INTEX Excursion 5-Person Inflatable Fishing Boat River Raft Set with Oars

If you want to register your boat and add a trolling motor, follow these instructions: This boat is quite big, and to fully enjoy it, adding a trolling motor is recommended. Paddling a boat of this size is not as easy as paddling a kayak. You don't need to register the boat initially, but if you plan to add a trolling motor, most states will require registration. Some people have complained about the difficulty of registering this boat, but others have succeeded. I took the risk and bought it, and fortunately, I was able to register it without much trouble. Here are some key points to know: You don't need to register the trolling motor, especially if it's electric but you have to register the boat if a trolling motor will be attached to it. These steps generally apply to most states, not just Texas. To save you time, I'll skip sharing my story and provide you with the steps for successful registration: First, you'll need a Bill of Sale for your purchase. Contact Amazon Customer Service and request a Bill of Sale that includes the Hull ID of your boat. Although online stores like Amazon may not provide this document, any written conversation with them can suffice for most registration offices. If you can demonstrate your efforts to obtain the Bill of Sale, such as an email response from Amazon, even if they deny your request, or a chat log (as I did), make sure to print or save it and take it with you to the registration office. In my case, I didn't bring any physical documents, but I explained the steps I took to obtain the Bill of Sale verbally, and they accepted my explanation. Next, you'll need the Manufacturer's Certificate of Origin for the boat. Visit the Intex website (intexcorp dot com) and click on the "Boat Certificate of Origin" link at the bottom of the page. On the subsequent screen, select the boat model you purchased (e.g., Intex Excursion 5). Enter the hull identification number, which can be found on the box or your boat (usually starting with the letter XEE). Once you provide the number, you'll receive your Manufacturer's Certificate of Origin. Print it out and remember to take it to the registration office. Take a photo of your boat where the Hull ID is clearly visible. It's not necessary to inflate the boat for the picture (in my case, the boat was not inflated). Make sure to bring the photo with you. Print the order details of your boat purchase, specifically the page that includes the amount paid, your full name, and address. You can do this on the Amazon website or mobile app. Bring all the necessary documents mentioned above to the registration office in person. Remember that most offices only accept cash or check, not credit or debit cards. Fill out the required form, usually available at the front of the office. In Texas, the form is called PWD-143. After about 10 minutes, your registration should be completed. They will provide you with a registration number, which you must print on your boat, as well as a registration sticker. They will also inform you that your title will be mailed to you. With that, you are ready to go and enjoy your boat! I hope these instructions help others since I couldn't find a YouTube video explaining these steps. The most challenging part is obtaining the Bill of Sale and the Manufacturer's Certificate of Origin. While the online version of the Manufacturer's Certificate of Origin may have a signature, if it's not accepted, you can chat or call Intex, and they will send it to you by mail. In my case, I used the downloaded version from their website and it sufficed for the registration office.

