OVERTURE ABS High Strength 3D Printer Filament 1.75mm, 1kg Black | Low Warping, Excellent Durability, 1kg (2.2lbs) Dimensional Accuracy +/- 0.02mm, Fits Most FDM Printers (Black)

Using this filament with a Bambulab P1S, it was very easy to set up a filament profile to get strong and neat looking ABS prints with the default Bambulab P1/X1 process profiles. There is some odor during printing, but it is manageable and worth the hassle for strong parts that can withstand higher temperatures.Started with the default Bambulab ABS basic filament profile, then changed the bed temperature to 95c, changed the nozzle temperature to 265c for all layers, and set the max volumetric speed to 16 mm^3/s.Higher max volumetric speeds can result in inconsistent layer appearance and layer adhesion issues. Using a PVA gluestick helps prevent prints from lifting from the bed, but for models with a very small first layer footprint, using a brim may be necessary.

I've purchased at least 30 spools of Overture ABS over the past 8 months in just about every color available and have had nothing but great results. Never had one issue with bad spooling or tangling. Prints like a dream on my X1C. Bed adhesion and warping have not been a problem. Really just a consistant quality material since I've been purchasing it.

Overture did it again! This is my second roll of ABS filament and is incredibly easier to use than that garbage I bought the first time. It may warp so you may want to keep it enclosed but it's not that bad. Great layer adhesion, great initial adhesion. Looks fantastic and does a great job. I didn't have to dry it either.My settings:First layer: 255c x 110cother layers: 240c x 100c

I print functional parts that have to hold up to abuse. I'd been printing with Esun ABS+ for a couple of years and was pretty happy with it, but when I needed to buy more recently it was sold out everywhere. I decided to give this a try and to my delight it's even better and easier to print than the Esun ABS+.I print this on a direct drive all metal hotend Ender 3 Pro and an Artillery Sidewinder X1 onto PEI coated spring steel. My bed temperature is 105 and my hotend temperature is 155 or 160 depending on the printer. I do use a raft for some parts, depending on their geometry, but most of my prints are directly on the textured PEI. It has a moderate odor when printing that an enclosure will almost totally eliminate in my experience.Prints are strong and have a good surface finish. The printed surface is a bit shiny, that's the only aspect that the Esun ABS+ is superior in. The Esun ABS+ has a matte finish which I find much nicer than the shiny finish with the Overture.

Good filament. Doesn't seem to be as strong as other brands. Does not have a heavy ABS smell when printing so I'm guessing its some kind of ABS blend. No issues with clogging or breaking or anything. Prints look good. Overture hasn't let me down so far and I've bought a ton of different filaments from them.

There are some advantages to ABS - stronger, and holds up better in a hot environment. But all the other ABS material I have used has been extremely finicky. This material is still a little more fussy than PLA but much better than other ABS.What has worked for me:1. Try to avoid raft or other build plate adhesion structures. A dusting of cheap hairspray on the plate helps. For one large part that was prone to warp up off the plate, I just made a larger flange around the bottom that I cut off later.2. 250 degrees nozzle, 100 deg build plate. 40m/s. Layer thickness 20 to 24.3. Keep the material in box with desiccant when not printing.

This stuff print just fine. Will keep buying Overture!

In the past I have found this brand of filament to be a reasonable buy.However, my current purchase is very disappointing with many hangups due to improper spooling and broken filament.I can no longer recommend this product.