for MagSafe Car Mount Charger 15W Air Vent Dashboard Fast Charging | Magnetic Phone Holder Car Wireless Charger Accessories for iPhone Air 17 Pro Max 16 15 14 Plus 13 12 Mini, Galaxy S25

After weeks of testing various wireless chargers from lots of different brands (Mous, Spigen, Belkin etc) I was giving up hope until I found this one. Some of the other brands were okay to charge my device but had next to no grip for a car mount. Some of the other brands simply refused to charge my device and the excuse was "it's not an iPhone so we can't help"I have to give this charger a solid 5/5 or 10/10 whatever you like because it does what it is supposed to do brilliantly. It charges my phone fast and it holds my phone securely.Grip strength:Incredible! You can see in the video me slapping the phone to see quite when it'd fall off. You could go over a really nasty speed bump and it'd hold on just fine. One of the most expensive branded mounts I tested (mous) fell off after placing the full weight of my phone on it let alone trying to drive!Charging:This was my key issue with all of the other chargers. I have a Google Pixel 7 Pro and everyone says that they are not compatible - this is not true! I used an ESR Ring mount on the back of my Spigen case and when working with this wireless charger I get the full 15w charge as indicated on one of my images. Other devices would do 5w or be intermittent jumping between fast charge and no charge. This starts slowly for a few seconds then ramps up to the full 15w as expected. On a 5v only supply this will draw about 1A, at 9v it'll do a bit more but when the charger allows 12v you get the full fast charge from it. I've tested this with an in-car plug and various chargers for around the house to check the actual output. to get a solid 15w is GREAT.Fit:I've had issues in the past with vent mounts for phones and the way this mount is designed makes the hold a lot better. The little leg that folds down at the bottom takes all of the weight out of the mount so the phone just stays put. Once it's in the air vent it doesn't move and it can take some aggressive driving easily. You can hear the firm click when the phone mounts to the charger.Modifications:I modified my charger to sit on a Brodit pillar mount. This was as easy as taking off a single screw and using some 3M tape. This means it can sit neatly my my A-Pillar and it's REALLY secure. There isn't anything wrong with the vent mount, I just prefer to have my phone in that position and I've found suction mounts don't get the correct angle. I've been using a piece of metal in a phone case and some magnets glued to the brodit mount for about a year so swapping to this far neater and easier solution is great. No more plugging in wires too.

I bought this for my last car about a year and half ago before car was stolen, didn’t ever let me down, would get warm bc I’d have heat running and it’s mounted to vents so it’s not the products fault, only thing I was able to say bad about it was the vent clip wasn’t too strong so in the 18 months I had it, it fell off the vent maybe 10/15 times. That was the only let down. In terms of the magnet, it never failed my phone never fell off it was the clip that made the actual charger fall off.Now I’ve bought another one for my new car same company but they’ve seemed to have upgraded the clip it was so strong when I took it out of the box I genuinely thought the ends of the clip were glued together couldn’t unclamp them, hasn’t fallen off the vent once, decent charging rate (it’s common knowledge that a wired charge connection will always be faster. Definitely worth the money I’d highly recommend. Could do with a slightly longer wire than the one provided as there wasn’t much free hanging cable left after I wired it from the cigarette port to my right vent, still managed to reach easily but you’d want a wire that’s slightly longer in case you’re tucking the wire in properly into the dashboard gaps.

