BestOffice Ergonomic Office Chair Desk Chair Computer Chair with Lumbar Support Arms Executive Rolling Swivel PU Leather Task Chair for Women Adults, Black

Computer Chair on Amazon I Reviewed I am 82 years old, and this is the BEST computer chair I have ever owned! The previous chair was a "bully-type" that kept pushing my back forward causing me no end of discomfort and constantly trying to make adjustments. Before purchasing this new chair, I read all the comments and realized that almost all negative ones were written years ago. What I wanted the most was a chair that was rock able (which I hoped would not fight my back). I am so happy with this new chair! It goes low enough for my 5' 4" body and the so comfortable rocking is amazingly wonderful. The rocking deserves 5+ stars. The armchair fabric appears stronger than the seat and back, but I may be wrong. From experience with other computer chairs which seemed covered in thinnish Vinal-type material (similar in feel as this chair) I bought it knowing I need to check it for spots of nicking or wear and tear. If any appear I will purchase the strongest mending tape I can find, in order to keep it in nice looking shape. I bought the black chair just in case. Assembly was pretty easy following the YouTube video. The only problem we had was in screwing the arms into the seat and back. TIP: Before trying to screw the bolds in the seat and back, look closely at the holes in both seat and back and clear away any blocking foam or fabric that blocks the bolts from entering cleanly. I used tweezers mostly, but I did use scissors on a couple of the holes. I found that it was best if I pushed the foam and fabric down around the bolt receptacle with my fingers before screwing in the bolt. I don't fault the manufacturer because I don't know how to prevent this problem. If the manufacturer would consider adding a suggestion in the instructions to check and clear any stuck-on foam backing or material on the female bolt receptacle and carefully removing it, I know I would have been most appreciative. The only negative thing I have against the chair is the lumbar support that hits my back in an uncomfortable place. I plan on buying a nice thick wheelchair pad to put me higher on the chair, and placing a small pillow in the space below the bar and seat cushion. This complaint is something that I can take care of myself and I realize that we have our different height and weight and for the most part nothing would stop me from buying this chair again. I love this chair. Mrs. LSCF p.s. This chair was $84.00 and the arms are stationary

Let me start by saying that I'm the some-assembly-required person everyone in the family goes to around the gift giving holidays. Can't put it together, give it to me. Now that I've said that, let me also say that this was a bitch to put together. Not at first, but at the end. The last bolt. People on here have said that it didn't line up for them, but mine lined up just fine. Mind, you have to keep the bolts loose on one end (the metal base attaching to the chair) so the other end lines up. Don't tighten one after another immediately, only after you've got all 4 bolts in and slightly secured, then tighten them down. I had this problem on the last bolt in the arm rest attaching to the back of the chair. It was lined up, but apparently not enough. I had to lay this on it's side and grapple with lining it up perfectly, then applied pressure and got the bolt in. I now hate Allen wrenches. Now onto the chair itself. It doesn't say anywhere on the product page that this sucker can lean back! I've always loved those kind of chairs and didn't know this one did it, until I sat down to find I could rock back and forth. YES!! That was a nice find. The chair is very comfortable for me as I am a book cover artist and am constantly at my desk. The bit of chair in the small of my back is great and the chair back is tall. It's damn near the top of my head. I'm 5'7 nearly 5'8" and my feet dangle just slightly when it's at its full height. I have a tall desk, so it's great for that! The chair is heavy, once fully assembled. And I won't lie that some reviews are right and that it does smell slightly of gasoline at first, but I got rid of that with some Febreze extra strength that I had around. Overall it's a great chair, despite being surprised at how much the shipping was, it was worth it. We'll see if I continue to say that after a few months.

