Small Precision Screwdriver Set for Electronics,22-in-1 Mini Screwdriver Set with 22 S2 Magnetic Screw Driver Bits and Extendable Handle,Multi-bit Tool Kit for Eyeglass Computer Laptop Watch

I had to remove a pocket clip on one of my knives & deconstruct another knife for cleaning & restoration. Being that my knife tool was still being “borrowed” by my neighbor (8 months & counting) & he was out of town, I went to pick up a screwdriver set with the propperly sized bits needed to get the job done at Ace Hardware. That was mistake number 1... The bit & all of its counterparts were made of a “metal” was so weak that should be pressed down to sheets & used to wrap food in. After feeding that set to the “helpful hardware guy” that recommended it to me, I went to my go-to hardware store, Amazon. Unfortunately I didn’t take the time to read the reviews on the set I was attracted to (it was shiny & neon green, so it captivated me in my full-on ADHD mode) & that it SAID the bits were hardened steel, I bought it. That was mistake number 2... Upon attempting to unscrew two tiny T-6 screws the bit crumbled within the first two twists in such a fashion that I actually laughed out loud! Typically in these situations I absolutely lose my (expletive), but being drained of energy & running on pilot mode, I found it funny that TWO SETS IN A ROW couldn’t loosen this tiny screw & not only failed at doing the one thing it was created to do, but also self-destructed while trying! Rather than making a third mistake & striking out, I actually read the details and reviews of many “precision screwdriver sets” that I wouldn’t have to take a loan out to purchase & this one had everything I was looking for: actual hardened steel (this set actually explained the hardening process!) & a rotating cap (something the first two did NOT have. I purchased it... Two days later it was at my home (gotta love Prime!) & upon opening it, I was SUPER impressed. It came in a nice case that stood up & displayed the bits in a way that you can easily find the bit you need. The actual “driver” is sturdily constructed, all metal & yes, it has a very impressive rotating cap that truly speeds up every job & allows much better control. Best of all, the bits are STILL as solid & perfect as they were before using AFTER completing the two knife jobs I had, four additional similar jobs on folding knives & two door handle replacements - the handle of the driver actually extends when you need it to be longer & if that’s not long enough, it has an extension bit too! This is a very high quality, easy to use precision screwdriver set that will easily last a lifetime or two. Please trust me when I say that you need not worry about it’s quality because it is made in China. I was so impressed with the quality of this set that I researched the company & found that the tool making company behind this product is a highly respected, quality tool making firm that prides themselves in leading the tool industry there. A high-end set for a very good price. I will not hesitate in buying their products - in fact, I’ll likely LOOK FOR their product the next time I need a tool!

This is a great set to have. It's the perfect combination of function over form and quality. Everything there serves a purpose and there's no unnecessary embellishments. Even so, they managed to make it look nice.. sexy even (Yeah I went there). One of the things that surprised me the most was the thought and care in the container itself. It's seamlessly smooth to select the appropriate bit, barely lifting up to release it from it's deceptively strong clasp. If you're using several bits in quick succession, you can leave them slightly raised up once removed from its clasp so it's easy to remember which ones you were using and change them out that much faster. The 'heel' if you will of the driver pivots laterally (spins) which allows you to keep your palm against it and not have to re-grip it entirely. There's a small piece of rubber along the shaft to aid in grip along with a fishnet cut-out of the shaft closer to the tip, again for grip. There's a fairly strong magnet to keep your bit in place. If you need an extra few inches, there's a little sliding cone you push up, pull your extension out, and it locks firmly in its extended position. It won't lock unless it's fully extended or retracted, so no in-between settings, but that's perfectly fine by me. The bits themselves I've been quite rough with frankly and they've taken the beating like a champ. The only bits I've noticed slight wear on so far is the smallest of the Phillips and flathead, however this I'm sure is entirely my fault as I've been using them to pry panels open shortly after removing the screws. It's a bad habit I need to stop before I damage the bits beyond hope. After you've finished your project or what-have-you, simply push in any raised bits that had been selected, close it up and be on your merry. Again I'll point out the container, flipping the top so it sits underneath was a clever space-saving idea which comes in handy for people like me with cluttered desks and shelves and lateral area is precious.. Can't afford to have half the case just being pointlessly obstructive. I understand I've been long-winded, my points wander around and I'm terrible with run-on ideas (or sentences), but this is hands-down one of my best purchases ever from Amazon. And just because I think no review is valid unless it points out some kind of flaw or defect, the only two bad things I can say about the product is this: the sliding coupling to extend or retract the bit is a bit sharp on the edge, just a little pain, a slight nuisance, but it's a subtle aggrevation I bear silently because it's a small price to pay for this precision tool made by Hephastus himself. And when the top is flipped under, the catch or clasp for the container just sits there useless, and God forbid if your workstation gets bumped or something and the container falls, the chances of damage to the clasp and hinges is much higher than if the clasp held the container in the open position. And one last thing this is a bit of constructive criticism I feel would be an easy and very cost-efficient way to improve the quality of future products. If, on the interior of the lid there was a thin strip of rubber or something similar so when you open the container and implement the new dual-use clasp to secure the container, there would then be some grip facing down on your work surface to keep it stable, if it needed to rest on slight angles or keep it from vibrating away.

