Bostitch 6 Gallon 150 Psi Air Compressor

I had read some pretty good reviews on this one, and decided to order it. Having been looking around, I found that most 6-gal. pancake compressors were 1 - 1.5 HP. I couldn't find the horsepower rating on this one's advertising, specification list nor the manual. Finally I went to the company website and sent them an email asking what was the HP rating. The next day I received their reply and was disappointed to hear it was only 0.8 HP. So with that I decided to let its performance show its worth. It came two days later (fast!). After reading all instructions I turned it on, watching the time it took to reach its max (150) psi. I was surprised it took only less than 3 minutes! With hoses and a tire filler installed I waited a half hour and checked the pressure gage, and it had not shown any noticeable pressure loss. I topped off the tires of both my car and truck and then bled the pressure off. I then turned the unit around, over, upside-down and inspected it over-all for general quality; Weldment, materials, components and workmanship. Evidently it manages its power well enough to arrive and maintain its pressure rating, and seems sturdy and well made. Btw, I am a retired Quality Assurance Specialist for the U.S. Department of Defense. If I were to inspect this product for acceptance on a gov't contract, I would have no problem giving it my stamp and signature. Bottom line, a nice little compressor, especially at that (sale) price!

I've had this for a few months now. Bought it to use in my garage for small projects. Mostly only use a brad nailer and a small air spray gun. Painting with this is definitely only suggested on small projects. Being such a small tank, it burns through the air quickly and needs to refill often. Not really a problem per-se, but can get annoying on larger projects. - Fills quickly. - Retains PSI well over multiple days. - Noise is acceptable. It's an air compressor, it's not going to be quiet. I've seen some people complaining about the noise level. - has two ports so two people can use at same time. Very nice if using for something like a nail gun. Two people can be putting in trim at the same time. Overall great product for the price. My brother in law has the same one and has had it for years. No complaints from him either.

Good work

I did a loudness test at home with both the crafsman and bostich sitting on the floor and me holding the phone at the same height above each one. The bostich was slightly quieter but not enough to make a difference. It was only 2 db quieter. The good: - Bostich has a better storage option for placing the cord on top of the unit for storage. - very lightweight The bad: - The cord on the side of the unit that connects the bottom to the top gets extremely hot - not nearly as quiet as advertised - you might receive a unit in which the top peice isn't connected properly to the unit (see photos) -couplers might not be brass Overall I'll still give it 4 stars!

I have had the compressor for about 3 years now and have no problems with it. Use it for blowing out the shop and filling tires. Have used it for some lug nut removal as well. It struggled breaking them when taking off, but worked great for putting back on. I had an old impact wrench, so it might of been related to that, more then the compressor.

The Bostitch BTFP02012 6 Gallon Pancake Compressor has been a game-changer when it comes to tackling small tasks around the house. This handy little machine is not only convenient but also lightweight, making it a breeze to move around as needed. The convenience factor is a major plus. It's like having a reliable assistant for those DIY projects. Need to inflate some tires, drive in some nails, or power up pneumatic tools? This compressor has got you covered, and it's as easy as pie to use. The lightweight design is a real back-saver. No more lugging around heavy equipment. It's like having the power you need without the extra weight. I can carry it from room to room, and it's ready to go whenever I am. But don't be fooled by its size; this little guy is powerful. It's like the David that can take on Goliath. Whether I'm using it for airbrushing or running my nail gun, it delivers consistent and reliable performance. It's a workhorse in a compact package. In conclusion, the Bostitch BTFP02012 6 Gallon Pancake Compressor has made small tasks around the house a breeze. It's convenient, lightweight, and packs a punch. If you're looking for a compressor that's dependable and versatile, this one is a winner. It's like having a trusty sidekick for your DIY adventures, and it's become an essential tool for me. 🛠️💨🏡

I bought this compressor to replace a series of duds, including a "nice" oil-cooled 8-gallon one. My primary use is filling tires (cars, truck, tractor), and I've been using it for that for several months with excellent results. First, it's significantly quieter than any small electric compressor I've used. It sounds like it's running at a lower speed, so even better than just being quieter, it's less of a high-pitched scream and more of a lower-pitched, dull roar. I have no instrumental measurements to back this up, but it's noticeable and welcome. Second, and also welcome, the tank holds a charge. If the compressor kicks on and fills the tank while I'm topping off a tire, and then I turn it off and close the exit valve (counterclockwise, of course), I can come back a week later and the pressure in the tank is still where I left it, and unless a tire is fair empty, the 6-gallons is enough to top off a car tire with 10-15 pounds without even plugging in the Bostitch. Nice! Third, if you've used an oil-cooled compressor in cold weather (Great Lakes winter here), to have this machine just start up and run instantly in any weather is such a wonder. Damn oil-cooled compressors hate to start up properly in the winter, just when you need it for some plowing with the tractor that's been sitting for a few months since the autumn. This just works. Finally, I haven't used it with a nail gun or spray painting or anything like that, so I can't review that, but it's been a welcome new tool in the garage for everything else.

I have no real complaints, many compressors I've owned or currently own are loud. Do I wish it were quieter? Sure, but when you look at the price, the capability, and the reliability of the unit, it's more than a fair trade off. I use the compressor frequently, to supply air sprayers for stain or paint for projects, occassionally with a brad/finish nailer, but most freqently to fill vehicle tires; as the wife and I commute a lot, I do oil changes every few weeks with tire pressure checked and filled. This machine has had zero issues with any tasks I've thrown at it, and I've now had it for almost 2 years with regular useage, not a single failure. The only other minor complaint beyond the noise is it can "dance" a little if placed on certain smooth floors or inclines, but I'd imagine many pancakes could do the same. But I've done no maintenance and regular usage and it's never failed me, if it breaks I'd gladly purchase again.

El compresor se ajusta a la descripción del mismo, por tanto funciona muy bien. Sin embargo, es importante señalar que si la intención es operarlo en un lugar cerrado, debe considerarse usar protectores auditivos, pues sí es bastante ruidoso. Otro dato que no se especifica es el tiempo de carga a partir de cero, el cual suma tres minutos y siete segundos (3:07) hasta que se detiene automáticamente en 150 psi. En general, es liviano, estético y funcional.

منتج رائع ويستحق الطلب لكن يجب الاخذ في الحسبان الفولتج 110 لم يكن مناسب لما هو في بلدي 230 وهذا مهم لكي لايتلف بايدي عمال الصيانه جهلا بمواصفاته

I have used this unit for six months and I am very pleased with the performance. Well worth the investment. Powers my pneumatic tools nicely for auto work, and other applications. I have had smaller 1 and 2 gallon tanks and they are not worth your money. Purchase a decent one the first time.

I have used the compressor a couple of times and it works very well. Inflated a tire and ran one of my nailers, no problems. One improvement I would like to see is a wing or T on the bottom bleed valve. I tried to transfer the valve from another brand of compressor but the threads were not compatible.

Muy buen equipo, funciona muy bien aunque el ruido me parece un poco alto.