Whizzy Wheel Wonder Wheel Adhesive Remover and Car Decals Eraser Kit - 4-Inch Rubber Wheel for Removing Stickers, Decals, and Vinyl - Ideal for Vehicles, Drill Adapter Included

This is an amazing product. It truly is a miracle! Wish I knew about it years ago. Can't say how many times I struggled to remove adhesive from a car and ended up scratching the paint. Don't waste your time using razor blades and scratching your paint; your fingers and getting blisters, your finger nails and breaking a nail; a heat gun and burning yourself; or Goo Gone and making a mess! What would have taken me hours to do in the past using the above mentioned methods, I was able to get the work done in 5 minutes! And the results were amazing. No double sided tape adhesive remaining and not a scratch! Buy this right now if you ever plan on removing vinyl decals or 3M double sided adhesive. You will thank yourself later. This eraser wheel basically works by creating friction and generating heat. It is no different then if you took a heat gun to the adhesive and tried to rub it off with your finger. This is just WAY more effective and effortless. Attach the wheel to your drill, put it on high speed, and apply medium to light pressure to the adhesive you want to remove. You will witness the adhesive being removed with ease! I am sure this is comparable to the 3M eraser/stripe off wheel but it was half the price. Glad I went with this. Saved me money and a lot of work. Take a look at the pictures of the Whizzy Wheel's work! Also, after removing the adhesive with the Eraser Wheel, I went over the area with Goo Gone to give it a good final clean.

I bought both the slotted and solid wheel. Far and away the solid wheel works best. I use both on my boat to remove 26 year old striping. The slotted just melted and disintegrated in a short time. Left tons of slag behind and did little. The solid wheel on the other hand zipped right through the whole boat in under 40 minutes with minimal wear or residue. The solid is a better value. Works faster, lasts longer and is much cleaner.

I usually don’t leave reviews but felt compelled to leave one for this item. It actually worked very well. I was hesitant and afraid it would damage the clear coat, but figured I’d give it a try. I’d removed pinstripes from another 1992 Mazda Miata the old fashioned way and found that it left fine scratches that needed polished out afterwards. Used it with a Dewalt 20V right angle drill, kept the speed low, and the edge flat with the surface. Tried it on an inconspicuous spot first and found that it didn’t damage the clear coat. Removed the pinstripes from this Miata in about 2 hours. Still had to polish after done removing the pinstripes, but that was to try to blend any clear coat / fade differences between the body and where the pinstripes were … not because it was scratching the clear coat. These will make some mess … they’re like big erasers. And don’t get too close to edges / rolled edges … you’ll lose paint. But paint never sticks well on edges and my flub was not a flaw of the product but rather the usage. I’d recommend trying them.

Wanted to remove the beltline molding on my 1997 Ford F150. With age it had started curling up on the ends and just looked bad. I watched some YouTube videos and this rubber wheel seemed to be really good at removing the left over adhesive as I've tried doing this before to catastrophic results and the use of gallons of Goo Gone and days and hours of my life spent trying to get rid of the left over adhesive and this thing really made short work of it. If this is what you're buying this wheel for here are some things you should know, get a 5 amp CORDED drill at least. My little 1.5 amp 20v cordless could barely get this wheel spinning fast enough for it to work the way it's supposed to. The cordless did fine removing an old dealership decal that was on the back of the truck but it was barely touching the left over adhesive from the molding and burned through batteries really fast as well. Go with corded to really get the proper performance out of this tool as it seems to work better the hotter it gets. It did burn through all the adhesive, it pretty much wore the wheel down to a little nub and there is little particles of rubber everywhere so wear eye and lung protection unless you enjoy breathing in little rubber particles. I have no complaints about this little tool, even after everything was done my wheel still had a little rubber left on it so I took some really baked on epoxy off from back when this truck must have had those vent shades around the windows and it made pretty quick work of it. Works really good if you use it right. Keep in mind with any of these kinds of epoxy based adhesives it is going to leave an etching in your paint that this wheel can't do anything about. You have to wet sand or clay bar that stuff out. But it'll at least get rid off everything that is ON the paint just not the stuff that is IN the paint. NOTE FOR IMAGES: This wheel did not damage my paint. The problem was already there with the paint itself as it was really soft and uncured under the molding I removed and it lifted the base coat right off and went down to the primer when I wiped the area down with rubbing alcohol and a paper towel to clean the area every other section I used this wheel on was fine so don't worry it won't hurt your paint.

