Gelid Solutions GC-Extreme 3.5g with Tooling - Thermal Conductive Paste for Heatsink | um Thermal Conductivity | Easy Application | Not Corrosive.

I used GC extreme because it was recommend to me and I'm thankful that i did. I used to hit TJ-Max on both my CPU and GPU as soon as i started playing RDR2 on my laptop. (With AC on at 25/26 degrees) I finally changed it's stock thermal paste after 3 months of use. Even though i don't play much, my stock thermal paste was almost dried out on GPU and CPU. Pros- 1. Very reasonably priced. 2. Works flawlessly 3. Non-Conductive 4. Much much better than stock thermal paste or the generic thermal paste these companies apply to our laptop in the name of "service". 5. Heavy games like RDR2 are showing temps under 85 degree Celsius without undervolting/disabling turbo boost, which was not the case for me previously on the stock thermal paste. Idle temp was around 30-40. I'm personally very satisfied. (with AC on at around 26 degree Celsius) Neutral- 1. Bit difficult to apply but good thermal pastes are generally thick and they are not easy to apply. I have also not done it before so, Kinda new experience for me. Cons None as of day 1. Things to note- 1. This is a day one review. Will edit it in the future as the need arises. 2. If you want to have a rough idea about the temps (like really rough) use Hwinfo app and monitor idle/gaming temps. If you Want a better idea run Antutu, 3Dmark and other benchmark tests before and after applying this thermal paste. If someone is not willing to change the thermal paste themselves (which is fine) ask your laptop service guy to apply this thermal paste (buy it yourself), if the service guy is hesitant tell him that this is non-Conductive thermal paste (it won't damage the motherboard even if some of it spills on to the motherboard).

I had an HP omen 15 2021. Which started to heat after ig the stock paste ran out. Tried circling the service center multiple times used mx4, cryonaught. Literally nothing worked. For 4 months it was a pain until I applied Gelid and put an end to my misery. The paste works flawlessly and does the job well. Really I would recommend this paste to be for laptops. It's viscous enough to withstand the high temperatures. Mx4,cryo they work well but pump out quickly.

I have used may thermal paste over time like Thermal Grizzly Kryonaut, Noctua NT-H1, Coolermaster Cryofuze. This Product felt like the best value for money which actually out performs some of the above mentioned and performance is some what equal to kryonaut which is double the price now. The temperature of my laptop was quiet high when i used NT-H1 where CPU reached 97-99 C ( Even reached 100 C) and GPU reached 67 C under GPU and CPU stress test. Under CPU only stress test the temps were around 90-96 C. After using Gelid the temps dropped significantly to 86-89C on the CPU and 64 C on GPU. Under CPU only stress test the temps were very low 78-84 C. ROOM TEMP IS 29 C. My device is Hp Pavilion gaming 16. The problem with this device is it will only kicks the fan to the full speed when the temps reach high and no fan control. So first the temps reaches High enough to turn the fans to the max like it will reach 94 C then stays there for some time and when the fans finally run at full speed the temps some time even reach as low as 80 if the room is cooler for CPU only stress test.

This is great for laptops. It has high viscosity. And it comes in good quantity for the price compared to other options. Earlier i got my paste replaced at a repair center and they used cryofuze violet. Within three months my laptop was severely throttling and i saw many frame drops even after reducing quality settings. Read a lot of reviews and suggestions about high performance paste for laptops and how they are not suitable, about pump out effect, dry out etc. This has lower conductivity at around 7 while violet has over 12. However, that doesn't matter when the paste just spills over. This is much more viscous (and harder to apply and spread but manageable). After application I have noticed significant temperature drop in idle. Although my laptop still throttles under load, that's because of the bad cooling design of asus TUF a15 (2020).

It's best thermal paste I have tested and in this price it's the best thermal paste you can get. I tried on legion 5 pro I wasn't able to get ptm 7950 that's y and surprisingly with a cooling pad I didn't ran into thermal throttling issue easily on balance my laptop GPU goes around 75 in performance it goes around 84 and these are with cooling pad andon CPU it balance it goes around 85 and in performance it hit 101 but it's not surprising considering ryzen 5000 series have 105 Max temp limit and 101 it's the bracket set by amd and if I turn off the boost then CPU sticks to around 80-85 over all its best and i dont think I will pump out in a year you should go for it.

