Husky Liners - Rear Wheel Well Guards | 2015-2020 Ford F-150 (Will not fit Raptor) - Black, 2 Pc. | 79121

I recently purchased the Husky Liners Rear Wheel Well Guards for my 2019 Ford F-150, and I am thoroughly impressed with the quality and functionality of this product. These wheel well guards are designed specifically for the 2015 - 2020 Ford F-150, and they fit perfectly, giving my truck a clean and polished look. Installation was a breeze, with the guards easily attaching to the rear wheel wells without any modifications or drilling. These guards' durable and rugged construction provides excellent protection for the vulnerable areas of my truck's wheel wells, shielding them from dirt, rocks, and other debris that can cause damage over time. What I appreciate most about these wheel well guards is that they serve a functional purpose and enhance the overall appearance of my F-150. The black textured finish complements the truck's design, making it look more rugged and ready for any adventure. Having used them for some time now, the Husky Liners Rear Wheel Well Guards have exceeded my expectations in terms of both performance and aesthetics. If you're a proud F-150 owner looking for a reliable and stylish way to protect your truck's wheel wells, I highly recommend trying these guards. They're a worthwhile investment for anyone seeking to keep their truck in top-notch condition while adding a touch of rugged sophistication.

Vehicle: 2018 F-150 with 6.5' Bed When it comes to accessories, I usually lean more toward OEM than aftermarket. In comparing the Rear Fender Well Liners, I wanted the Husky over the OEM because the Husky liners provided more coverage. In reading the reviews online, I did feel like I was taking somewhat of a gamble in going with the Husky liners. Overall, these fit perfectly and I am extremely pleased with the fender well liners. The packaging was sturdy and large and the liners came in without being bent, distorted or warped. The driver side liner was a quick and easy install, probably less than 5 minutes. The passenger side was more difficult but went in after maybe 10 minutes. Overall, I had to do a little bending to get the passenger side into position, but once it got up under the lip of each fender, the fit was 100% and the holes lined up with no issue. Not sure if those leaving negative feedback truly received a bad batch or if they simply didn't have them installed correctly causing the misalignment of the holes. Again, I had no issues and am glad I made the decision to go with these Husky Rear Fender Well Liners. As a disclaimer, before installation, I did trim the back side of the liners where the holes were drilled, as there was some left over plastic from where the holes were made which I felt could scratch the back side. A box cutter easily took care of this and besides this on thing, these were great right out the gate. They truly add a finished look to the truck and the Husky liners offer much more coverage than OEM. From my experience, if you are considering these, don't let the negative reviews push you away. Go ahead and get these liners!

Easy install, looks great, does what it’s intended to do, good fit.

I have a 2017 2.7 ecoboost regular cab, so this might be different depending on what you have. The upside was that I didn't even need the direction book, and I installed these in less than an hour just based on watching one of their many installation videos on YouTube. But the downside is that on the passenger side the holes didn't seem to line up like they did on the drivers side. I literally got the drivers side done in 10 minutes after using a little force to pop it in. On the drivers side once I got it in, you could see the holes from the clips with no issues. Passenger side was a whole different story. I don't know if it was because there's something under the frame different, or if it was the liner itself that was wrong. But once I popped it in, which took WAY more work than the drivers side, the clip holes were nowhere in sight. Come to find out I had to pull down a lot to find the holes, and I basically just had to force screwing it into place when I did. I do consider that a product defect, because it shows somewhere it's cut wrong. But with that said.. more upsides: *After I forced he screws in, I kicked it around and it's really a tight sturdy fit. *You don't even have to use the front and back clips/screws because it sits in there so tight. *i was on my knees a bit and my arms got dirty a bit from tires, which is nothing compared to the ford wheel liners that would have forced me to lay under the truck a bit. All in all I am happy about how it makes my truck look and I'm glad I bought it over the OEM Ford ones because you really don't have to get too messy with installation. (Also I noticed people uploaded pics that zoom in on the wheels too much, attached a nice pic that gives the full effect)

5 minute install on 2019 F150, all hardware included, fits seamlessly, material feels durable, extremely easy to install, covers all painted areas. Definitely a great buy, highly recommended. Also the cost is much cheaper than the OEM and the OEM doesn’t look as good.