So far so good. I have had the same computer chair for probably.... 10-12 years. It has served me well, but it has finally started to show its signs of wear. It was hard for me to find a computer chair without a review saying "Padding wore out in 2 days!" or "Chair broke when I sat in it the first time!". So I finally pulled the trigger on this one for $89.00. Shipping was super fast, I received the chair 6 days before the earliest possible date. Box had a few dings, but its a big box thats to be expected. The chair was easy to put together. I don't understand these reviews thinking you need PhD to put this thing together. I put it together by myself in under 10 minutes. The key to this is, don't crank down on the first screw you put in. Put all the screws in and hand tighten them, then like changing a car tire, go to each screw and tighten it just a little doing opposite corners. Pop the chair on to the base, then the back pivots down (already has 2 screws in it from the manufacturer), and you can put the bottom 2 screws in. Holes lined up perfectly, but just like the base tighten each side in equal increments. Don't tighten one side all the way or I can see where it would cause a problem in the other side fitting. Now this is where it gets 4 stars from me. The top 2 screws that hold the back of the chair to the armrests, that were already in it from the manufacturer, move when you lean back in the chair, just a bit... but its enough to notice. Okay no big deal... just tighten those up a hair.... EXCEPT the Alan wrench they sent you IS TOO SMALL for the screws. They used different screws for the top than the ones you install yourself. So I have to wait until I head to our shop in the morning and get a bigger Alan wrench to tighten them up. Small inconvenience for me, could be big for someone else. I don't understand why they couldn't use the same size screws. Comfort is very nice, its firm but not like sitting on a brick. The back has good padding and good lumbar for me. The seat so far feels very nice, and the arm rests have a good amount of padding in them. I'm 5'7 150 lbs and my feet sit flat on the ground at the lowest setting. The chair does sit a bit higher than my old one, and will take a bit of adjusting when playing games. Since there are no dimensions, I figured I'd list a few since this is a problem I ran into, maybe it will help someone else. Floor to Seat - 19" Floor to Arm rest (highest in middle) - 27" Seat to Top of Headrest - 28.5" Armrest to Armrest (inside) - 20" I would recommend this chair so far!

After reading many of the reviews on Amazon and a few others, I decided to make the purchase. It's a little higher than I would normally spend on a chair, but having a bad back, comfort comes first. Upon receiving the chair, I decided to see exactly how long would it take to put the chair together and if I needed some assistance from the Mrs. Installation was a breeze, as it only took me roughly 12 minutes to put it all together. The instructions are a bit vague, as it doesn't clearly show, on the instructions, exactly how it's supposed to go. However, you'll notice that they've placed a 'Front ->' sticker on the mechanical part & bottom of the chair. This will help you align everything up. I noticed that some folks were stating that it was hard aligning the holes up. I didn't have that issue. My suggestion is to start by getting one screw in, then go diagonally across the mechanical frame, and place a screw into there. Repeat this process for the other 2 holes, and tighten them up in that same order. However, noting that, only tighten the screw, at first, until it's snug onto the chair frame. Then, once all 4 screws are snug, tighten them completely, in the same order you started them. Doing it this way, I had 0 issues with getting the mechanical frame attached to the chair. That should allevate that issue/concern. The other complaint I saw is there are 2 screws that need to be attached to the chair frame & arm rests. This one was a little bit tricky, as those wouldn't align properly for me. However, I used my free hand (Non-tightening hand) & my knee to help align the holes. This was done by, with my free hand, pulling back on the top of chair (The head rest), and pushing the bottom part of back rest with my knee into the seat. By doing this, I had more control over where the holes were, and I was easily able to get it screwed in, while even placing the screw covers perfectly into the screw holes. Once the chair is completely setup and I sat in it for the first, with someone dealing with back pain, this is one of, if not, the most comfortable chair I've ever sat on. It can even get low enough to the ground that my 5 year old daughter can get herself on it, without any issues. I'm 6'0", so the high back is a huge benefit, and once I sit down on it, I can easily tell that this is a good quality chair. Granted, I'm not going to claim that it's the top of the line, but for the price & the comfortable level, you can't go wrong with this chair, especially since setup is less than 20 minutes.

Visually the chair looks true to the photos. It’s bright white with a silver plastic finish on the armrests and metal on the wheel base. The seat is wide and long. The arm rests are comfortable and in a good location, even for a petite person like me. I took it out the box a few days ago but got overwhelmed with all the instructions/pieces so I left it in the box until today lol It wasn’t that bad though. Took about 30 mins to assemble. The cushion filling feels like flimsy polyester that will get flat with a short period of time but I’ll see how it holds up. The connection between the chair and the pump seems like it’ll break if you put too much weight on it while leaning back. Mostly because it’s not designed with any give in reclining. I’ll eventually buy a back support pad to add more cushion. I bought this for my home office that’s white, black and gold. The material looks susceptible to peeling and stains however I’ll look into a protective cleaning solution to keep it looking bright white. I probably wouldn’t purchase this again given that I can spend 8+ hours at the computer when working from home and it looks like it’ll wear easily with time. If you’re looking for a chair that’s visually appealing that won’t get much daily use..for the price this will work great for you. If not, my suggestion is to test out the chairs in store and then search the UPC on Amazon. At least you’ll be aware of the quality beforehand. I’m keeping this bc I don’t feel like the hassle of returning. Feel free to like this if you found this review helpful :)