I'm really impressed with this screwdriver set so far. I got it because I work on electronics with smaller philips screws as well as knives and other tools with torx screws. The set comes with everything I would need. I have only used it lightly so far but considering this is for small screws, I can't imagine using this for anything but minimal tension or torque. The bits seem well made and cut. Some of the tips aren't as perfectly cut as they could be but they all seem to be functional. What I really like about this set is the extension feature. There is a ring lever towards the top of the driver that when you pull it up, the driver can extend its reach by about 2-3 inches more. It helps solid and detracts just as easy and firmly. This extension makes this ideal for working in computers or small electronics. If I had to complain about anything right now it would be regarding the but labeling. Each but is marked but due to their small nature it can be very difficult to read which but you're trying to find. I think a guide could have been added to the case under each but to quickly and easily find what you're looking for. It is not a very big deal but it would have been a nicer feature. Everything so far has been great. It is a very functional set and the driver and bits all feel well made and sturdy. It cost a little more than some of the other sets offered on Amazon but I am pleasantly surprised with this screwdriver set and can recommend it.

This is for the 22 in 1 set: There are good reviews that cover the kit, the telescopic extendable handle and the tips. I haven’t put the tips through a hard workout - I assume they are not German quality but still serviceable. The case is nice but can’t be set in a position like one of the pictures shows it - you can swing the latch fully back (carefully) and it will lie flat - otherwise it would tilt down. I would have liked it to have an angle up when it is opened. The driver is great - has some heft and feels solid. There is a magnet, and it can lift another bit, but it does hold the small screws for the most part. Also, it is 4 mm standard precision bits - some reviews said it is not? I was able to swap bits from other sets. There is some play, but it is not debilitating. Overall, a nice small set that covers most of what the mortals among us might need and use. It is not for heavy-duty technicians, mostly because of the limited bits’ offering and probably the questionable durability of the bits. For me, it ranks well with the several other kits that I have (I don’t have the IFixit kit yet to compare) and had the case could hold an angle's position without a crutch of sort - for me, it would have been 5.

Quality is really good. Screwdriver has a very good hand grip and bits are durable and long enough to reach deep screws.

This tool has served me well since I first got it (in around late 2016). PROS: 1. Excellent quality steel attachments that fit on to the tool securely. My most used tips (the 0.8 pentagonal and the ph000) still feel good as new. 2. Good length on the attachments. 3. The tool itself is comfortable to use. The knob allows for better handling. 4. An extendable tip. To be honest (hehe) I did not know it was a thing for about 4 months. It was my cousin who noticed it first. I may have only used it once or twice after that but...meh... bonus stuff right? 5. The box itself has been great. The tip grippers/holders have not broken or lost their grip over time. The plastics they have used feel durable. CONS: 1. The only practical (or usability?) complaint I have is the lack of magnetism on the tips. They are just (and I really mean 'just') strong enough for really small screws like those found on mobile phones or even some laptops. But I have had a few frustrating times dropping a screw here and there after removing them. It would have been very useful to have that extra magnetic strength. Even though I mentioned a negative about the magnetism I choose not to detract a star because, despite the few times I had to reach for my magnetic pickup tool to fish out a screw from a tight spot, 90% of my time with this set has been very enjoyable. PS: The pictures I have uploaded are from 25 May 2018.

I like the quality. I like the case. I like the selection of tool bits. It is an elegant kit. The price point makes it a good value. I purchased a single kit for my own shop a couple of years ago, for a very specific task of driving #2 Fillister head machine screws of considerable length into delicate PEEK plastic threads. Cross threading is always a possibility. Cross threading destroys extremely high value added parts. I was looking for a sensitive driver. I was very pleased with how the tool fits my hand and makes the work optimally easier and more precise. I recently purchased 6 more kits, one for each of the 5 engineer/technicians working at my customer's shop. Everyone on the team got one for their own, including the boss. They were all pleased. It was a good morale booster for people who had put in a lot of hours all year long, getting finished product out the door, meeting deadlines, just a small token of appreciation and comradery in the work we do together. The last kit went to my wife, who makes jewelry in her shop here at our home. She also likes to tinker with appliances and small tools, break down and recycle dead appliance components. It was a lot like giving her a pleasing little piece of jewelry, but much more handy. The assorted driver bits can also be chucked up in our cordless electric screw drivers.

This is. Quality product. Bits are easily accessible and stay in the driver with no issues. They are precision fit to any screw. Multiple types of screw types as you use them it’s so easy to set them in their location hold and then drop them in place. I am so glad I chose this set even they had some negative I didn’t find anything wrong with them. The handle has an end that is free turning so you can apply pressure to keep the bit engaged while repositioning your fingers to make another turn of the screw. I truly love this set.

Je l'ai acheté un meilleur outil qui a la meilleure qualité et prix raisonnable, je vous suggère de l'acheterئje vous suggère de l'acheter

これでほぼ困ることは無いです。ケースも使いやすくて良いです。

I wanna say that the delivery was fast, the next day I received it, the delivery person takes a picture of the package being placed in mailbox and address to confirm that it was delivered, I liked that connection a lot. The package came in good condition, the product came in its carton box quiet solid feel to it, I open the box and the set of 22 precision tools and screwdriver are of a better quality that is depicted from the picture. I used the tools and the tools are solid and the screwdriver has a comfortable feel and easy to use. The only wish I have now since I like the set so much that they would sell a set of tools that would repair products like Iphones and products of that nature.

very good quality i liked 😀

Good quality, great built, lots of choices and god price. Very nice to use.