FLASH HOBBYD2830 Brushless Motor 1000KV Outrunner Motor RC Plane Motor for RC Aircraft Helicopter Multicopter Drone Fixed Wing

It really is a magnificent product y and this engine performs very well.

After having great success with this motor driving a 9x4 2-blade prop on a custom rebuild of an FMS 800mm A6M Zero, I purchased a second to drive a pusher-prop F22 home-build as well.Both planes fly great, and the motor happily supports 2s-4s batteries with the correct propellers and ESCs!I've got just over a dozen flights on both with no complaints.Motor kit comes with bullet connectors pre-installed, as well as cross-mounts for direct-firewall mounting as shown in my pictures.I've also got two other Flash Hobby motors in different sizes that have also performed flawlessly.Will definitely continue using these until I have a compelling reason to switch brands for my builds!!

put this in a 44" wingspan 3d printed piper cub, it flies it easily. My only gripe is the wires comining out of the motor are the actual stator wires, solid core and with a fragile thin silicone insulation that if bent to far can split open. I repaired mine with heat shrink tube and it worked fine. Ran on three cell for about a 10 minute flight on a 8x4 prop....

This is a great little motor for items that it was intended to be long on... But way too small for what I need.... had to send back.

Very impressed by this little motor. Running with a 9x7 prop turned out to be extremely efficient with my Gamma 370. After 10min of flight on a 3s 2200 I still had 3.95 per cell. If I pushed it I bet I could achieve 15-20min flights. Motor had plenty of power and stayed very cool considering I was flying moderately aggressive at times.HIGHLY recommend the 1000kv.

Descent motor but no a lot of power when compared to other 850kv motors I have. Plane feels sluggish and under powered during mid flight.

low coast fast shipping works great on my mini ultra stick from the 90's

This motor is awesome power to weight is incredible