SKIL 15 Amp 10-Inch Jobsite Table Saw with Folding Stand-TS6307-00

I’m not a cabinet builder, but I do need a table saw from time to time for projects around the house, and I’ve been very impressed with this SKIL 10-inch jobsite saw. It’s affordable, portable, and the folding stand makes it easy to move around and store when I’m finished. Mine has made good, reliable cuts every time I’ve used it and has been more than enough for the type of woodworking I do. If you’re building fine furniture every day, I’d probably step up to a professional-grade table saw, but for the average homeowner who wants a dependable portable saw without spending a fortune, I think this is a great option and would recommend it.

After a lot of research, I found that this was the best saw for me in my price range that would allow growth with additional capability. I had been warned in some of that research that the miter gauge is a weak point. That turned out to be true. It is only 12" long and has a very small surface. Cross cutting a 3/4" 30"x12" board turned out to be more than I was comfortable with the included miter gauge as it was hard to handle. So I am replacing that with a better one before completing that project. (currently waiting for it). When cross cutting small trim pieces, that was far more tolerable. The fence, adjust ability, ... all worked extremely well. I went through the setup and checked all alignments. It came from the factory perfectly aligned everywhere. Rip cuts that fit on this are a joy compared to my having tried to use a circular saw and straight edge before getting this. From the photos, you might think stability would be an issue. Stability isn't an issue at all. That was proven out when I found I was comfortable ripping 23/32" 4x8 sheets of plywood on this by myself. It is a massive step up from the circular saw I had been trying to use. Saved me from having to buy a track saw. A track saw would still be required if your rip is over the approximately 25" max rip capacity. With a vacuum attached, sawdust is not an issue at all with only a tiny amount of saw dust left on the surface after a day of cutting. Instructions are great. I needed an education since it has been 45 years since my wood shop classes and working with my Dad on his table saw. One concern is if you read the instructions, they state that the kerf of the blade that you use must be .1" or greater to be compatible with the riving knife and prevent kickback. However, most of the blades I found were under that. I ended up going with one that was .098" and that has been cutting like a dream without issue. If you order this saw, I would recommend you order a better miter gauge if you don't have one. Otherwise you will have downtime while you wait for the better miter gauge. At the time of writing this, I have not used the advanced features like bevels, miters, dado, or rabbits. In short, I would buy this again. Just know you will need to additionally have: - better saw blades - dust collection - better miter gauge

Good saw with plenty of power, especially when paired with a good blade. I've been able to get nice, accurate cuts and easily build a couple of things in the few short weeks I've owned this. Right out of the box everything was in true and I've not had to make any adjustments to the alignment. Additionally, I like the size and weight. I wavered between this and the Dewalt model (twice as much), but the Dewalt is appreciably bigger while this saw fits fairly well on a shelf in my garage. No issues with the sturdiness. It doesn't move or wobble when I use it but I can still lug it from one side of the garage to the other without throwing my back out. There are obviously bigger, better table saws out there, but for less than $350, this is a steal and fits the bill for 95% of the projects I'll need to do. You will probably want to upgrade the miter gauge asap to something better. The included miter gauge is just awful. The fence isn't all that much better, but isn't nearly as bad as the miter gauge.

A handy and functional table saw that stows easily in your garage and is nicely priced. Ripping 1x or 2x boards with a circular saw is a huge pain. A bench saw requires a sturdy table you can screw or clamp to. Not to mention panel stock is too big for the fence. I upgraded to this saw and it fits the home DIY bill perfectly! Reasonable price, compact storage, and adequate functionality for most tasks. This and my 12 inch miter will probably more than serve my DIY lumber needs for the rest of my days! On the other hand, there are a lot of plastic parts. I would consider it a light to moderate duty tool, not heavy duty, and I would not use it for major construction projects unless I expected it to be short lived. It will probably not hold up to the stress for a long time and fail under an extended heavy load.

The resolution to my woodworking hobby! A table saw is sooooooo versatile. The reason I bought the Skil table saw is for the Rack and Pinion Fence rails ensuring fence stays parallel to blade, micro adjustment capability, the built-in foldable stand/legs, durability, and lastly pricing. Table length 25", rip capacity is 25.5" (length) and 24" wide, blade capacity is 10" and can be installed 8" dado blade set (though I have not tried this because I don't have a dado blade yet). Though it has a dust port elbow, having a container is a little help, saw dust is inevitable so I am working on a shop-vac to minimize the spread of it. I never keep the factory blades, my go to carbide are Diablo blades. Disclaimer: I am a woodworking novice, so for me this table saw is enough for the things I do in the house.