Not really 5 stars, but close enough. This chair was a huge risk for someone like me who doesn't have a lot of money. I must say, it came before its delivery window, which is always amazing. The box was beaten up a bit, but that seems to be a UPS issue since the past three parcels I've gotten from them (including this one), came crumpled quite a bit. Luckily the only slightly fragile thing was this chair. Some minor imperfections here and there, but none enough for me to care. Like one of the arms on the caster has paint chipping off, I can buy car paint, sand it and respray paint it, or do whatever with it, not a problem. Other than that everything was perfect. About Me: Normally wouldn't put this in, but given that this furniture is physique specific, it might help you out. I'm about 65 inches tall (5' 5", ~165cm), and 210lb (95.25Kg or 15 stone), my torso to top of head is about 32in (81.28cm) Pros: -When I first pulled it out of the box, I was afraid that the back was still too short, since tall back chairs are going the way of the dodo (god that's cliche, sorry too cheesy for me), but they are an annoying rarity now a days, unless you want to pay 300+ for them. So when I saw this chair for $90 and free shipping, I took the risk. So back on point, I took it out and unfolded it on my bed and sat in it to check the back height. It's good enough, since it's impossible to find the perfect chair, it seems. It cradles the bottom of the ball of the cranium, and covers the neck, if I sit in my usual position. That 28" that they mention is actually the inside measurement of the back, which is nice. I was afraid that they were referring to the outside measurement, that's about 30" so the seat removes 2 inches. When I'm reclining in it (I have a foot rest of sorts, I use a plastic storage bin), my head comfortably and naturally falls right on to the headrest. -I found it rather easy to install, yes the last two screws that lock the back in place were a bit tricky, and are easy to do alone once you figure out the trick. So at first I thought, I'll sit in the chair, lean back, and place the screws into the slot that way, screw them in just enough to catch, get out of the chair and allen key them. Great theory, terrible in practice. So what I ended up doing with greater success was, using one hand, I pulled on the back of the chair with a light shining on the armrest to see the threading for the screw. Then placing one bolt in that I had easily available on the chair seat, I started screwing it in by hand until it caught. So here is where it does get annoying, you kind of have to use the tooth you get from the few thread turns you got by head since the screws will still be off center. This by far was the most time consuming part, maybe taking 3-5 minutes per arm, but combining my hand strength with using the allen key to force the holes to align better and make sure the screw fell into the slot, I got both in. Everything else up to that point was stupidly easy, except I did screw up and forgot/thought I could put the numatic "skirt" (plastic telescopic piece) on after setting the piston in its home, apparently that's not possible, you have to put it on the piston first, then set the piston. -Love the fact that they give you one extra screw each (arm and base screw), and an extra plastic cover for the arm. I haven't ran into other products that offer that. - the padding on the arm rest cover a great majority of the top, my old chair, had like a padded leather island. It goes half way past the inside-back and about two inches past the downward slope. -This thing can really recline, maybe a little too much, thankfully they've got that nob there to control the recline. - I like the contour on it, it hugs the back nicely, and I think there is enough lumbar support on mine -While the padding seems stiff, there seems to be a decent amount, I don't ever feel like I'm hitting any internal structures, even on the arm rest, my elbow isn't/can't dig into it deep enough to hit the hard structure. I had to add padding to my other chair since it was too cushy and my elbow bore through it like it was nothing, making extended mouse use painful. -This chair gets pretty high. my make-shift (folding table on bed risers, I like customization options) desk top is about 36" off the ground, so it can easily raise itself to a height that makes it comfortable to sit at the desk. Cons: -The padding on my black chair seems stiff at first, I wanted something cushier. Time will tell if I can break it in. -The wheels were and are the only questionable things on this chair, it will be interesting to see how they hold up, if they break, I can buy newer and more durable ones. As of the first day, I would definitely recommend. Easy, prompt deliver, got it the same week I ordered it, so that's cool. Also the material is nice to the touch and feels durable.