Great item. Easy install. Made my truck look much better.

These Husky Wheel Well Liners installed very easily, took maybe 5 minutes per side to install. I allowed them to sit out in the sun for 20-30 minutes prior to the install, which made them more flexible from being hot, as they are a fairly thick and rigid plastic. There are many other reviews here that make these sound tough to install, but I experienced a smooth installation on my 2019 Lariat Special Edition with the 5.5' bed/box. When installing, be certain to have the liners on the correct side, as there is a left/driver & right/passenger side, they are not inter-changable between sides. The driver side was marked with a somewhat small randomly placed "D" and the passenger side the same, but marked with a "P". However, the "P" was stamped somewhat lightly and almost looked like a "D", as the bottom half of the "P" was faintly visable, almost appearing as a "D" at a quick glance. Once you've positively identified both of your sides, put on a pair of gloves and don't be afraid to flex and force the liner into place a little bit and it will be on location in just a minute. While it's not hard to install, you do need to apply a little force to get it precisely into place and to clear the wheel lip pushpins around the wheelwell opening. Align the two side holes and loosely secure the two screws into the provided J-clips, then move on to the front and rear holes, which should pretty much be lined up to the body mounting holes already. Secure both the front and back screws into their clips first, then come back to the two previously loosely installed side screws and finish securing them properly. That's it, it really couldn't be much easier for what it is. I will note, make sure you have a stubby phillips screwdriver on hand to secure the front screw on both sides, as the clearance between the liner and tire make a regular screwdriver a hard fit for that one screw on each side. These liners really improve the appearance of the truck instantly by blacking out all of the half primer / half paint color overspray area visable in the rear wheel well openings. Also, these Husky liners extend down past the body of the box/bed and cover the gap between the frame and bed/box, which the factory Ford version does not do, which was the reason I choose this brand. Very happy with the product.

I had mixed feelings about ordering these because of some of the reviews I read here on Amazon. However, I took a chance and got a set for my new 2018 F150 FX4 SuperCrew with a 5.6' bed. Upon removing these liners from the box, the quality isn't going to blow you away. However, I didn't buy them to look at, so if they installed correctly, then they'd keep the under side of the rear of the truck cleaner. I read the instructions and identified the proper liners for each side. While they look very similar, they are NOT the same. I found the DS stamping for Driver's Side and proceeded to install it. The liners attach with four screws, using clip on fasteners for the inboard mounting screws, and you use those clips as nuts for the front and rear attachment points. You do have to muscle these into place - they don't just drop in. However, it wasn't very difficult. I had the driver's side installed in about 15 minutes, and moved to the passenger side. When installing the passenger side, the inboard holes did not line up quite as well as the drivers side. The spacing is correct, but the fit of the liner made it a little more difficult to get those screws started. I had to push the liner towards the cab of the truck with a fair amount of force, and once I got the front screw started, the back was easy, I paired these with Husky mud guards all the way around and I couldn't be happier. I also like the fact these hide the painted areas in the wheel wells, giving the truck a slightly better aesthetic appearance. Going back and thinking about some of the negative reviews I read, I'm wondering if they didn't take notice that the liners are unique for each side. That may explain some of the negative reviews on these. Anyhow, my total install time was about 35 minutes and I did not have to modify the liners in any way.

Instalado en Ford f150 Platinum crew cab 2018 la figura y agujeros de montaje coinciden sin ningún contratiempo. El material se observa de muy buena calidad y resistente solo cuidado con las orillas pueden ser filosas yo obtuve una cortadita en un triz.

These Husky liners are 10 times better than factory, they fit perfect and offer better coverage inside the wheel well. Installed in about 15 minutes utilizing the factory holes. These lined up perfect and slipped in the well with ease. One thing I’d recommend is start from the rear and work your way forward. There is a lip on the rear that should go in first, but man oh man these are nice.

Le quedó a la perfección a mi Ford Lobo Platinum 2020, le da otro aspecto y además cuida los guardafangos de lodo y asfalto de la calle.

Very easy to install. Work well . I would highly recommend this to anyone thinking to put them on their truck.

Ideal para la Ford 150