I did JUST get this saw today but already put it through a few cuts. (This review is not for longevity but initial build quality). As of right now, I love this saw! The stand is far more stable than I was expecting. When folded up, the saw isn't too heavy and very easy to move around It cuts like butter; it has plenty of power (I haven't cut anything larger than 2") It was very easy to set up And finally, it packs away very nicely. It's like there's a place for everything. I can't wait to use it more.

I purchased this a couple of months ago and finally got to use it. As a DIY'er tihis purchase was a no brainer. I've never used a table saw before and read the instruction in and out. Everything was easy to use. The set-up was simple and needed minimal time to do so. The blade sat at an almost perfect 90 degrees. When repositioning the blade the locking mechanism secures the blade effortlessly. The materials used to build this tool is of quality metal. The dust collection comes with a bevel attachment to direct the saw dust as you like. The size and weight is perfect to transport without help. When not in use, the legs fold back and it easily fits on my metal shelving. I am very pleased with this table saw, if you are looking to purchase your first table saw, don't look any further. For the price, you won't go wrong.

This is a 5 star saw if you are using it for home projects. It probably would not stand up to regular daily use on a construction site but other reviewers may have experience using it in a construction environment and might disagree. Having said that, it is plenty powerful and accurate for most home projects. I used it to rip long thick Mahogany boards and it did so with ease. As with any power tool don't force feed it and it will cut hardwoods very well. I am impressed with the clever design. All of the accessories, rip fence, miter gauge etc. store on the saw and the whole thing folds to a very easy to store size. The saw was adjusted very well at the factory but I checked all the adjustments per the manual and did some fine tuning. The adjustments are easy to do and I found the cuts to be clean, smooth and accurate. There is a lot of plastic used in this saw but that is how they keep the price way under all the other major brand manufacturers. How these parts hold up over time is yet to be seen but it comes with a 3 year warranty. I had a 50 year old table Craftsman table saw I inherited from my dad but after restoring it and using it a few times there was no place to store it - it was big and built like a tank. This saw suits my current needs and since it will not be used on a regular basis I hope it will last for a number of years. I recommend this for a DIY and home use but I defer to other reviewers for any job site type of use. For heavy use you might want to compare the Makita or Dewalt saws. I like the convenience, power, accuracy and thoughtful design of the Skill table saw. One final note: several reviewers have mentioned that the throat plate is made of plastic, mine is cast aluminum and is adjustable which may be a change since the earlier production runs. I purchased in October 2025.

天板がだれてハジの方で真っ直ぐじゃなかった。 ちょっと残念。 でも他は扱いやすくて良いとおもいます。 高い金払ったんで、楽しみながらやっていきます。

I just returned a new Ridgid 4518 because it was impossible to square and set up. It was very cheap material wise which really surprised me because I am a fan of Ridgid. Don't buy it. Save up until you can spare $200 more and buy this Skil. It is really amazing. Accurate and square right out of the box. The rack and pinion fence adjustment is so good. Truly a well engineered tool. Lots of power and finally a saw that controls the dust fairly well. I have a lot of confidence in the saw which is important when working with a tool of this nature. Highly recommend you get this tool in your shop.

Una excelente maquina, su guia es precisa al milímetro, su construcción es muy sólida y su potencia es excelente para su tamaño, el contar con patas abatibles la vuelve muy práctica, tal y como afirman en youtube... la mejor de su categoria. En dos años y medio no conozco a nadie que no este encantado con ella.

No podría haber otra mejor opcion. La compre debido a las excelentes reseñas que encontré en vídeos (de americanos) y concuerdo completamente. Es muy practica para transportar, muy precisa con el mecanismo de gusano para la guía, fácil de calibrar, potente —incluso más potente que la DeWalt, porque tambien la probé— y duradera. La he trabajado por dos años casi a diario y sigue dándole. El único pero que le pongo es que es muy ruidosa en comparación con la DeWalt y la Bosch de esta gama.

Perfect size for hobbyists. Didn't want to lug around a frame and wheels. And the saw came zeroed on all adjustments. Great saw for the price. And customer service was fantastic at getting it to me when I needed it.