Crystal Clear Epoxy Resin Kit 16oz, Bubble-Free, Anti-Yellowing, Self Leveling Easy Mix 1:1 Coating and Casting Resin for Table Top, Molds, Tumbler Crafts, Painting, Jewelry, DIY Gifts

This resin mixes easily at a 1:1 ratio. It is very forgiving for beginners and has a long working time of around 45 minutes. It's relatively bubble free when mixed but I still recommend using a vacuum chamber if you have one for intricate projects. And it's relatively low odor too which is nice. So far it's held up well in jewelry and cast projects. And you get a decent amount for the low cost. Way cheaper than most local hobby stores have it for.

Bought this to do some fiberglass work with and it’s a great product!! Easy to use, seals fantastic and cures fast for doing fiberglass work!! Quality resin and it doesn’t have that overwhelming odor!! Highly recommended

The bottle says the demold time is 4 hours, but when I demolded at four, it was extremely soft, like deforming under its own weight soft. However, demolding at 24 hours gives excellent results! Why not say to wait 24 hours?Despite the high demold time, it does have a really short work time. Be sure you have everything set to race to getting the resin in your molds once you combine the parts. After about 5 minutes, it gets so thick it's difficult to work with. By 10, you can forget it.However, once you ignore the instructions in the poorly translated booklet, this is a truly excellent resin. These dice, pressurized at 40psi, came out completely and totally clear.The short work time might cause problems if you don't have a pressure pot, though. Bubbles will get trapped as you stir like a mad man to beat the timer. If you're curious what mold I used in my example pour, it's from Druid Dice on Etsy.TL;DR, work time of 10 minutes, demold time of 24 hours pressurized, beautiful results.

This product is crystal clear, it is pretty slow setting, so the bubbles release well, I did have a ton of fish eye when put on thin with a paint brush over fiberglass resin with a polyurethane top coat, not sure if that was incompatible or if it was the high humidity but that part didn't work well but where I filled a cavity it worked perfectly, but if you have to do 2 pours do them 4 hrs apart and don't sand, if you wait till its cured and sand it it won't come out as clear. Update It filled the sanding scratches and is just as clear as the first method. Would be 5 star if it leveled a little better on flat surface, but that may be my fault🤷‍♂️

Love this for making jewelry. It’s easy to use the little bottles. It’s very easy to mix and use and it works well not a whole lot of bubbles so that’s a good thing.

I needed a quick solution as I usually use Total Boat. This is of poor quality, never cured, and never stuck to the wood. Also, I needed a quick solution, as I usually do with Total Boat. This is poor quality, never cured, and never stuck to the wood. It also would not sand and remained sticky. There is no way this could be used to create a "river table". In addition, when it felt dry on the surface, it was not dry throughout. Depth was 3 mm, letters in a sign. would not sand remained sticky. There is no way this could be used to create a "river table". In addition, when it felt dry on the surface, it was not dry throughout the pores. Depth was 3 mm, letters in a sign. This was for a gift, and let it dry for 4 days before scraping the project. Cost me twice in lost materials as this junk costs.

I used this clear resin to repair a refrigerator drawer on my camper. It was a part I could not source anywhere, and I had large pieces missing. I ended up being able to use clear plastic tape to create a backing for where the plastic was missing. I then mixed up this 2-part epoxy, and poured it into the "hole." The epoxy self leveled. I did see a few bubbles, so I took my heat gun and gently heated the epoxy. This eliminated them. Then I let the drawer cure overnight on my kitchen counter.So far, the repair has held despite being put to use in a high stress environment - inside a camper fridge that bears weight and has to withstand going down the road, bumps and all. Because the epoxy is clear, my repair is barely noticeable.I estimate this epoxy more than paid for itself, because I do not know how much a new drawer would have cost if I had would ever been able to find one.This epoxy got me out of a jam and saved me money.It's easy to use and I highly recommend.

It's O.K., for tiny/small hobbyist projects.I do not recommend it for large tabletop pours.Pay close attention to the lousy translation.Especially where it states to heat up the material to 176f degrees, or did they mis translate that!?!This product is Not “Fast Cure”.It is finicky for large areas like table tops. It tends to mottle if you are not careful as it is sensitive to the thickness you pour out on a large surface.Stick to U.S. producers for larger projects.

السعر مناسب

لأنه حلو

Für das ich absoluter Neuling bin was epoxidharz betrifft, hat alles auf Anhieb geklappt ! Tolles Ergebnis

Amazing resinvery happy

Easy to use , excellent results , good quality and price