There are very few options on the market at the moment in terms of a Magsafe compatible car mount, and there definitely doesn't appear to be one at all that will charge an iPhone at the same speed/power as the Apple Magsafe charger, so you are stuck at 7.5w (Qi) no matter what you go with.From that point of view - charging speed - this is as good as anything out there.As with every other product I have purchased from ESR, it is nicely packaged and of decent build quality.This will fit most vent types that I have now or have had in previous vehicles, however one of the biggest issues for me is the fact that the clamp is restricted to only being able to insert a couple of centimeters into the fan grill, despite the arm being at least double that length.This results in occasionally the whole mount coming adrift (if you knock it or move the phone in a certain way). It also means that the phone is some distance from the grill where it is mounted, resulting in it being less stable than if it is mounted flat to it. I have until now used magent holders in the grill and I like how flat to the dashboard one can mount a phone, and how stable that is.Mine is currently mounted in a VW Amarok and I am off road quite a bit in the countryside during my work, and the mount (with attached iPhone 13 Pro Max) does bounce around, increasingly as the ride gets bumpier. HOWEVER, apart from the movement, the phone (currently in an ESR Cloud HaloLock case) has not once fallen off from the mount. The level of magentic grip is excellent.I have never used a Qi or Magsage charger previously, and I am very pleased with the level of charging on my phone when using it, however I have just moved to a 13 Pro Max whose battery is astonishingly good so it may not be the best test of how well a phone is charging as mine spends most of its life at 75 percent plus.In summary, I am pleased with the holder which is sometimes in use for 16 plus hours a day, it could just do with being mounted closer to the dashboard, which would eliminate the movement on the holder over rough ground and make it as close to perfect as one might expect for a 7.5w Qi charger.It definitely appears to be the best option available at the moment.EDIT: ESR reached out to me and offered me the opportunity to try the dash mounted version of this at no cost. It was sent out and arrived next day. The dash mounted version is a pretty solid piece of kit and it is to an extent far more rigid in use than the vent mounted version, however it isn't what I wanted - I wanted a vent mount.That being said, the more I have used it the less I have noticed the vent mount moving and perhaps it was me being a little picky and with the fact that ESR tried to offer an alternative at no cost, I have added an extra star.

The ESR HaloLock Magnetic Wireless Car Charger is a must-have accessory for your iPhone 13 series. Designed with MagSafe technology, this car charger offers fast and secure wireless charging for your iPhone 13, iPhone 13 Pro, and iPhone 13 mini.The built-in magnets ensure a perfect alignment between the charger and your iPhone, providing a stable and reliable charging connection. With the magnetic attachment, you can easily mount and dismount your phone with one hand, making it convenient and safe to use while driving.The ESR HaloLock Car Charger supports fast charging, allowing you to power up your iPhone quickly on the go. Say goodbye to tangled wires and fumbling with cables while driving. Just snap your iPhone onto the magnetic surface, and it will start charging instantly.The air vent mount design keeps your iPhone within easy reach and at eye level, so you can use navigation apps or take hands-free calls without distraction. The adjustable viewing angles ensure optimal visibility, making it a perfect companion for your daily commutes or road trips.The ESR HaloLock Magnetic Wireless Car Charger is not only compatible with the iPhone 13 series but also works with other MagSafe-enabled devices. This means you can use it with a wide range of MagSafe accessories for added convenience and versatility.Constructed with high-quality materials, the ESR HaloLock Car Charger is durable and built to last. The secure grip and anti-slip silicone padding ensure that your iPhone stays firmly in place, even on bumpy roads.Experience the convenience of wireless charging in your car with the ESR HaloLock Magnetic Wireless Car Charger. Stay connected and powered up wherever you go, and enjoy a seamless and efficient charging experience for your iPhone 13 series.

Absolutely amazing car mount charger that holds the phone with the magnetic case really good. Testet on multiple road surfaces and at various speeds as it doesn't move an inch thanks to extra support against the dashboard. Highly recommended. Will get the one with the cooling fan as well.