I purchased the INTEX Excursion Inflatable Boat Series with Deluxe 54in Aluminum Oars last summer, and I must say it was an absolute game-changer for our outdoor adventures. This inflatable boat provided an incredible experience at a fantastic price, earning a well-deserved 5-star review. Quality Construction (5/5): The INTEX Excursion Inflatable Boat Series boasts exceptional quality in its construction. The material is durable, resilient, and can withstand the rigors of various water conditions. The seams are well-made, providing confidence in the boat's stability during use. Sturdy Aluminum Oars (5/5): The inclusion of Deluxe 54in Aluminum Oars is a standout feature. These oars are not only sturdy but also lightweight, making rowing a breeze. The aluminum construction ensures durability, and the length is ideal for propelling the boat efficiently. Spacious Design (5/5): The boat's spacious design accommodates multiple occupants comfortably. Whether it's a solo adventure or a trip with friends or family, the ample space ensures everyone has room to enjoy the experience. The boat's capacity is impressive given its inflatable nature. Easy to Inflate and Deflate (5/5): The INTEX Excursion boat is remarkably easy to inflate and deflate. The included pump expedites the process, and the deflation valve allows for quick packing after use. The convenience of setup and takedown enhances the overall user experience. Versatility on Various Water Bodies (5/5): We've taken this inflatable boat to lakes, rivers, and even calm coastal waters, and it has performed admirably in each setting. Its versatility allows for a range of water adventures, making it a versatile investment for outdoor enthusiasts. Great Price Point (5/5): One of the most appealing aspects is the affordability of the INTEX Excursion Inflatable Boat Series. Considering its quality construction, spacious design, and included aluminum oars, the price point is exceptionally reasonable. It offers exceptional value for the investment. Secure and Stable on Water (5/5): The boat's stability on the water is noteworthy. Whether rowing or simply floating, it provides a secure and stable platform. The inflatable keel contributes to smooth navigation, giving users confidence in the boat's performance. Convenient Carry Bag (5/5): The inclusion of a carry bag adds a layer of convenience to transportation and storage. The bag is compact and easy to carry, making it hassle-free to bring the boat along on outdoor excursions. The thoughtful addition of the carry bag enhances the overall user experience. Durable Against Wear and Tear (5/5): Despite regular use throughout the summer, the INTEX Excursion boat has proven to be durable against wear and tear. It has held up exceptionally well, attesting to the quality of materials used in its construction. The boat's resilience adds to its long-term value. Memorable Outdoor Adventures (5/5): Our experiences with the INTEX Excursion Inflatable Boat Series have been nothing short of memorable. From tranquil paddling on lakes to exploring winding rivers, the boat has facilitated countless adventures, creating lasting memories for our family. Overall Satisfaction (5/5): In conclusion, the INTEX Excursion Inflatable Boat Series has far exceeded our expectations. Its quality construction, versatile design, and affordability make it a standout choice for water enthusiasts. I highly recommend this inflatable boat to anyone seeking a reliable and enjoyable watercraft. A solid 5-star rating – this boat has truly enhanced our summer adventures!

As long as you have realistic expectations and don't expect a Zodiac for $120 then this boat is nothing short of impressive. As soon as I got it I made a two-piece wood floor and added a motor and have been blown away by how much utility I've gotten and fun I've had out of such a cheap and simple boat. The best part of this boat, aside from the price, is it's portability and ease of storage. This boat can be folded up entirely to fit in the included bag or partially folded and tucked away in the corner of the garage. It's very quick and easy just to partially deflate and throw it in the back of a short bed pickup/SUV but even if you have a compact car you could fold it back up entirely, it just takes a little longer. It's so light that it can be inflated at your vehicle (electric pump) and then carried down to the shore by one adult and two small children and then drop in the floor boards, motor, and battery. Make a floor for this boat! I intended to add a floor as soon as I ordered this but did take it out once without a floor and it's kind of a pain without one. Just get some treated 4x8 plywood from Home Depot and have them cut it to size before you leave and then just do some light trimming and sanding to profile the ends at home. I did a two-piece floor with hinges and it works great although if you can transport an 8 foot floor a single piece would work even better. I found this boat to be kind of a pain to row due to the flexible oar mounts and flexible hull. You lose a lot of your rowing power due to the mounts and the short oars don't help. If you're getting this boat, I'd recommend doing it right by adding a small trolling motor, simple floor, and keeping the oars just for backup. If you shop around you can have a full setup for around $350 all-in for boat, mount, motor, battery, and floor. If you really want something to enjoy rowing then a proper canoe would be much better. It can be done, and it you just want to get out into the middle of a lake and then back to shore it would be no issue but you'll find rowing any distance is not at all like rowing a canoe. Only downside: low psi hull. I did't expect anything better due to the cost but this is really major downside of this boat. The only issues I've had with this boat are due to the very soft, low pressure hull. The flexing of the hull makes it hard to row, slows it down in the water, and causes the motor transom mount to flex under power if unmodified. I really wish Intex would make a Mariner 5 and I would buy it in a heartbeat but if you need the space this is all they offer.