Used this to get rid of the leftover adhesive from my old bug shield on my truck and it worked great. It removed all of the stubborn adhesive I couldn’t get off by hand and didn’t scuff my paint or leave any marks behind. After using it, it looked like nothing had ever been there. Huge time saver if you need to clean up old adhesive without damaging the finish.

Because I'm essentially a moron, I began an automotive modification (rear carbon fiber spoiler) project on my BMW M3 at 10 PM on the night before an Auto Club Meetup Sunday morning. Because life hasn't beat me up enough with rampant idiocy in society, bad weather, the pandemic, aching middle-aged joints, and the Red Sox loss, I guess I just wanted to add some more misery to my existence, so I began this project late that night. I've done a number of smaller/medium body/mechanical upgrades/repairs on my cars, motorcycles over the years, and although I'm no Mr. Goodwrench, the results have always been solid. Well, after removing my stock decklid spoiler, revealing that long, wide strip of old double-sided tape, I knew my streak of good-ish completed jobs was OVER. I tried all the tricks that were recommended to get the strip off: Heating it with a blow dryer and trying to bead up with thumb, Goo Gone and a hard rubber scraper, sobbing uncontrollably until a neighbor comes over and does it for you. Nuttin. It looked like crap, and nothing was working, and I had a rear trunk that looked TERRIBLE and I had the car event in the morning. THEN, I remembered this little doohickey that I'd ordered a month earlier in anticipation of this project (but had forgotten about). OMG x infinity!!!!!! As soon as I attached this to my cordless drill and pressed it down on the tape, it began to bead up the material (leaving a fine, yellowy mist that just brushed off the car and didn't hurt the paint) quickly and perfectly, leaving me astonished. NO product in history that I've ever purchased worked so much better than expected. It OBLITERATED the sticky tape and did zero harm to my car. I removed it all in less than 5 minutes, no joke, and then cleaned the surface with a little Goo Gone and alcohol and then happily installed my Carbon Fiber spoiler. I'm not gonna lie, I cried a little. This product made me emotional. It made me happier than a Reeses Pieces Sundae from Friendly's. It made me proud to be a human for the first time in a long time, as some human out there invented this incredible wheel of joy. I would buy one for all of you out there except I have too many other mods I'm doing to my car and checking account balance looks as robust as a dust bunny tumbling across a wood floor when the heat kicks on. Do yourself a favor, though, and buy one for yourself, even if it's just to stare at and admire. THANK YOU WONDER WHEEL!!!! xoxo

It works well as it should and easy to use.

I ordered this wonder wheel adhesive removing wheel to help me out getting the adhesive left behind from the body molding off my truck. I've seen these things used before and they really seemed to work great. They probably do in the right scenario but in my case, not so much. The molding had left behind most of the adhesive strip in the truck and this thing would not take it off. The wheel itself ended up deteriorating more than the adhesive. It would however, remove the tiny bit of residue left behind after I had soaked it with solvent and scraped most everything else off. By then I just used a soaked rag to get the rest off. I can say, when I did use it, it did not damage or mark my paint at all. Just like it's supposed to do. I probably just tried to do more with it than it's designed for, so I'm not going to be too hard on it as I can definitely see it working great on stickers or decals, more like it's intended for. I will keep it around for that purpose but I am disappointed it didn't work with removing the molding adhesive. It would've saved me a lot of time.

E' un ottimo prodotto ma mancano istruzioni sufficienti, quindi c'è il rischio che assieme all'adesivo rimuova la vernice sottostante. Avevo inteso ci fosse un manuale assieme ma ho ricevuto solo la rotella.

I required a decal remover hopefully it will do the job.

Worked very well! Took off a relatively small sticker on my bumper pretty easily :)

Works like an eraser. Plastic scrapers wouldn’t touch the 14 year old boat decal. The wonder wheel took one side off in about 40 minutes. Saved me a lot of time and energy. Messy but effective!

Soldi buttati, ho provato a togliere la colla dei pesetti di equilibratura dall'interno del cerchio ma non è servito a nulla. Si rischia solo di rovinare la verniciatura del cerchio. Una schifezza. Sono dovuto andare di Benzina o WD40 e tanta fatica per togliere la colla. Non lo userei mai sulla carrozzeria della macchina.