ELUTENG PCIE SATA Expansion Card 2 Ports PCIE to SATA Card 6Gbps

Very good. Is working as intended. No problems at all. I really needed it for the sata ports due to most of the high end motherboards having only 4 sata ports. Installation is easy.

Got this adapter to upgrade my PC by adding a additional drive and it was easy to install, plug and play and worked great. Highly recommend it.

I'm getting ready to repurpose an HP T620 Plus thin client for use as a Home Assistant server. Instead of using the internal 16GB ssd I wanted to add a spare 120GB Sata drive that I have. I'm happy to say that after switching in the low profile bracket, it installed inside the T620 without issue. It's working great with my SSD now! Hard to beat for $12!

Works as advertised. However, bios did not recognize when plugged into X1 connector. Reddit user said same thing but switched to X16 connector and bios recognized so I tried same and it worked from that connector. No instructions from manufacturer to do that so other buyers should be aware.

Immediately functional in HexOS (based on TrueNAS).

I have a 10-yr. old PowerSpec {C, that only has 2 SATA connectors on the MB, and were both in use (1 HDD & 1 Optical Disc). I did have an open PCIE slot, so I bought this adapter, put it in the slot, bought a SATA cable, and connected it to my Samsung 870 EVO SATA SSD, installed in an open area (with an adapter). The BIOS couldn't see it, so I cloned my C: drive to it with Samsung's Data Migration tool, then unplugged the old HDD SATA cable, and plugged it into the SSD. That made the PC boot from the SSD, and install drivers. After shutting it down again, I plugged my old HDD into this adapter, in the PCIE slot. After2 more boots (to install drivers), everything works. The PC is faster now, and I have gained a lot of disc space. Good stuff!! I also have it and the HDD partitioned now, so I can keep my data on the SSD, too, and use the old HDD for off-line work and extra storage.

If you are looking for a bootable sata add in card, this is only bootable in csm mode. However, I was able to get around that limitation by booting into a flash drive running rEFInd, then using that to boot into windows. The price is very good and it got me up and running.

Bought this to hookup my built in DVD burner in my optiplex 3020 because the PC only came with three SATA ports. Can boot off of burnt DVD no problem.

Does the job, plug and play and no issues whatsoever with my 4 drives hooked up on it.

Works as expected. It does support booting windows from the controller - contrary to someone else’s experience. I got this as the onboard sata was acting funny in my very old system. Does not come with sata cables (power or data)