Dremel Lite 7760 N/10 4V Li-Ion Cordless Rotary Tool, Variable Speed Multi-Purpose Kit, USB Charging, Easy Accessory Changes - Perfect For Light-Duty DIY & Crafting, Sanding, Engraving and Polishing

I've had the Dremel Lite 7760 for some time now and conclude it is an excellent unit if used for it's intended purpose: Dremel advertise the 7760 as an entry level tool. I also have a mains powered Dremel 4300, which is the current top model from a versatility and power perspective. The 7760 will perform just as well as the 4300 for light jobs such as engraving, sanding, brushing or light grinding. But it doesn't have the power, duty cycle nor high speed of the 4300. They are intended for different applications. But the 7760 does some things the 4300 either cannot do, or it becomes awkward/time consuming to use. The 4300 or any mains power tool requires a cord and plugging into a wall socket or extension cord. The 7760 is lighter, shorter and can get into places that may be impossible for the 4300 or other long tool. Because the 7760 is battery operated, you can use it in the car, caravan, boat, attic or garden etc.; anywhere there is no mains power. The 7760 fits the hand much better than the 4300, when holding the tool like a pencil. It is shorter and lighter than the 4300, enabling holding the tool close to the cutting bit and enables greater control. While the 4300 can be gripped like a pencil, my hand becomes tired after 10min or so; while using the 7760 like a pencil is much easier to use and less fatiguing. The 7760 is battery powered and therefore cannot be operated as long as mains powered units--when the battery loses it charge the tool stops: Time to recharge. I did a couple of no load operating times for the 7760. By no load is meant the tool was turned on (just allowed to run free) and run until the batteries became flat of charge, and I timed the duration. Setting the switch on the lowest speed, it ran for 55mins. Recharge the batteries, set the switch to highest speed, and it ran for 30mins. Of-course, placing a load when using a tool entails shorter operating time, and the greater the load the shorter the running duration. So how long the tool will run varies directly with how hard you require it to work. If the tool is asked to work and it is being strained, a safety feature is engaged and the tool stops. Now turn the switch to off and then back on and it will run again. I tried pushing the friendship of the tool, and indeed it stopped. If you require a more powerful and longer running battery tool, perhaps you should look at Dremel's 8220. The 8220 is longer and much heavier than the 7760. I am doing electronic work as well as jobs around the house. If the job is light, such as wire brushing a rusty small tool, the 7760 will be quite adequate. It will be quite the thing for sharpening garden secateurs or sanding a small piece of wood prior to painting, engraving names on some tools, grind figures on a ceramic pot: All these and more are well within the capacity of the 7760. The battery is recharged using a USB connection which will supply 5volts at 1amp. Recharging time is 2hr 40mins. I tried using a bigger battery charger, and it still takes the 2hr 40mins, so there is no provision for fast charging. Many of the things I do are short in duration, and not requiring high power and the 7760 will be quite satisfactory. I showed the 7760 to a man who makes his living working on electronic equipment. Immediately, he saw its utility and I've ordered one for him.

I got this as a nail grinder for my many dogs and it is amazing!!! I was especially impressed with the quite operation, the speed controls, how easy it is to hold and comfortable, Id say zero vibration level. They are huge giant babies and I have had to take them for years to the groomer to get them done $20 per dog x 5 dogs, every month and that was still not soon enough, now I can trim them weekly and they dont mind a bit. Love all the accessories that came with it too and Im sure I will find many other uses for it around the home

Seems to work great so far. Very quiet. Specific speed settings not "variable" Low. Medium. Fast. Faster set speeds. USB charging is fast and handy

It’s a strong grinder and serves its uses. The only thing that’s an issue would be that the power switch would become loose. Which causes the grinder to not turn off completely sometimes. An example would be either needing to hold the switch down for a couple of seconds to get it to turn off completely (which isn’t a problem). But the problem lies at, since the power switch is loose, the grinder would just turn on automatically even when not using. Leading to the battery exhausting itself. I bought the Asurion 3 Year Protection plan with it. Just so you know, the protection plan only covers for just ONE replacement. I got a replacement but after maybe 3 months after, same power switch issue happened. So I had to buy a completely new one. Crossing my fingers that the issue doesn’t arise again.

Perfect tool for quick fixes around the house. Powerful with variable speeds gets jobs done. Being cordless, I can take this wherever I need to. It is a versatile, powerful addition to my tools. Ideal size.

Primarily use these for smoothing clay figures and as a nail grinder for my dogs. Pros- small, fast charging, variable speeds depending on your needs, comfortable design, lower noise level for scared dogs. Good price compared to dog branded grinders Cons- low battery life, accessories included are limited so you’ll need to get more. Overall good purchase, would recommend if your dogs are scared of the normal nail grinders as it’s a bit quieter and faster so reduces the amount of time they’re stressed. Nails come out smoother and less sharp compared to a clipper and less chance that you’ll get their quick, I have not had any issues with it and it hasn’t gotten to overheat

I wanted something lighter without a cord when I'm not using my Dremel 4000. This item is lighter and more maneuverable, but lacks the speed and power compared to the 4000. Still a good buy though. Be careful when buying a knock-off, stay with a Dremel.

A decent Dremel rechargeable set. Not a lot of accessories included, but that's not why you need this. You need a rechargeable, wireless solution and this is it. Variable speeds and USBC compatible charger is miles above what the old Dremel rechargeable used to be. Plus you've already got all the accessories you need, right?