Goplus 1” Impact Wrench, Air Impact Gun with 1-1/2" & 1-5/8" Sockets, 6 Inch Extended Anvil, 1/2" NPT Air Inlet, Carrying Case, Pneumatic Impact Gun for Car Truck Tire, Max Torque Output 1900 ft

Works excellent, way cheaper than other brands, can buy multiple of these for price of a name brand one and it works great.

I don't have much experience with large impact wrenches, but this one broke loose the 2-3/4 inch nuts holding the blades on my tree cutter, factory torque was supposed to be 1800 ft/lbs. It would have cost more than the price of the tool to have some one else do the job, and would have taken longer to load the equipment on a trailer and get it to them than it took to remove the blades, sharpen them and reattach them. The name brand tools may last longer, have more torque, and a better design but good enough is alright for me and the price was right. Someone who uses these tools everyday would have better knowledge on longevity, but I think its already paid for itself, and will last as long as it gets clean air and lubrication.

Takes off any bolt known to man! Incredible torque. Plus you get your exercise in since this rascal weighs 30 lbs!

What's not to like? As a Hobbyist, surrounded by old heavy trucks, with 60+ lugs on the wheels that haven't been broke free for 60+ years, this inexpensive 1" impact wrench has its work cut out! Truly, at a buck a lug, it'll only take me two rigs to make it pay for itself (honestly, it's more like $60/lug, when there's an issue). Nice little package, decent blow-molded case, the addition of a couple of sockets cuts my costs to not have to provide them as well. Fit & finish on the final aluminum castings might be a tad rough in the bare hand, but not noticeable yet when gloved up. One odd bummer, the blow-molded case can't be closed once the D-handle is bolted up (shipped loose) to the impact wrench. Same goes for any extended hose whip that might be attached by the end user. Yes, although a hobbyist, my air supply system is up to task; 1/2 line on the impact wrench, Milton 'G' quick connects plumbed into 3/4" shop hard lines, running off an 80-gallon tank fed by an ancient 'Wayne' 2-stage cast iron pump. Don't kid yourself- you're gonna need lots of air CFM to let this impact wrench do its job as its designed.

Its been 5 years since I purchased it. Still going strong. I use it for roadservice for semi tires so its been used in many different temperature and many situation extremes. Let me tell you. This thing will outcopmete IR and Milwaukee. I would know, I took it with me and used it against the expensive shop supplied ones. I prefer mine. When you need to break free those stuck ones and don't want to waste time on the torches. I do use a thicker hydraulic oil for my gun oil tho. But was using it the other day and realized how long its been and wondered if I ever showed it some love on here. Will buy another one. *side note. Always use a 1/2 air line and fittings. 3/8 can not and will not give it the proper torque and supply. I guarantee nobody out there is using a torque wrench after to confirm. Just because it can work with a smaller 3/8 doesnt mean thats what its for. Don't kill somebody. Run the proper size stuff.

Mi esposo le da vastante uso en el camion y es muy buena

I'm running this impact on an old Craftsman 25 gallon compressor at 120 PSI. I'm using a 3/8 inch straight through bar from the compressor and 3/8 in industrial fittings at the gun. I used a 1/2 npt to 3/8 in fitting at the gun as well. So all my hose and fittings are 3/8. I work on Isuzu and NQRs so the 41 mm socket that comes with the gun was perfect! I can get five lugs off completely before the compressor has to recharge which is no big deal. This gun makes easy work of these lug nuts. When tightening lug nuts with this gun, I get three on before has to build air back up then I get the last three on and let the air build back up. Did I make the final torque pass on all the lug nuts. This inexpensive gun saved the day for me lol. Yeah it's on the heavy side but who cares. Believe me you won't be carrying it for that long because it has plenty of power even with my little 3/8 inch hose setup.

This gun will put all the big name brand guns to shame. I have used this for 2 years with mo problems. Still does a better job then all others.

Unreal hitting power

I liked the product. I used the impact wrench to take truck tires off and do my own brakes. Great price good product

Have not used yet. Looks good though

Works great