I've had three of these "style" chairs in the past few years (they just don't last at this price point) and I swear, even though these are sold under different company names or sellers on amazon, these must ALL be made by the same general manufacturer in china. The pieces, the parts, the materials, all eerily similar from one chair to another.. the base, the arm handles, even the little plastic tabs over all the ones I've had over the years are virtually identical. The other two I've owned were OK (not great) the only issue with both, after a very specific determined time was the faux leather material starts peeling and disintegrating and then WATCH OUT. The stuff peels and goes EVERYWHERE, all over the house, all over your clothes, whatever you sit on it wearing.. I mean the stuff literally takes over your house, it's that bad! However...this was the only gripe I had about the first two chairs I owned. No other issues-comfortable, good adjustments, overall not a bad chair. NOW, this one, let me start by saying my two star rating is VERY generous. Basically, again, almost identical to the other two except in one BIG way. The material-same, cushioning-same, plenty of padding for comfort everywhere except where it counts the most, under your rear end, where you sit! No exaggeration here, believe me when I tell you this, absolutely NO padding or cushion! The most important part of a chair, the part of it where your rear end (and most of your weight) goes has virtually no cushioning! It's like sitting on a wooden bench. Two hours sitting on this and I get lower back pain! I'm a younger guy, I've never had back pain in my life..with this I do! Terrible, absolutely terrible. Now, what can I do, I can't return this. Once assembled there is no way to take one of these apart. That suspension gas piece-the one that allows the chair to move up and down, once you insert it into the lower base with the wheels, it bonds, permanently! It would take the jaws of life to get those two pieces apart. So there is absolutely no way to return this. I have to live with it. I put a pillow to cushion the part where I sit and after two weeks, that pillow is completely flattened because of how hard the base is where you sit. I don't write many negative reviews, I've maybe written one or two on hundreds of reviews, but this thing deserves a BIG thumbs down! Very disappointed, sorry. Do not buy!

This chair replaced an old desk chair I had from my college days. The problem with the old chair was that the pins that connect the rollers to bars were made of plastic and eventually broke (likely from leaning back in the chair to much). This pins on this chair however are made of metal and I don't foresee having the same issue. The chair leans back a LOT. If your like me, and are leaning back frequently/putting your feet up on the desk/etc, then this is the chair for you. After 6 months, it doesnt appear that the cushioning has deflated at all. It's still a very comfortable chair. Total assembly took less than 10 minutes. One gripe I have is that the little plastic circular pieces that are supposed to hide where the screws go fall out for like no reason. After the third or forth time, I took them all out and threw them away. The chair looks great without them anyway! This chair also works very well on carpet, unlike some chair that make it feel as though you're moving through sand on carpet. The chair doesn't adjust to super low heights, so if you're under 5'4" I would suggest looking for a different chair as you'll find leaning back fairly hard to do. Overall this chair was perfect for me and you can't beat the price on amazon. I saw a very similar chair in Walmart for $130, which was $30 more than what I paid for this chair at the time. Highly recommended!

Good but not great. The comfort level could be better the cushion support is not great. More padding would have helped. But overall good.

la chaise est très confortable.ma ,ma première commande a été égaré, et le vendeur m'avait envoyé une autre chaise dans un délai très court. Merci beaucoup, très bon vendeur

Assembling went well, except for a problem I faced. This has to do with the screws of the arm sets into the back seat, specifically the upper screw ( there was no problem with the lower screw). May be this was due to the fact that all the screws supplied (Z28) were of the same size and length, note that they were 8 and not 10 mentioned in the package. Though the chair is assembled I find it inconvenient. I will appreciate your input to fix the problem.

This is a great looking chair. It arrived a few days after I ordered it. It feels good when sitting, good padding on the seat and comfy but when leaning back its very uncomfortable. It feels like something is poking my right lower shoulder blade. I have a thick blanket on the back of the chair to help but it shouldn't be that way. Il have to find some kind of cushion for my back.

Dont listen To those who are complaining....they are probably complaining about everything. Im a businessman....the chair is AMAZING in every points.159$ is a joke for a chair like this. Solid...comfortable....Perfect.