Brass Fountain Nozzle Pond Fountain Head – For 1.5 Inch Male Pipe – Female DN40 Inlet

Due to theft, we're having to replace our fountain heads. Tested this fountain nozzle and our HOA agrees that we will go with this spray pattern. The nozzle produces a nice flower design water spray that is at least 4 feet in height. When tested as a single nozzle, the spray height was at least 6 feet in height and sprayed outside our fountain wall. We will be purchasing a second one of these and spacing them out to produce a pleasing pattern. The top part of nozzle unscrews and can be plugged with a 3/4' threaded plug - this will produce a different pattern using only the lower holes. Overall, this unit does what it is designed to do and is well made and would be recommended.

Excelente producto

Great fountain head, description of diameter is not accurate, they likely meant radius. Is about an 8-9 foot diameter at 40 gallon/minute or 2400 g/hour water supply.

Installation: I purchased the 1.5” nozzle head and made a 1.5” pvc pipe stand that connected to one of the pipes coming from a 3 way split off of an Alpine 6550 gph pump. Pump was located midway from the bottom of a 5 ft deep koi pond. Pros: (1) Easy to find fittings . (2) Just the right spray size for the 20’ diameter end section of our pond. You may want to install a ballcock valve to control the water going through the fountain head . The amount of gph through the fountain nozzle will determine your size, diameter ,height, thickness volume, of the shape of the water spray. (3) Fountain openings did not clog in our pea green soup , startup pond where a small pladtic floating fountain totally clogged within minutes. We had to take the pond bag off and use only the Alpine 6550 installed plastic filter piece because the mesh pump bag clogged up with algae within 12 hours , our pond was so thick with floating algae. (4) Really created a lot of aeration . (5) We like the spray pattern. (6) Easy to screw on to PVC threaded pipe adaptor without leaking happening. (7) It was pretty easy to make an inexpensive attachment stand for our 5’ deep koi pond using materials easily found at Lowes. (8) The extra aeration plus filtration helped clear up our 10,000 gallon pea soup green pond. Cons: (1) It can be considered noisy by some people. (2) You cannot see the koi hiding underneath the umbrella of a splash pattern. This would probably be true of any substantial aeration bubbler also. The upside of this is that predators like birds and raccoons cannot easily see the fish either and most seem to prefer not to get splashed by the falling water. (3) If you have a small diameter pond, like less than 8’ or a pump less than 1000 gph, this 1.5” fountain head nozzle is probably too oversized for your needs. I would recommend this product and would buy again.

Good

Better than expected. Just want to watch out for how much water pressure you give it. You can have a 25 foot water fountain if you’re not careful.🤪. Came out beautiful and the customer loved it.

We have a one acre pond that we wanted to add a water feature to. This is so perfect and the sound is amazing! The spray is about 5ft high. Very happy with the purchase.

I am running this from a well pump that is rated for 230 ft. and the pump is only 30 ft. away from and it sprays about 5ft high.

Very Good service as usual, top notch product, good looking too. This product fitted directly to my Hozelock Cascade 1500l by simply screwing it onto the plastic outlet of my pump using a suitable brass reducer (the threads are both the same type and size). I found my pump was not really powerful enough, a more powerful pump would have improved the height of the fountain. I then decided to separate the brass fountain spray head and simply use the top section only which resulted in a very nice looking fountain spray roughly 1m in height that for me was just perfect.

Habe diese Springbrunnen Düse für meinen Schwimmteich auf einer starken Wasserpumpe installiert. Leider ist das Fontänenspiel nicht wie angegeben und gewünscht. Ich habe die Düse zurückgegeben.

Very nice. Good quality. Worth the price.

I had built ones in the past but this one worked better and far more cheaper and being brass should last a long time

This fountain spray nozzle has a very nice spray pattern, I added a PVC valve to control pump volume.