NuFun Activities Printable Iron-on Heat Transfer Paper for T Shirts, Light Fabrics, 6 Sheets 8.5 x 11 inch, Long Lasting, Durable, Professional Quality, Easy DIY, Non-Toxic, Made in The USA

The media could not be loaded. It took a few tries to get it right with the temp of my iron and the amount of pressure and time. But I used one sure, and printed a bunch of small decals on one sheet so I didn’t waste. I just kept cutting them out and trying… the key with a regular iron is to keep the iron moving to apply steady heat since irons have holes. See video for finished product t

I run a print shop and ran out of my go-to JetPro-SS and needed to get more transfers quickly, so I ordered a bunch of different ones to compare, and the results were very eye opening! These were all pressed on canvas tote bags at 375 for 45 seconds with heavy pressure using a commercial heat press and doing a hot peel (peeled immediately after pressing). Nufun is the clear winner in all areas. The finished image quality is by far the cleanest of all the transfers, and the carrier sheet that you peel off had the least amount of ink on it, it was also the easiest to peel and was already lifting a bit after pressing. At almost half the cost and with the best results NuFun is the clear winner and is now my absolute preferred choice for this type of transfer, and you can bet moving forward I'm going to be checking if this company makes other products I use because there quality is incredible!Images show from left to right: PPD, NuFun, JetPro-SS*** UPDATE ***I was able to reduce my press time from 45 seconds (which was needed for JetPro-SS to actually transfer) to a mere 20 seconds, and the transfers are actually even clearer now. They still release smooth as butter and are less yellowed since they were under the heat for less time. Did 100 tote bags for a client and these transfers where absolutely flawless! Just placed another order for 2x 100-packs just to stock up a bit. LOVE THIS PRODUCT!!!!

It took me few times to get it right, but once I did my project turned out great! I laid the paper on and used a Teflon sheet over it. I used a heat press at 375 degrees for 25 seconds. Peeled paper off immediately while the shirt was still on the press and had no issues. I would highly suggest using a heat press! The print quality was good as long as your use a clear picture and the proper settings on your printer. I haven't washed them yet, but I am going to try that tonight. I had no issues once I played around with them for a bit.

Worked OK, just not as well as I thought it would. Used on a lighter blue T-shirt guess I should of tried the one for Dark Fabric. Iron has to be HOT, Press hard & Give it a second before you try to peel or you'll burn your fingers.It'll work since the place I ordered a "Custome" shirt for my husbands 50th Birthday suprise sent me a Large for the 3XL I ordered. LOL!🤦‍♀️🥺I'm gonna use the iron-ons, To make a pair of custome Swim Trunks for birthday boy. I'll post em if I can come back & "edit" my review... I have Faith those will turn out MUCH better as they're a light tan/ khaki . FINGERS CROSSED 🤞☺️

This was so fun. Worked great. I was so excited to wear an original with artwork from granddaughter

I bought a pack of 10 to start, pressed 10 shirts and it worked great so bought again to finish the rest and totally trash. Not only was the package delayed in shipping to me the quality after peel was horrid. I am going to try to lower my heat press setting and see if that helps but the transparent backing is definitely apparent and I am not really sure what is happening here. Will update after I play around but it is so sad because these are for my bach weekend and I can't afford to buy more shirts.

Didn’t like product quality

The media could not be loaded. The best transfer paper ever! Nonstick and so easy and simple to use you get so much product it’s absolutely worth every single penny!