DICASAL 4 Inch Heavy Duty Stem Casters 360 Degree Swivel Thread Wheels with Metric Size M12-1.75 Screw Bolt Double Locking Brake Castor Wheel Load Capacity Upto 1200 Lbs Pack of Four

These fit perfectly on my work table. I replaced the stationary feet that came with it so that I would be able to roll it where I needed it. These roll smoothly, and when the wheels lock, they stay in place. This set is much less expensive than buying from one of the big-box home improvement stores.

Fits Kamado Big Joe Series 1. Initial performance is great. Rolls smooth and locks solid. Long term durability to be seen.

This set of four casters is exceptionally well made and comes with extra hardware for various mounting options. Each of the four caster wheels spins freely and with little noise when the brakes are off. I used this set on a bench and they work very well. The bottom of the legs of this bench were threaded for the same thread as the posts of this set. The casters threaded in easily to the legs of the table. When the caster wheel brakes are off, I can spin this bench around with minimal effort. When I put the caster wheel brakes on, the bench is solid and will not readily move.

I gave 5 stars because I like them, and with the wind blowing, the Kamado Joe moved around. Of course the brakes were not engaged. I purchased the 4" wheels, installed the locking nut upside down, washer on top of the nut. The whole unit sits almost 1 inch higher, which is fine with me. I had one wheels rubber come apart. While removing the wheels, all wheels were separating. Very nice wheels, smooth, and looks darn good with the red Kamado. The height is fine since the unit is stationary. Very happy with the purchase.

I mounted these DICASAL 4-inch casters to a hefty 200 lb cast iron welding table, and they've been phenomenal. The casters were a breeze to install, and once in place, my welding table glided over the garage floor like a charm—no scratches, no effort. The dual-locking mechanism gives me the confidence to keep the table stationary when it needs to be, yet the 360-degree swivel feature is a godsend for maneuvering in tight spaces. They roll out to the driveway without any hiccups, handling the weight of my equipment effortlessly. The build quality is superb—sturdy, stable, and the red PVC wheels add a touch of style while providing that all-important floor protection. If you're in need of a set of reliable casters that can handle serious weight and provide smooth movement, look no further. I'm thoroughly impressed with their performance and wouldn't hesitate to recommend them to anyone needing a solid mobile solution for heavy furniture or workshop gear.

Still early, but I used this for a project to add larger wheels to my RecTeq RT-700 (v2) smoker. I have the v2 with the angled legs. I can confirm these fit correctly into the v2. You un-screw the original flimsy casters and replace with these. Note that you will need to replace the rear (fixed) wheels to level your grill. I would have rated this 5 stars, but the wheel lock is a little hard to disengage with your foot/shoe. I would have liked that to be easier. Here is a list of the items I used for the v2: 12" tires w/ 5/8" Axle Borehole (https://www.amazon.com/dp/B0CNPTB53B); I wrote a review on these with more pictures and instructions for how I installed these on my v2. 5" casters w/ Metric M12-1.75 (https://www.amazon.com/dp/B08B1JZWHF) 5/8" Zync Rod (https://www.amazon.com/dp/B09T6Q7W5S) 5/8" Axle Collars (https://www.amazon.com/dp/B0B4SG3P94)

My OEM Kamado Joe wheels fell apart after around 5 years of ownership. Rather than pay the high price for OEM replacements, many threads lead me to these wheels. I bought the 4" wheel casters for my KJ Classic II. Removing the broken casters was not terribly difficult with a little bit of WD-40. Make sure you have 19 mm flat wrenches to remove these. I used my Dewalt Jack Stands and some spare lumber to lift my grill safely so I could remove the old casters. The stems on the replacement casters are a little long - several reviewers used the included nut as a spacer, but I found it a little too tall for the purpose. Instead, I went out and bought 8 washers that matched the included 4x and stacked 3 washers per caster stem. This provided a good stable install without the stem cutting into the KJ legs. The wrenches that were included with this set were very helpful to complete the install. These are an excellent replacement for the original wheels!

These are fantastic! We put them on my Kamado Joe Big Joe cart. My son in law had to break the weld on the old wheels but he had no problem installing these new wheels on the cart. They roll so smoothly. I love them!

This is a very good wheel at a very good price. I bought a workbench that came with stationary wheels but I wanted to be able to move the bench around. You can see the stationary legs on the lower shelf in the picture. I bought these wheels with a M12 thread and they fit perfectly. Bench moves around with ease and locks down solid. Liking the soft rubber also.

Remplacer des roues de 6 cm par des roues de 12,5 cm... ça roule beaucoup mieux. De plus elles sont de bonnes qualitées et ont une charge utiles de plus de 100 kg. Ca laisse une belle marge de sécurité. Donc tout est pour le mieux.

Bought these and fitted them to a motorcycle lift weighing 350kg. I have been wheeling it around my workshop for a month now and the castors are still perfect.

Solide Rollen zum Superpreis. Es sind sogar 2 Schraubenschlüssel dabei. Auch M12 Muttern und Unterlegscheiben. Prima aus China 🤗👍🏻. Meine schwere Wippsäge rollt jetzt wieder sehr gut

Great casters, seem good quality and positive locking mechanism. Delivered promptly. Didn't come with the spanner, washers or nuts, as shown in image, but that was not an issue for me - but is reflected in rating.