NewYall 7.3 inch Navigation Touch Screen Glass Digitizer

I am very happy with the results of this project. My screen still displayed, but was unresponsive to any touch. The only problem I ran into was placement of the screen. The original hangs slightly over the bottom portion, and I made it even the first time. Had to take it all a part again to correct. Cable is slightly different, but works fine. I believe it came with protective plastic on both sides. If it isn't as good as the original, I haven't noticed. For the double sided tape, I just used some Scotch Permanent Double Side Tape that I had laying around. Take many pictures before tearing it all apart for reference. Lastly, really take your time and be careful with the heat gun to remove the screen. I still broke the old one removing it, but who cares, it was already broken.

Worked Fantastic on Prius 2009 Gen 2. For some reason Amazon automatically shows it does not fir Prius Gen 2, but it sure does. Touchpad started working just fine.

Like a customer who posted a review concerning item not working for their 2006 Prius days after I purchased this, this digitizer did not fix touch screen problem in my 2007 Prius. Interesting that we both had same problem with digitizers that may have shipped days apart not working in 2nd Gen Prius. I used YouTube installation videos and 2 mm double sided tape suggested by others here. As others have noted expect no instructions and no adhesive with this product.

I’d give it 5/5 if it wasn’t for a few things that could make the purchase a little more inclusive and better fitting. Some B7000 adhesive, removal tool and if the zif flex was aligned a little closer to OE spec. You’ll see people talking about double sided tape. I urge you to ignore it. Simply dab B7000 or E6000 in the corners and in middle and it’ll setup within 5 minute and full cure in 24 hours. Also make sure to remove the previous display with some sort of flat or easily maneuverable razor on the edges of the screen. Heating the adhesive with a heat gun on the edges helps. The zif flex does work but the termination on it is different than OE. Look it works and seemingly works well.

I bought this for my 2008 Lexus GS350. The plug looks a little different but it is the same 4-prong size. It fits and works fine. I had to find a place to switch the old one out for this one, and it took a few hours and cost $350, but that was the cheapest repair I could find. Anyway, it does fit and works fine.

The screen is relatively easy to install if you're somewhat handy with small tools and electronics. I took out the old unit, swapped the screen and re-installed it in about an hour and has worked perfectly since. When you look at the cost of an entirely new unit, replacing the screen is the way to go. It is absolutely worth the money.

Not clear in day light

my 2007 lexus is350 touch screen died and i bought this and watch youtube on how to replace it. it took me 2 hr to replace it. it is not as clear as the oem but works just as good. time will tell how long it will last. so far so good. cheap and works.