ESM Series LED Light

Arrived yesterday and installed this morning. Installed on my bull bars to replace 2 separate double row ~6 inch Niilight bars. Installation was very easy (took me <20 minutes total). The mounting hardware seems solid, especially compared to the Niilight setup. Bright. This thing is very, VERY bright. Pictures won't do it justice.

I’ve installed a lot of these LED off road lights but this one really impressed me. It’s extremely bright and the light carries far. Hopefully it won’t burn out because for $50 it’s a great deal.

I don't write very many reviews, but this product was too good to not share! The product arrived quickly, and is well designed. I like the adjustments on the mounting system, and it's easy to install. I mounted the bar below my headlights in the bumper, running wires to the back of the headlights. I then jumped power off of the bright switch on the plug behind the headlight. Pictures show regular headlight versus brights and light bar. Turns night time into daytime!

So far I like it! Nice bright, white light. It seems sturdy enough for a $50 light bar. It did not come with any instructions but assembly was simple enough. I might should have got the 20” to fit inside the Baja hoop on my FJ Trailworx bumper but the 18” filled in close enough.My only complaint is after I got it mounted on my steel bumper, adjusting the light bars projection up and down is a PITA!!!! The Allen head bolts are hard to get to cause, if you’re looking at the light bar from the right side, the bolts are in the 4-5 O’clock position. The light bars sits so close to the bumper I couldn’t get the Allen wrench in it to loosen and adjust the light bar. I ended up cutting the short side of the Allen wrench off till it was only 1/4” long and it was still tight. It seems to be a common complaint with this style of light bar mounting system.All in all, it works!

Looks good and easy to install, Really bright and shipped quick! The only thing I noticed is that there are only 3 mounting tabs and my Randy Ellis bar has 4 spots to mount. So more mounts are on order.

Works great, as it should. Just get a wiring harness to make it that much simpler.

Great led bar! Fills up the space on the lower grill of Suburban almost perfectly. Bright!Watched “light bar installation Chevy Suburban” on YouTube, it’s a guy from Michigan - very helpful!Use this wiring harness: MICTUNING HD+ 12 Gauge 600W from Amazon; heavy duty and can support up to 2 light bars

They advertise this as a 272W light bar. So if that is the case, then running it at 12.38 V which is what I am running it at would give be a current of 21.97 amps (P=VI). The light came with 14 GA wire leads. 14 GA in a 12V system would never handle almost 22 amps of current. All the charts I find is 10 GA minimum, 8 GA recommend. So I wired this into my system using the 14 GA and a 10 amp fused switch and low an behold the light runs. If it were truly 272W the fuse should instantly blow, but that is not what happens. Come to find out it runs at about 4 amps. That would be about 50W and seems to be about right.The light is pretty well built, very bright, looks good, and fits what I wanted to do with it. However the claim that this is on par with other lights that are truly 200+ Watts is pure nonsense and false advertising. I would spend a little more and look elsewhere.

really good value