OverMolded Rubber Shotgun Stock and Forend for Mossberg 500 12 Gauge

Fits perfect good value

First, without reading the reviews here I probably would have not ordered the adapter nut and been in bind, but since I did I knew to measure the forend with the grip off and since mine was 6 3/4" long, I knew to order the adapter nut. I ordered this since my old forend cracked down the middle. Removing the old stock was easy, used a socket with an extension to remove the stock screw and channel lock players to remove the forend nut. Just reversed the process to install the new parts. Everything fit well, there are no gaps or overlaps, just looks like it was built that way. I took it out and shot three rounds of skeet and it handled as well as before. Going from low ready to the shoulder in a hurry is a bit more difficult due to the grabby nature of the stock material, but I usually call for the target with the gun mounted to my shoulder so it isn't a problem. The balance does not feel any different, and shooting doubles is actually easier since I don't grip the forend, I just rest it on my left hand and work the action with friction, and there is now more friction to work with. It took a little getting used to, and I can't say my scores have improved any due to the new stock, but I will keep practicing and hope to make a few 25's this year. All in all I am very happy with the stock and forend. I wasn't planning in purchasing this, but necessity dictated and I am very pleased with the results. I would be happy to recommend the Hogue Shotgun Stock and Forend kit. Just make sure you measure the forend before ordering, 6.75 inches requires the adapter nut.

This is a great upgrade over the stock Mossberg 500 stock and forend. Its a comfy, non slip grip and looks great. Installed on an old Mossberg 500A 12 gauge and fit on perfectly. Some 500's will need an adapter nut, I lucked out and did not. Thanks to other reviews on here, the length of my stock forend was same as this Hogue so no need of the adapter. These are pretty cheap to buy compared to other sets out there. Great value, and it feels great. I'm not a fan of pistol grips or folding stocks so this was exactly what I wanted. I have the Magpul stock and forend set on my Remington 870 12 guage and I like this set just as much, however this is not modular like that one, can't adjust it or add sling attachments. Great value, great set up, no complaints!

For want of a washer or two, it lost 1 star. Bought this for a Mossberg 500 tactical 8-shot to replace the nasty plastic forearm and, as an afterthought, the stock. Replaced the forearm beautifully (but, you'll also need a forearm slot tool to get it off and replace it, I bought this one https://www.amazon.com/gp/product/B0091EKBA0/ which worked perfectly). This replacement stock has a slightly better cushioned pad and grip. It also makes the pull around an inch shorter, and a bit more comfortable for an average sized guy like me, it wasn't bad before, but yes this is more comfortable. The stock bolt is an issue, if you had the original stock on it and are replacing it with this one and you use the original bolt and washers, before you put the pad on the new stock, very carefully check to be sure the gun is cleared (which you should have done before you started) and see if you can un-safe the gun and pull the trigger, if it doesn't exercise the firing pin, take the stock back off, add a couple not included washers, and put it back on and you're in business. Seller! A new bolt and at least a lock washer and 2 flat washers should come with this for that amount of money!

When I was 18 I purchased a Mossberg 500 and put a top folding ATI stock on it. I wanted a compromise between pistol grip and full stock. The old stock looked cool but was a little shorter than a standard stock, and when fired in pistol grip mode really beat your hand up. As I grew up a little I wanted a regular, full stock shotgun. Enter the Hogue overmolded stock. The kit came with a matching foregrip (added bonus, 7 years had not been kind to the original grip). Installation was a breeze if you are familiar with shotguns at all. One word of caution, if you have a pistol grip you will need a longer bolt to attach the stock. The stock and grip have a rubberized coating with a pattern to increase grip where your hands go. The stock also comes with a rubber end plate to reduce felt recoil. The stock performs amazingly, is a great length for me, and is incredibly comfortable.

This is perfect for my mossberg 500. I was new to shotguns when I bought mine,,, it had the 6 position adjustable stock w/ pistol grip which has its place and advantages amongst shotguns, but I dont think Mossberg should have made it an option on their guns due to the placement of the safety which is on top of the receiver. Using the stock that I bought it with made manipulating the safety cumbersome since I had to remove my grip to reach the safety. My fault completely, I should have done more research before my purchase. Anyway,,, this stock solves that problem quickly. Another upgrade is the recoil pad... WAY thicker than the one that came on the ATI stock. Havent fired it yet but I can pretty much forsee there being no more brusing after a trip to the range. Installing the buttstock was pretty easy. I took the advice of another reviewer and bought the bolt from Home Depot, cut it down from 6" to 5.5",,, used the provided washer and had no problems. Stock is snug as a bug. I guess I got lucky with the forend. I read that with newer Mossy's the slide tube was shorter and didnt match requiring an adittional part from houge. Not the case with mine. I used a pair of channel locks with a couple peices of duct tape to remove the forend nut... forend slid on, tightened the nut until it was snug and gave it an additional 1/4 turn and it seems to function as if it were stock. Extrememly happy with this kit and would recommend it to anyone looking to upgrade, or anyone with a pistol grip / adjustable stock that has problems effectively manipulating the safety.

It advertises that it fits onto a mossberg maverick 88 but the grip does not fit at all and the stock doesn’t include the required screw in order to install. My maverick 88 had a stockless pistol grip meaning the screw I already had was too short to use on the stock. To my surprise the stock does not include the $3 screw that is entirely necessary in order to use his product. It’s pretty safe to assume that someone buying a stock for their shotgun might be doing so because they don’t have a stock in the first place.

I recently purchased this stock to replace my pistol grip. It installed without a hitch. I took it to a gunsmith to replace the forend since I didn't have the wrench to take it off, but that was only $10 for him to do it. If replacing a pistol grip, make sure to find a new stock bolt, as this one requires a much longer one than the pistol grip. Give Mossberg customer service a call at (800) 363-3555 and they'll send you one, FREE :) As for the quality of the product, well, it's a Hogue. The rubberized grips feel fantastic; you will have no problem what so ever pulling the slide back in any condition. The butt pad is probably my favorite part of this weapon. It is far superior to any I've used in the past. I can go through several hundred rounds in an afternoon and not have a bruise.

Its a great buttstock for the mosssberg. Has a lot of padding. Amd the foregrip feels great in the hand. Would definitely recommend this product. But if you dont have the original stock for the gun you need a 5/16 bolt by 5 inches long but thats not hard to come by. Its real easy to install and from start tp finish it took and hour.

Good set, fitted onto my old 500 perfectly, very comfortable for a big man

I opted for this stock to replace the original, beat up wood furniture on my older Lakefield Mossberg 500A. The fore end was a perfect size and fit, but the butt stock required some fine tuning. It would not marry up tightly to the back of the receiver without trimming the depth and thickness of the C-shaped “key” structure on the stock. But, after a bit of re-shaping with a rotary tool, I was able to achieve a perfect fit. It’s not as nice in appearance as more expensive options, but it’s comfortable, functional and durable and that’s what really matters. It’s a quality stock at this price point and would have received 5 stars if not for the fitment issue.

As described excellent product, pleased, would recommend, excellent grip and makes your shot gun lighter, thanks for your good service and delivery on time!

Great classic stock with none of that pistol grip business. Pistol grips dont work well with a mossberg tang safety. You will need a standard 5.5 inch 5/16 bolt if you are switching from a pistol grip or dont have the long stock bolt. The rubberized texture helps and is in the right places.