Ordered this on 4th Jan, received in two days. Thanks to superfast Amazon. This paste is a bit tricky to spread, but once you spread it evenly, it gets the job done. What makes it different than Kraunaut is that, it does not pump out (dry out at higher temps/). I repasted my laptop after 3 years and it reduced temps by atleast 15C. My laptop is ROG G531GT with i5. It does not thermal throttle anymore. You can close your eyes and go for this paste. While you are repasting, make sure to clean the fans as well! Dust is an enemy and proper dust removal means quiter and cooler performance.

I have just used this thermal paste on my Acer 5 laptop's cpu (i5 8th gen) and gpu (nvidia mx250). The laptop is almost 4 years old and never been repasted. I did not do a proper long running benchmark comparison, but I ran a quick MSI Kombustor and Geekbench 6 benchmark before and after repasting. Here is my result: MSI Kombustor - before: 377 (6 FPS), after: 421 (7 FPS) GeekBench 6 GPU- before: 9637, after: 10428 GeekBench 6 CPU (single/multi) - before: 572/1809, after: 611/2008 More importantly, the temperature rise was less dramatic after repasting. Previously the GPU temp shot up to 75 degree C immediately. Now it is taking about a minute to do so. Though not a big difference, there definitely is an improvement. I will update my rating after longer use.

The thermal paste is so good and easy to apply using the given attachment. I own asus tuf dash f15 in which after rma i was facing a huge performance drop like before I was getting 9k+ cb mc scores but after rma they messed up by applying very cheap thermal paste which caused it to thermal throttle and the scores came to only 6k mc cb r23. Before buying this company replaced the motherboard twice for this issue. Ultimately I tried my bet to apply gelid gc extreme by my own and it was bull's eye everything is under control nowonwards and the performance is back to normal.

Expérience avec GELID SOLUTIONS GC-Extreme 3.5g nouvelle version (paquet bleu) + backplate + vis sur processeur socket 1150 J'ai 2 supports ventilo avec attaches en plastique et je me suis aperçu que le contact n'était pas OK avec le cpu (mauvaise expérience aussi avec un vieux cpu AMD socket 939 grillé (car pas protection) à cause d'un support ventilo plastique fendu à cause de la chaleur et d'une position verticale), j'ai décidé de changer les vis plastiques par un backplate + des vis métal Avant : en idle 40-45 °C, en Full 100 °C Avec Gelid-Extrême nouveau modèle : en idle 27-35 °C, en Full 60°C Donc oui au niveau thermique, elle est super efficace. J'avais l'habitude d'étaler la pâte précédente car plus fluide, la Gelid-Extrême nouveau modèle est beaucoup plus épaisse : j'ai essayé de l'étaler avec ou sans l'applicateur mais le résultat est à peu près le même, après plusieurs tests, j'en mets beaucoup trop (d'autant plus que je peux serrer à fond le ventilo sur le proc) et je galère ensuite à l'enlever. Donc je suis revenu à la bonne vieille méthode, une boulette au milieu du proc. J'ai changé ma méthode d'étalage à cause de sa viscosité, du gaspillage engendré et de la fixation avec des vis métal, mais au final j'ai appris que mon proc pouvait monter à 100°C mais avec la Gelid-Extrême, il reste la plupart du temps à 60 °C. Bien sûr qu'une grosse partie du gain est dû au changement de fixation du ventilo mais les -15° à -18°C en idle prouve qu'elle est super efficace.

Llevo utilizando esta series de pasta térmica desde hace ya bastante tiempo, muy buena al aplicar se reparte muy bien, las temperaturas geniales, y la duración muy buena en equipos con oc muy alto duración de unos 8/10 meses perfectamente, y rindiendo igual. La aplicación es buena, decir que esta pasta es bastante densa, por lo que se necesitara un poco mas de paciencia que con otras. Aplicada con un i7 4790k a 4.7mhz y junto la refrigeración Kraken X62 tiene unas temperaturas en reposo de 22/24 grados y a full con OCCT de 58/62 grados con una temperatura ambiente de unos 20 grados. Espero que te sirva de ayuda mi opinión. Producto recomendado.

Ótima pasta térmica. Já estou anos com ela, sem necessidade de manutenção. Uso tanto para o processador quanto para a GPU. Recomendo!

Ürün olması gerektiği gibi beklentiyi karşılıyor.

Ottima pasta termica. Nel mondo oc la si conosce bene.