I got this boat to take out on the local lakes around Indiana so that I could cover more of the lake shores crappie fishing. The boat takes a while to inflate with the pump that comes with it. There are three main chambers to inflate, the floor, the inner hull, and the outer hull. Once inflated the boat is farely sturdy, and I am 260 lbs. The fishing pole holders are a nice addition, and they come with plugs that you attach to your pole and then plug into the holder when you want to row or something other than fish. The boat is very easy to deflate. It only took about 15 minutes to get all the air out so that I could pack into my car. It comes with a large bag, and packed up it fits in the back seat of my 2 door Honda Civic. The two complaints that I have Are that the oars are a little too short, and the repair kit is useless (see paragraph below about the repair kit). They could be about 5 to 10 inches longer. I felt like I was rowing with my arms straight up in the air most of the time, which was incredibly exhausting. I then discovered that I could easily row with one oar while facing forward and my knees on the seat at the bow of the boat. This was much faster and less exhausting. It is stable because the bow of the boat's air chambers are about 2 feet long providing maximum stability for sitting, rowing, or fishing at the bow. You can get a trolling motor mount for this thing, and I think it says it will handle a 1.5 hp motor. I will definitely be getting the trolling motor mounted on it as soon as I get my license and register the boat. The lake permit (Indiana) sticks pretty well to the port side of the bow, but when deflated it wrinkles up. I am hoping it stretches out okay when I inflate the boat again. [UPDATE]: The sticker stretched back out okay, but the edges were coming off a little. I would maybe suggest using the pvc or vinyl glue used for patching. This boat will NOT take a finning from fish. An 8 lbs catfish fell on the gunwale (on the inner hull side) and punched a little hole on top of the inner hull buoyancy chamber. There are 3 buoyancy chambers, so it wasn't a safety concern. I was about 20 minutes from the boat dock, and I made it back with plenty of air in the inner hull's chamber. I attempted to make the repair with the repair kit that came with the boat and that repair kit is terrible. It wouldn't even stick to the boat (fully deflated following all instructions), hence the 4 star review. I ended up going to the closest Walmart and buying a cheap $4.00 Rubber/Nylon repair kit. It held pretty well. All-in-all, this is the perfect boat for a good price if you have no place to store a boat, or if your car won't haul a john boat or something similar.

It floats perfectly holds me andy guests but can't use the device in ruff water lake Michigan lol but it works good

Well if you are reading this you are probably considering buying this boat. Great choice but before you purchase understand this is more than a $150 boat and it has some limitations. First and foremost it does not seat 5 people. It is more of a 2 to maybe 3 adults. 2 adults and a couple of kids would work pretty well. Second, trying to row this big boat is tough. You will want a trolling motor for this boat. Third, at least in North Dakota, if you put a trolling motor on any boat, including inflatables, it needs to be registered with game and fish and you have to follow boating laws. (If you dont put a motor on it you shouldnt have to register it) Fourth, this is an air boat, it works extremely well on little to no current. I havent tried it in a river with a current yet but i dont think i want to. Overall im very pleased with this boat. It seems to be tough as the vinyl is thicker than an air mattress. The fishing pole holders seem cheap and in dont think id trust my poles using them. The boat is very portable but is pretty heavy. Much easier to load and unload with 2 people. Also this boat is rated for 1300 pounds people and equipment weight. I have at least 800 pounds in my boat at all times and it floats great and moves pretty good (5 mphish) with the trolling motor. Alright, if you are still reading here are my suggestions of what you should buy with the purchase of this boat. 1. Trolling motor mounting kit 2. Trolling motor (i used a minn kota endura max 40 thrust). The boat is only rated to 30 thrust or 1.5 hp (33lbs max motor weight according to the box) but im pretty confident you could fit a bigger motor on this if you wanted to. 3. Minn kota power center battery box. This box is great, it shows you battery life remaining and has spots for dc power so you can charge your phone and whatnot. 4. A 29 series deep cycle battery. I used an everstart maxx 29 from walmart 5. Minn kota portable battery charger. I like this charger because it has overcharge protection and is very lightweight and easy to use. 6. A 4 pack of life vests. I bought the orange cheapos but they work fine just to be legal 7. An air horn 8. An anchor. I think mine is 3 or 5 lbs. Trust me you want an anchor as the boat floats away easily when you are trying to stay still. 9. I bought a fire extinguisher. Not required by law but it makes me feel safer 10. Bow and stearn light (green/red for bow and white for back). I found a set for inflatables on amazon and they are AA battery powered. 11. An electric air pump. I bought a dc powered one so i can use the truck at the lake to power the pump and inflate the boat. 12. Industrial strength outdoor velcro. Stuff kind of flops around in the boat. Velcro keeps stuff organized 13. I would consider buying a couple large plastic bins to carry and store the boat 14. Loctite! The bolts holding the motor mount seem to loosen on their own. Using some loctite should help that 15. I am buying led light strips for my boat for better lighting at night 16. Buy dock bumpers if you plan on landing this at a dock. You dont want sharp metal or wood puncturing it

