64135 UltraEdge Detachable Blade, Size 3-3/4FC, 1/2in Cut, Chrome | Carbon steel for long-lasting sharpness, fits AGC, BDC, BGC, BGR, DBLC, MBG & SMC dog clippers

This Andis Ultraedge size 3 3/4 carbon-edged blade Leaves hair 1/2". Yes, I use it on my husband, and it is awesome. I have no idea why anyone would worry about using it on people if they will use it on their pets, but it is great. Makes cutting his hair so much faster.The blade does a lovely cut, no split ends, and it does an excellent job of keeping the hair length even. He likes a kind of "undercut" but not one that is so close the head, so this half-inch distance is perfect. Because it is so easy to use, I can do a five minute touch up any time he wants, instead of cutting it shorter than he wants so it lasts longer, because it takes so long to do it all with scissors.Easy to control, does require working in different directions (moving up the side, moving across) in order to catch all the hairs, and that takes just a bit of practice, but it is easier than I expected. The blade is shaped to be comfortable even used against the skull (rather than the soft parts of a dog).I've tried various plastic clip on trimmer combs, and they are pretty much useless. This works entirely differently than those.Worth it for making it easier to give my husband a trim. Time saved also makes it worth every penny.

Fear kept me from getting the 3-¾ FC blade. I have an Andis two speed clipper, ProClip Super 2-Speed Detachable Blade Clipper, Professional Animal Grooming, AGC2 (22360) which came with the size 10 blade that I never use. Instead, I purchased a size 40 blade and two sets of snap-on combs, both large and small sizes.I think that I misjudged how close this blade would come to my Bichon Frise’s skin, based upon the angles of the size 10 and the size 40. Since I am an amateur groomer, my first concern has always been not to cause any injury to my dog. I always envied the plush look that some people were able to give a Bichon’s coat and I was never able to achieve that look with the comb attachments or my inept scissoring.I finally decided to purchase this blade and, to my surprise, it is completely different than the ones that I have been using. The angle is very close to the ½” comb attachment, so I felt comfortable using it. Since this is a finishing blade and I did not purchase the skip tooth blade, I first cut the hair with my usual 40 inch blade and ½” comb. I then went over it with this 3-3/4FC blade. Wow, the difference really made me regret that I didn’t purchase this blade years ago.My Bichon’s hair is so even and plush, even along the sides where I usually have trouble blending the lengths. I am so enthusiastic about this particular blade and recommend it to anyone else on the fence about using a blade without comb attachments.

This was just the length I wanted for my standard poodle for the winter. It cut nicely (on washed, dried fur) and left enough coat on him to keep him from matting but long enough for warmth. If I keep this length on him long-term it will save me agonizing hours of grooming. When his coat gets too long it takes 4-5 hours to wash/dry and brush before I shave him. This is the perfect middle ground for maintenance.

Excelente

Bought two sets of clippers before this and they were ok for alittle while but after a few uses just didn't do the job anymore. I have 2 dogs that need clipping one is a big Cocker Spaniel and she has really thick curly hair the other clippers just would not go through that hair. These do a really nice job. I bought an extra blade to cut my little Yorkies hair a little longer, and the normal blade for clipping a close cut on the cocker. I gave it a 4 star because they do get alittle hot when your doing a big job but the cooling spray helps. You just have to keep an eye on that as to not make the dogs uncomfortable while using them. Would recomend these clipper---don't waste your money on the cheaper ones.

I looker forever for this. I am a retired hairdresser and nobody sells these anymore. They are the best blades, durable, easy to use, the cost is in line with beauty supply or barber supplies. I have used the item since 1984, there are none better.

I groom my Standard Poodle and I thought I could make do with the plastic snap-on combs instead of buying this blade. Why did I wait? I just used it today for the first time and it's worth buying!I tend to wait longer than I should between grooming because it's either an all-day event to bathe and groom my Poodle, or I pay a hundred bucks to have someone else do it. So by the time I get around to grooming, his hair is pretty long. I used to put a snap-on comb onto my clipper and take off as much hair as I could before the bath (why wash and dry all that hair I'm just going to cut off anyway, right?) But the plastic combs get caught up in the curly Poodle hair, or they fall off and I take a bigger chunk of hair than I had intended, or the comb gets all clogged up with hair and I have to take it off and clean it several times.Today I took off a wastebasket full of hair with this blade before the bath , then bathed and blow-dried the dog, then clipped his coat again with this blade to even it up and finish the groom. It worked great!I thought I'd have the problem of the blade not cutting the dog's hair, as other reviewers have mentioned, but once I made sure the blade was flat against the dogs skin, it cut just fine. It's also much easier to clip a dog when the coat has been blow-dried - I bought a "blaster" dog dryer (the Double K Challenge Air 2 speed) many years ago and it was definitely a good investment - it gets the curly Poodle hair nice and straight so I can clip and scissor his coat and make him look as nice as a professional groomer!I mentioned that I clip the dog before I bathe him - I have been told this is not good for the blades because the dirt in the coat will dull the blade, but I still do it anyway, first of all because I groom about 6 times a year, so the blades aren't doing a lot of cutting, and I haven't noticed they dull any faster than the blades I don't use on a dirty coat, and also because I don't mind sending my blades out to be sharpened.

Andis quality sure isn't what it used to be!Not as sharpe, not as long lasting, and not a good value however a necessary evil when grooming a giant long haired bouvier des flandres. The #7 skip tooth came broken. Unfortunately I didn't send it back.

Lama non originale ma imitazione dell'originale... non taglia e si vede che non è andis .

من 2 استخدام بدات تعلق ماتشيل الشعر 💔

Product as described

I cut a few dogs for money not many but these and is blades are amazing.I’ve got both the 9.5 mm and the 13 mm and haven’t had a single issue with them blades still super sharp cutting through dogs coats like butter

The Andis Carbon-Infused Steel UltraEdge blades have become an essential tool in my pet grooming routine, offering a level of precision and durability that sets them apart in the world of pet care.Crafted with carbon-infused steel, these blades are not only exceptionally sharp but also resilient, withstanding the demands of regular grooming. The cutting efficiency ensures a smooth and professional finish, whether trimming fur or creating intricate pet hairstyles.Compatibility with various Andis clippers adds to the versatility of the UltraEdge blades, making them suitable for a range of grooming needs. The easy snap-on design simplifies blade changes, saving time and ensuring a seamless grooming experience.As a pet owner who values quality and efficiency in grooming tools, the Andis Carbon-Infused Steel UltraEdge blades have exceeded my expectations. They're a reliable choice for achieving precise and polished results, making pet grooming a breeze.