Glorious Gaming 36x Panda Mechanical Keyboard Switches (Tactile) - Fits All GMMK Keyboards & Numpads, Snappy Bump, Buttery Smooth Travel, Original INVYR Moulds, 49g Actuation, 3-Pin Mount - Unlubed

Thocky, responsive, very nice indeed.

Excellent switches, nice and smooth to use, fit in the keyboard perfectly.

After reading rave reviews of Glorious Pandas being almost as good as the Holy Pandas I've decided to give them a shot. Switches are great but not really what I've expected from a tactile switch. They have a very smooth and round tactile actuation compared to other tactiles with a sharp actuation. Maybe it's just something that you get used to over time. springs could be slightly heavier maybe 65-70g. But I think that the biggest downside is that fact that they absolutely need lubing, process that took me maybe 3-4 hours. I usually avoid unlubed switches and probably will continue to do so. But overall a good tactile switch although not my favorite and unless you want nice RGB, I would probably go with Akko Jelly Purple with much stronger tactilty, and also coming pre-lubed.

F * they sound awesome!!! I used unlubed.

Over time a few switches seem to be not reading properly gets real annoying fast. They come with extra if you have a 60% so not too bad.

The Glorious Panda switch is truly a state of the art experience, but only IF you are: -- Lubing them correctly. -- Fitting them to a good quality keyboard. -- Using a decent set of keycaps. If you are, then you will love them. If not, then you could be in for a tricky time. I'm knocking a star off because I tend to see quite a high failure rate with them. Out of 35 pieces I will often see at least 1 or two going in the bin or broken for spares. The pins are very delicate and if they get compacted in insertion you have pretty much had it with that switch. But.. all that said, they are pretty much unquestionably, the nicest and snappiest tactile switch out there and are very hard to beat.

For the most part these switches are quite decent. Despite what a lot of reviewers have said about the lubing inconsistency I will admit I do not really notice a difference. I can tell of course that there are some minor differences from switch to switch but it doesn't bother me at all. They sound really nice to type on with a great tactile response and they all sound great. The issue I have is with the pins. Coming from the factory pins should not be as bent as these ones are. A few of them were horizontal! To me, these switches err on the 'premium' side and the quality control on these things should be a lot better. The product description says that only the best materials are used, but these pins are weaker than the Kailh Brown and Cherry MX Brown pins that I own. Trying to align the pins with the PCB myself, seeing they are disjointed, I managed to bend 4 of the pins in 2 packs to the point there was no salvaging on the original housing. I had to make a Frankenswitch using Cherry MX Browns for the bottom housing (surprisingly it worked out quite nicely - I'm calling them the Brown Panda). Would I buy these pre-lubed switches again? I don't really know what the market is like out there for switches so take this as it is: I would say these are decent switches and I would buy them again now that I know what I am getting. I would probably keep some additional MX Brown switches on the side to make Brown Pandas if the pins turn up in the state they were in last time.

セールで安くなっていたからパンダ軸を買った。初めて使うからグロリアスのパンダ軸がほかのと比べてどうなのかは言えないけど、この軸単体の評価はできると思う。 パンダ軸をパルサーPCMKに差してみた。今までは静音ピンク軸３５g。軽くて誤爆が多いけど、パンダ軸は結構重く感じる。でもすごい重いわけではないからそのうち慣れると思う。音はこもった青軸。知っていたつもりだけど意外と音は大きい。夜は気になるけど感触は結構好きかも。タクタイル感がすごくいい。打っててなんかうまくなった気にさせてくれる感じ。未ルブのものを買ったけど、自分でルブしたので、その辺は買ったものと違うかもしれない。でもアメリカで人気があるのもわかる気がする。 星が一つマイナスなのは個数が書いてないところ。レヴューを調べれば書いてあるけど、個数が分からなければ買いづらい。 ただパルサーの基盤とはあまり相性が良くない感じ。スイッチがキツキツ、ピンが曲がって２個ダメにしました。 ただリピートがあるかというとないだろうと思う。やはり音が気にる。静音から移ったから余計なんだろうけど。

Totally worth the price and it gave me the experience I expected.

Good feeling and sound, as expected. It brings 36 switches as advertised, but would expect more for the price, or an option to select how many you would like, since I require 29 (may be slightly off) more to finish my 65% keyboard; with this, getting another package would leave me with more than needed.

Ive been using MX Cherry (and clones) for years. Ive gotten incredibly used to those switches and bought these hoping to step up. Overall, I think these are great. They're quieter than the blues I'm used to which is a little bit of a downer. The feel of these is pretty nice and typing on them is satisfying. They're a little stiffer in my opinion throughout the press but they feel smooth overall. Ive only got 2 real complaints with these switches: #1. The price. Either you think these are a fair price or not. They're pricey but are of quality. #2. Packaging. Honestly, for the absolute premium that's being charged for these I expected the packaging on these to be premium as well. Instead, you get the old "bag of switches" delivery method. This ended up causing some bent pins and in the instance of 1 switch, causing one to not function. With that out of the way, these are a premium switch. They feel nice, they look great for RGB builds, and for my build they were easy to install (except for some minor damage). Hopefully the packaging gets better so that these switches don't get banged up in transit.

Tactile and enjoyable, not too loud. A bit expensive.