MG Chemicals - 8481-1 Premium Carbon Conductive Grease, 3 fl. oz, Black

After reading Guzzar’s review I bought to see if this could fix my Siemen’s circuit breakers (CB) overheating where the CB contacts onto the backplane tab. WORKED BEYOND EXPECTATION! Fixed two problem breakers that were overheating at tab contacts. Power off, clean backplane tab w fine sandpaper keeping debris out of box, thinly grease tab and new CB contacts, reinstall. I needed new CBs because old CB’s contacts arced. And it’s not the new CB, new CB in past still overheated but with this grease they run cool. One 100A breaker feeding garage was fine until I stressed it by charging newly bought electric car. With clean tabs, grease, and new CB it runs cold. Great stuff.

Using this on my electric train cars,

I use this for a connection from my truck to an inverter. The connector is exposed to the elements under the hood when the 8000 watt inverter is not hooked up to the truck. This is extremely conductive grease. When using the inverter, I often pull 3-5 minute loads of over 500 amps and this grease keeps the connection good enough that it does not get hot. It is, IMO, as good as bare metal connections, with the added ability to keep the metal connectors corrosion free. Good stuff. Kinda expensive but you use so little that a tube will likely last your lifetime, so it isn't that bad. It does wash off, you'll need to reapply about every 4-8 months. All in all, it is a good product that does what it is supposed to do and a fairly decent value

This stuff works. I had a wire connection issue for my car to battery, car would lose power and die. I tightened everything and still happened. Before i bring to mechanic to change harness, i gave this a try. Added just a few drops to places where connection issue occurred. Been driving past few days and no more connection problem! Incredible!

I've not used all of this grease, but so far it seems to be working as advertised. The only issued I have seen is that when acquired it was leaking from the end of the tube, and somehow sometimes from the cap. I cleaned it a couple of times and I have not seen this again.

Product arrived as described. Haven’t used it yet . Prompt shipping! Packaged nicely

Muy buen producto

Feel like I have all new TVs. Just carefully pry open your remotes (I used a stiff, solid, stainless paint scraper and a medium flat screwdriver to pop open plastic.), then used 70% alcohol to wipe circuit board (did not wipe buttons), cut a toothpick in half and sanded it smooth and flat, then dobbed as little of this carbon compound on each button as possible while still completely covering each button's contact point. Even that was too much compound; and had to partially reassemble to press all buttons twice, then disassemble and re-wipe only the circuit board contact surfaces. First remote took 4 or 5 re-assemblies to remove excess carbon (never wiping the rubber button contacts, only the PCB contacts) subsequent remotes still took 3 re-assemblies and wipe clean so that no buttons were activated all the time by excess carbon grease. Did all five of "bad" remotes in 3 hours while being distracted by simultaneously watching football on TV. Very happy! Now can fix my volume, channel, input, and recall buttons anytime they stop working correctly, which is usually about 12 to 18 months between remote control failures on my Sonys and Samsungs. (Got a Pioneer Theater remote control that has never failed in 8 years, go figure.)

no es un buen conductor.

As the title eludes to, this grease is messy stuff. I highly suggest wearing disposable gloves and using the dispensing tip that comes in the package with the tube of grease itself as you don't need much of this grease to thoroughly coat anything you need to use this on. I mostly use it to coat ground connection points on vehicles since this grease doesn't wash away easily and is electrically conductive, so it prevents corrosion and ensures a solid connection will be present for the forseeable future. You could use it on electrical connectors/terminals as well, but then you'll need to be very precise in your application of this grease as again, it's electrically conductive, so any stray grease could potentially bridge connections and cause much bigger issues. But as long as you keep this products attributes in mind while using it, it's a fantastic product to have around and the tube is big enough and you need so little at a time that this tube should last you for many years.

Graisse utilisée sur une antenne CB pour refaire le contact de la prise SO239 d'une Yagi. 👍

Relatively expensive, but does what it says. You only get what you pay for. This grease goes a long way too. You only need a very thin coating.

Gerade auf einem Karton einen ca. 5 cm langen Streifen angeschmiert und el. Widerstand nachgemessen. Mehrere hundert kiloOhm (!) Ein dicker Klex ca. 5mm x 5mm x 5mm hatte 2,1 kOhm