CyberPower RB1290X2 UPS Replacement Battery Cartridge

The product is fine but MSRP from the manufacturer's website is much cheaper. The batteries come as 2 separate batteries, and on some models, you have to remove the old tape from the old batteries and put them on the new one. It is a pain. Luckily my models were separated in the units and easier to replace and install. They are OEM and seem to be working fine. The product arrived on time and was undamaged

First, I want to say that most people (like myself) are hesitant to try changing their batteries on their own because they are not sure what model of batteries to buy. Also because they think that they are be hard to replace. Well, let me tell you right now that finding out which batteries you need is very easy, and actually replacing them takes no longer than 15 minutes. For people that don't want to read, these replacement batteries is for the CP1500AVRLCD model. Make sure the replacement batteries you get matches the serial number rule below (found this from doing a simple Google Search): RB1290X2 (for serial numbers that begin with “CTH” or “CXE”) RB1280X2A (for serial numbers that begin with “CPT” or “CPA”) Read on below for a much more detailed explanation on what to do if you're feeling hesitant... Let me tell you how to find out what batteries you need. Go do a simple Google search of your system's model. To do this, simply type what you see on the front end of your CyberPower battery. In my case, as seen in the images, I looked up "CyberPower 1500VA AVR". After that, you will come to realize that there aren't much similar batteries they sell, so my model only have one product code (CP1500AVRLCD) so i became sure this was what i have. Now, make sure to take note of your serial number because you are gonna need it to really confirm if the batteries you are getting is correct (check above for more details on this). Once you are sure that these are the batteries you need, then unscrew two screws on the bottom of the system, slide the front panel down... and it should come off. Beware that there is a flat cable that you need to unplug from the front panel first before taking the whole panel out. This is what connects to the screen. After doing so, unscrew the two screws in the middle, and you should be able to unplug the wires, and just pull out the batteries. Unplugging may take a little effort/strength because in my case i really had to pull hard, don't worry.. you won't break them. PLEASE remember which wire goes to where. There are only three wires total, so there shouldn't be any explanation on what to plug where needed. It's very straightforward... One word of caution is that these are live batteries, so whatever you do, don't touch both of the parts where we connect the wires at the same time with metal. It will cause a spark and you'll definitely be scared. But, Its fine to touch them with you hands one by one to be on the safer side. Now, just plop the batteries back into the case (same way how they were initially or look again on my images above to make sure). Screw the middle bracket back, and plug the flat wire back onto the front panel. put the front panel back on and don't forget the two screws you took off initially... Then you're good to go! plug it in and turn it on! Enjoy your fresh batteries, and be proud you saved around $100 for not having to buy a new system entirely!

Just what I needed.

Fit perfect and directly replaced originals. No issues

I have had my CyberPower UPS for 7 years, and was long past due to replace the battery. Once I received this replacement set of two battery cells I found installation straightforward and all looks good. BUT, I had difficulty getting this product. First, it was tricky to find the proper replacement. CP has many different ones for their various UPSs. At first I simply googled for replacements for my UPS model number. This led to a variety of different part numbers, and it wasn't clear if they differed in a significant way. Finally I went on the CP site and chatted with their support people. They referred to their battery replacement tool. That needed the serial number of my UPS, which is hard to get at when the UPS is in use. Eventually I had the exact model number, and the CP web page giving this had links to suppliers. But then when I clicked through to those links every one of them (including Amazon) was out of stock. I checked back periodically. It took over two months before they showed up in stock on Amazon. So I quickly ordered. Everything went quickly after that. Note that there are generic alternatives to the CP branded batteries. But because of the possible confusion of what is a compatible battery I elected to play it safe and stick with a CP branded battery.

IMPORTANT TIP: Before ordering replacement batteries for CyberPower UPS units, be sure to check their website and search by SERIAL NUMBER (not by Model Number!) or you may get incompatible batteries. I have two UPS units with almost identical Model Numbers, but they use totally different batteries! That said, they work as intended if you get the correct ones.

Install was straight forward. Once they were installed I followed the instructions to make sure that the battery test completed with success. Battery capacity is back up to 100% and this stopped the occasional E02 error I was getting. I set a reminder to check the battery at 3 and 5 years going forward.

There has been much discussion about how to install. This depends on the model of your CyberPower unit. There are many many models. I have the LX1500GU model. For this model, I have attached the step by step directions. They are different from what has been posted to date. I did receive 2 separate RB 1290 batteries. As the enclosed directions state, the old batteries were in the UPS individually, connected without a separator. They were then removed one at a time and then replaced one at a time and reconnected. The overall process was very straight forward and very easy. I would highly recommend these batteries. Of course I was disappointed to learn that I needed to replace the original batteries at all, but glad it was so easy. Apparently, the change process can be more difficult, depending on the model that you have.

Follow directions and it installs just fine. Solved the "ups shutting off at random" problem - has been running for a couple of months without a glitch since I installed the new battery. BTW: Most UPS deaths are fixable just by changing the battery, not by throwing the whole thing into landfill!

Bought these batteries as replacements for my UPS LG1500. Easy to install and works very well. Did a few tests. Happy with my purchase.

Good price faster than local suppliers who don’t stock

My CyberPower LX1500GU seemed to have dead batteries, given the Self Test button in the CyberPower personal edition of the software caused everything to power off! Yet, batteries were listed as fully charged, etc. etc. when it was powered back up. After removing the old batteries, shaking them sounded like a maraca! Yes, I failed to test regularly and these were the original batteries. This time the Self Test button actually worked after replacing. It was also handy that these came charged! The only difficulty was one connector took a while to disconnect. I was worried about ruining the connector. and wire. But connecting the new batteries back up was easy.

When the battery went dead in backup unit and since installing these batteries the battery backup unit now actually functions better than it did.. They hold a charge Nicely and seems to last.. (Depending how much you have running off the battery) Very satasfied with it... Saved me from having to purchase a whole new unit...