I have to say that at first I was a little cautious about this product fitting into my car as the vents are in a “funny” position. That is they face away from the driver. I needn’t of worried though as the HaloLock is fully adjustable. The “plate” is fixed into a ball that is fully adjustable and can be placed in a good range of positions (see pics).After using for a few days I have to say that this is a very impressive product. I took it out on a good 2 hour drive and there is no way that the phone can drop off the HaloLock. The magnets are very strong. The unit fits into the car vents with clips and also a “plate” that gives it extra grip. The magnets provide a firm grip and as I say, there’s no change of the phone falling off.The unit has a small adjustable arm that allows you to position the phone the way you want it. Another thing that I like is that you can place the phone in landscape mode with is perfect for using Maps on your phone. Charger works fine as well. As soon as you connect the phone the charger comes on. I should also point out here that you can still use the HaloLock without the charge function, you just don’t plug it in. The unit is also easily removed from the car. Also, it doesn’t leave any marks like some holders that are installed into cars. The HaloLock fits into the car vents. My car, for info is a small Ford Fiesta. As I said at the start I did not expect the HaloLock to fit due to the angle of the vents but it works perfectly. By the way, I used with the phone in a MagSafe case so there was some extra weight and the unit coped without any problems. A superb product.

This is the second one of this device that I have purchased - the orginal one was excellent for a long time, but got damaged when it fell off the dashboard so I purchased what I thought would be an exact replacement. The latest one is good but not as stable as my previous one - the weight of the mobile phone frequently causes the device to dip down which is distracting and not ideal. The 'ball and socket' system is just too loose. So I am not too happy.

Great product, easy to fit and has the option of either mount on an air vent with a spring loaded clip or surface mount with 3M adhesive pad

Excellent functionality. Needs another cable than the provided though for full charging effect

ESRのケース使用ですが、MagSafe対応のモデルでは無いため、強固な接着力というわけにはいきませんでしたiPhone12 Proに於いては、問題なく接着されましたが、miniで使用するとケースの縁の僅かな土手が障害となりうまく接着しませんケースさえ変えれば問題なさそうですが、同メーカーの商品なのに上手くいかなかったので、多少残念でした商品自体は素敵だと思います

I recently purchased the ESR Wireless Car Charger, and it has exceeded my expectations in every way. The compatibility with MagSafe, especially for the HaloLock magnetic system, ensures a secure and reliable connection for my iPhone 14 Pro Max. The fast-charging capability is a game-changer, allowing me to power up my device quickly while on the go.The air vent mount design is not only convenient but also incredibly sturdy, securely holding my iPhone in place during drives. What's impressive is that it accommodates both caseless iPhones and those in cases, providing flexibility to users. The sleek black finish adds a touch of elegance to my car interior.In summary, the ESR Wireless Car Charger combines innovation, functionality, and style, making it an excellent choice for anyone in need of a reliable and efficient charging solution for their iPhone 15/14/13/12 series. Highly recommended!

I bought this product late March 2025. It securely attaches to my car's vent and has a strong magnet and thus holds my iPhone very well. Additionally, it charges as well. Pretty much a perfect product. Unfortunately, the other day I was trying to adjust the mount and the magnetic portion of the device separated from the body. I only had the product for 15 months. I contacted ESR told them what happened and sent them photos of the 2 pieces. They responded within 1 day and 2 days later they sent me a replacement. I was disappointed that the product broke but very pleased that ESR stands behind their products!

Magnetismo e Aggancio (Perfetto):Con cover magnetica funziona molto bene, solido. La necessità di una custodia esterna è stata completamente ripagata dalla comodità. Hoottenuto la funzionalità "attacca e via" tipica del MagSafe, con l'S25 Ultra che si blocca saldamente in posizione, senza bisogno di morsetti meccanici.Stabilità e Tenuta (Massima Sicurezza):Presa molto forte sulle alette dell'auto. Questo è fondamentale. I supporti per bocchetta dell'aria sono spesso criticati per la loro instabilità, ma il design di ESR (probabilmente grazie al robusto gancio/morsetto) garantisce che il supporto rimanga fisso, anche quando l'S25 Ultra, che è un telefono pesante, viene agganciato e sganciato.Ricarica Ottimizzata: Se stai utilizzando anche un alimentatore da auto adeguato (di solito un adattatore USB-C con Power Delivery e supporto PPS), è probabile che tu stia beneficiando di una ricarica wireless fino a 15W, che è la velocità massima supportata dal S25 Ultra per la ricarica wireless, offrendo un'ottima efficienza durante la navigazione GPS.