Question 1

Shouldn’t this be a .022 capacitor?

Accepted Answer

The. 022 & .047 are both used. The. 047 wil give you more mid tones while the .022 still give you brighter tones. Seymour Duncan prefers the .047

Question 2

Is it easy to install?

Accepted Answer

First let me say that the parts are high quality and the pots are full size.  Check your body to make sure the pots will fit in the cavity when mounted on the pickguard.  Some routing out of the cavity may be required, this is especially true on most import strat style guitars which use mini pots. The schematic is detailed and you have the option to use vintage (cloth covered) or modern (plastic coasted) wiring. All wire is included and it's plenty long enough.  At this point I can't remember if the schematic for the treble bleed was included (I did install mine), but you can find that easily on the internet - the cap and resistor for it are included. That said you must have good soldering skills and a decent soldering iron.  If you don't then please do yourself a favor and have it soldered up by a skilled person.  Otherwise you run the risk of burning up your components with too high temp or not getting a good connection with a cold solder joint.  I mounted everything in my pickguard before I started to keep good reference.  Also make sure you have shielding foil installed on the underside of your pickguard before you mount your controls, otherwise you aren't going to be happy with the cutouts and static of ungrounded/unshielded controls. It took about 30 minutes to solder the connections.  It works great!

Question 3

Will this work with a rear-routed Stratocaster? Are the pot shafts long enough to go through the body instead of pickguard?

Accepted Answer

I can't directly answer this. The pot shafts worked fine for my pickguard. How thick is the wood from the inside surface where the pot faces into (on the front side) to the exterior (front) of the body? If it's under 1/4 inch, you're probably fine. If it's over 1/4 inch, I'd be leery, but it still may be worth checking. 3/8th inch, and I'd say probably not.

Its a good kit—high quality parts, and the blender mod is very cool.

Question 4

What values are used for the cap and resistor in the treble bleed circuit?

Accepted Answer

680pF capacitor, 220k resistor.

Thanks!

Asin	B00ZO7ANJM
Best Sellers Rank	#19,917 in Musical Instruments (See Top 100 in Musical Instruments) #261 in Electric Guitar Hardware
Brand Name	ToneShaper
Color	Orange
Connector Type	1/4" Mono
Customer Reviews	4.7 4.7 out of 5 stars (335) 4.7 out of 5 stars
Guitar Pickup Configuration	S-S-S
Included Components	Capacitor, .047µF Orange Drop, Jack, Switchcraft 1/4" Mono, Pot, CTS 250k Audio, Low Torque (1/4" Bushing Length), Pot, CTS Blender, Low Torque (1/4" Bushing Length), Screw for Shielding Ground Lug, Shielding Ground Lug, Switch, 5-Way, CRL, Treble Bleed Kit for Single-Coils, Wire, 22 AWG Cotton Push Back w/ Tinned Overcoat, Black, Wire, 22 AWG Cotton Push Back w/ Tinned Overcoat, White, Wire, 22 AWG Stranded Silver-Plated Copper, Black PTFE, Wire, 22 AWG Stranded Silver-Plated Copper, White PTFE, Professional, Fully-Illustrated Wiring Diagram
Instrument	guitar
Instrument Size	1 Pack
Item Weight	0.13 kg
Manufacturer	Tone Shapers
Manufacturer Part Number	TS-WK-ST-SSS1
Model Name	ToneShaper Wiring Kit, Stratocaster, Blender (SSS1)
Model Number	Ton-2154
Number Of Items	1
Number Of Packs	1
Set Name	Fender Stratocaster Wiring Kit
Unit Count	1 Count
Upc	852606002403

ToneShaper Guitar Wiring Kit, for Fender Stratocaster, SSS1 (Blender Wiring)

Details

Details

Description

Specifications

Common Questions