/images/I/61cw69eX-aL.jpg)
![Pack of 10 N Male Plug Crimp Rf Coaxial Connector 50 ohm for LMR400 Belden 9913 RG8 Nickel Machined Brass Construction - Image 4](https://m.media-amazon.com/images/I/71GMv5Eqc2L.jpg)
![Pack of 10 N Male Plug Crimp Rf Coaxial Connector 50 ohm for LMR400 Belden 9913 RG8 Nickel Machined Brass Construction - Image 5](https://m.media-amazon.com/images/I/61AQVpKuauL.jpg)

## Questions & Answers

**Q: Will these work with RG214?**
A: I don't believe that it will work with RG214. The jacket dia. for RG214 is .425 and the inside dia. of the crimp sleeve is .424. LMR400 jacket dia. is .405 as well as RG8 and will work with those 2. It would be a tight fit if you try it. Check out these guys, they have what your looking for or shop around and I'm sure you will be able to find what you need. Mike N4CMM

**Q: Where can i get the rg8 cable?**
A: Don't know where you are so can't be exact, but will be available in commercial radio or antenna shops.

**Q: Will these work with RG213?**
A: LMR400 and RG213 have roughly the same dimensions specs, so I would think this work fit.

**Q: Will these ends work with RG 6 ?**
A: no , it is for LMR400 , RG8, Belden 9913 cable

## Customer Reviews

### ⭐⭐⭐⭐⭐ I'll never go back to solder-style connectors
*by R***E on 21 April 2020*

For years I've fought with N-connectors. I love them for function...but I hate assembling them. Probably because I've picked up loads of used solder-style N-connectors at swap meets and have disassembled and reassembled them with mixed success. Boy, are there a lot of different types; externally they all look alike but internally there is quite a variety. I finally treated myself to the crimp style, which of course means I had to buy a crimping tool. I bought the rmsdeal77, also at Amazon because it has the die for LMR400 and at $28 seemed like a reasonable price (see my separate review for the crimping tool). And I bought this 10-pack of N connectors by Riotaxy. Price seemed fair and I appreciated that they show the engineering dimensions of the connector. As you know, LMR400 has a copper-plated aluminum inner conductor, which seems to be just a skootch larger in diameter than some N-connector center pins will accept. These Riotaxy connectors fit the inner conductor just fine. Upon receiving the connectors and the crimping tool I went ahead and installed a couple of N-connectors on a 100ft length of LMR400. Here are a few hints that might help you out - I found that a hacksaw is a good way to cut the cable before installing the connector. You can use a large wire cutter but it tends to somewhat distort and crush the inner dielectric foam. You want a perfect circular cross-section to crimp to. There are some YouTube videos that show how to crimp an N-connector that are worth a view. I don't have a fancy LMR400 cable stripper tool; I just used a sharp pen knife. For dimensions, you can find on the web a PDF chart by Amphenol called "Assembly Instructions - C11 N-Type" that shows how far back to strip the jacket and how much inner conductor to expose for a variety of cables. This worked fine for my LMR400. I used a micrometer to measure where to cut. These connectors allow you to either solder the center pin, or crimp it. Being a Chinese connector, which are notorious for using metal platings that are very difficult to solder, I elected to crimp the center pin. Note - of the 10 connectors I got, 9 of them had center pins that allow soldering, having the tiny little hole on the side where you introduce the solder. One of them had no hole. I'll assume this was a QC problem. Didn't matter to me because I was going to crimp anyway, but I would have been annoyed if I had intended to solder it. The rmsdeal77 tool crimps the center conductor perfectly - use the 0.128 slot on its die. And of course, use the large 0.429 slot on the die for the outer ferrule. I firmly tugged on both the center pin crimp and the ferrule ring crimp and they were both secure. One last piece of advice - unless you're a "what could possibly go wrong?" type of person, use an ohmmeter and check that you don't have a short between the center conductor and outer shield before you make that ferrule crimp. Just one whisker of shield touching the center conductor will ruin the entire operation. And there is no going back once you've made the ferrule crimp. Just saying. N-connectors are favored because they are water-tight. If you've taken apart standard solder-type N-connectors you can see the various rubber gaskets inside. These Riotaxy connectors do not appear to have internal gaskets other that the large red one inside the shell where it mates to the female receptacle. The connector comes with a short length of heat shrink that is to be shrunk over the outer ferrule. I think this is where the resistance to water getting into the outer shield comes from. So don't forget to 1) slip it over the cable BEFORE you assemble the connector, and 2) definitely slide it over the ferrule and heat shrink it once you've made the ferrule crimp.

### ⭐⭐⭐⭐⭐ Excellent Quality
*by D***R on 10 April 2023*

Used on some LMR400 and it fit perfectly.

### ⭐⭐⭐⭐⭐ Good connectors
*by R***. on 10 April 2026*

Excelent quality connectors. Easy to install.

## Frequently Bought Together

- Riotaxy Pack of 10 N Male Plug Crimp Connector 50 ohm for LMR400 Belden 9913 RG8 Nickel Machined Brass Construction (10 Piece N Male for lmr400)
- Crimper Tools for RF connector LMR400,RG8,RG9,Belden 9913,RG213,RG214,RG174,RG316 RF Coaxial Cable,Crimp Tool Hex Die with 0.429" (10.90mm) for all 400 type cables
- Pack of 5 N Female Jack Crimp Connector for LMR400 Belden 9913 RG8 Cable 50 Ohm Low Loss RF Coaxial Cable (N Female Crimp lmr400)

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.tn/products/538457232-pack-of-10-n-male-plug-crimp-rf-coaxial-connector](https://www.desertcart.tn/products/538457232-pack-of-10-n-male-plug-crimp-rf-coaxial-connector)

---

*Product available on Desertcart Tunisia*
*Store origin: TN*
*Last updated: 2026-10-17*