Ceramic Headlight Restoration Professional Detailer Pack (20 Ceramic Wipes) - Brings Headlights Back to Like New Condition - Step 3 Only

Works great great quality durable easy to use be sure to sand completely

Amazing and quick job

It works great. I only bought Step 3 wipes because I already had sandpaper. The prep does take a little time, but usually less than 10 minutes per headlight. Using wet sandpaper from 800 to 2000 grit gives perfect results every time. The CERAKOTE coating protects the headlights for at least a couple of years. One packet is enough for two headlights if you apply it quickly.

Cerokote is a really good product especially for the price and the kit is by far superior then any other kits out there. There is only 1 issue I have with it. Step 3 the wipes , it starts to dries immediately after your 1st swipe along the lens and if you try to go back to a spot you think didn’t cover good enough you will get streaks ! But if you think your going to slow down and over think it you will get runs but not runs like painting a wall but just a fine line of a run. After sanding there shouldn’t be any shiny clear sections it should all be hazy. If not then you didn’t sand enough. I always at least start wet sanding at 800 , 1000, 3000 you can put in a 1500 if you want. If the lens has already been clear coated then you will have to start at 400. Most lens are just yellow and the wipes get all that surface yellowing off the 2000 sandpaper they give you gets any embedded yellowing out and the 3000 will sand down the scratches from the 2000. Also use any king of dryer to not only dry the lens but the seam around the lens. If just 1 drop pops out while you are applying the wipe it will leave a streak. Do yourself a favor and watch Cerokotes YouTube videos and any other YouTubers videos and watch what they do or don’t do. The next best headlight kit would be 3m kit but Cerokote kit gives you more then enough oxidation remover wipes to get started and they give you real sandpaper. Just remember step 3 the wipes can be tricky you get just 1 swipe there’s no going back to do a touch up. Hope all this helps.

I used this stuff on my morimoto headlights that have developed fire craks from uv exposure. I am hoping that it will stop any further uv problems. On our subaru it took the hazing away and left the lenses looking new.

I have this car that needs to be painted with pealing clear coat but it's not worth getting painted, after using their kit to restore heads lights, which worked great. I thought, what if I buy the pro pack and just do the whole car? Well let me tell you, it's a pain and slow process but the results are unreal. It made the paint just shine like it had a nice new paint job and nearly hides the pealing clear after some prep. It's been a few weeks since I did this and the car isn't even dirty, when it rains the dirt comes right off. Honestly this should make a kit specifically for this. Even their own ceramic coating kit doesn't give results like this.

I don't know how they did it, simple to prep and apply and it just works. I would only advise you read the instructions properly and don't double pass after you applied you will haze it. I made the error and had to strip it back and wet sand, after that I got the cleanest set of lights.

It works very well, the first original pack did not have enough of the ceramic headlights for me to do multiple vehicles. The first one I did, I didn’t prep good enough. The second one turned out perfect. I wish there was more ceramic pads in the kit matches the amount of the cleaning pads. However, it is a good product.

Works great

The said pro-pack #3 come total 50 pack for 25 vehicles but I only received 20 pack work for 10 vehicles only.