The product I received was defective and would not hold air. It kept losing air, which made it unusable and very frustrating. The item also appeared to have been used before. The repair patch package was already open when I received it, and the plastic packaging inside the box was also open. This made it look like someone else had returned the product before, and it was sent to me again without being properly checked or fixed. My experience with the seller was also very disappointing. They offered me only a partial refund, which I accepted because this is a heavy 50-pound boat and returning it would be very difficult after opening it. However, even after several days and several follow-ups, I still never received the refund. They kept saying it would be processed, but nothing happened. Overall, this was a very frustrating experience with both the product and the seller. Be careful when buying this. In my opinion, it is not worth the effort.

Awesome raft to take and get out on the water. Takes about 10 minutes to set up. Me and my buddy take it to lakes on the weekends and catch fish on it.

Bought this boat on sale on a whim. I'm happy I did. It's a ton of fun. Boat inflates in about 10 minutes in my experience but I'm also pretty strong so maybe a bit longer for smaller people. Once inflated it's light and easy to lift to the water. I loaded my family, wife and 2 small kids, in with no problem. I also tested the boat with my 6'4", 320lbs brother and no issue (I'm 300lbs myself). I would assume the listed weight limit is legit. The only issue with the boat is fishing from it isn't comfortable as it comes. It's like fishing on a balloon. Online there are tons of options for tweaking, like adding a wooden floor, that would allow you to sit on a chair and be able to properly fish. I'm buying a motor so I don't have to use the awful oars either. They're good in an emergency but using them is a mission. The loops they sit in aren't strong enough to really drive into and get the boat moving. The button clip on the oar also bangs against the loop and, if you drive hard, pops through. It's really not a good experience. Putting it away isn't a big deal. Boat deflates quickly. There are videos online that show better ways of deflating. They work. It's like folding up a sleeping bag. Once air is entirely out you just pop into a Rubbermaid container and go. The bag it comes in ripped on first use so it's trash. Get a proper container or stronger bag. It's lots of fun. Grab one and see. I'll post photos once I make my modifications for fishing!

Molto spazioso. Comodo in 5. Un po’ pesante da trasportare

The outer package was intact, the the intex company package was previously opened, looks like it is repacked , I am not sure the product is even original, product manual is missing

Resistente incluso en río de piedra. Muy buena calidad.

Idéal pour les sorties et loisirs en famille. Nous l'avons utilisé à la plage ainsi qu'en rivière. Il est très résistant. Résiste aux vagues. Avec les 2 pagaies incluse. Nous avons passer d'agréable moments avec ce bateau. De plus il est léger et facile d'utilisation.