Siraya TechBlu 3D Printer Tough Resin with High Toughness Resolution Strong and Precise 3D Printing 405nm UV-Curing Rapid Resin for LCD DLP 8K 3D Printer (Clear V2, 1kg)

I've used Siraya Tech resins for a few years and they're great. The quality of the print is great! but I feel that the mechanical properties of the resin aren't quite nylon like. Maybe I'm just expecting too much?Usually at work I'll print a part/pattern and we mould and cast out multiple parts in (usually Polyurethane) resin with the properties that I want the part to have. But I'm at home in between projects at the moment and don't have the resources that I'm used to having. So I'm using the parts, I'm printing. I'm making Prop guards for my <250g cinewhoop. I wanted to redesign them to make them easier to replace, and maybe improve the noise and efficiency slightly.... anyway, after printing and curing the prints in a Form Labs Cure (for the recommended time/settings) I tested out a few of my new designs.. and eventually/ inevitably crashed. The prints snapped on relatively low impact crashes on grass.. so, I've since ordered some tenacious to add to the Blu Nylon like, and maybe the Fast resin, to improve the impact durability of the prints and make them less brittle.

I heard great things about this resin but the long exposure time and tendency to lose detail on the support side of the print is really frustrating. Definitely not the easiest resin to use,

The media could not be loaded. Nice colour, but sadly not so good at print quality unless you finish surfaces yourself on the support side. Then you can have nice pieces/parts.I have used many of resins from Siraya blu/clear and Elegoo. This resin loses print quality on the support side a lot. I've tried heating the vat/tank. The resin seems to cling to the support side and cures. The cheaper Elegoo red outperforms this resin but it is more brittle. The detail is much higher on Elegoo resin. So basically I would say this resin is just ok by itself. However the resin can be finished by hand to give you exceptional pieces. Nice colour when polished into glass effect.You need to finish the product yourself for pristine finish. See my YouTube on how to do this. (Jeffrey Henderson)

Bought this as it was advertised as clear. Tried it out with the standard exposure tests. ALL OF THEM resulted in a very yellow result. Would not recommend if you need clear transparency...

I've tried everything to get this resin to be useable, firstly it prints ok no issues at all with it but then that is where the issues start. I've tried nearly all methods of getting this resin to clean correctly. Brand new 99% IPA, dunking, scrubbing, water baths and back into IPA but it still remains with a layer of uncured resin.Curing attempts then become the next hurdle, I've had parts 0.7mm thick under 405nm UV for nearly 50 minutes and they are still not cured! I've lost all motivation and will to work with this resin again and I'd certainly not be for the price and work I've lost because of such.I've asked across numerous forums and there seems to be this trend of not being able to get it to clean.

I have two photon mono x and the capacity of the vat is 500ml each, I used a clear resin so cant see where its at properly however you can see the max line, I should be able to fill both vats to the max line but I got just over half way in terms of each vat, there is probably around 750ml in these bottles.

I have been using a variety of Siraya Techs resins for quite a while and prefer them over most of the other brands I’ve tried.They give great quality results and I’ve had no print failures at all, which in the end saves money

This resin really stinks, pleasant almond smell? No it’s horrible gets in your throat my wife can’t stand it. I printed an air filter using a 120mm hydroponics carbon filter to solve it and now get fresh air out. It still smells bad when the print is removed and washed though. A little bit creates a lot of odour.It’s very strong. I printed a small sight mount and could not break it with large pliers. It’s a very impressive resin. I found there was no audible separation with the film. Most important it was a full bottle not like other resins so consider that when price comparing. I found that ipa cleans it but not as easily as other resins. It turned my ipa white with globs floating around after just a couple of washes. It’s very gloopy and doesn’t drain off as well as other resins. Overall for those strong parts it’s great

This stuff is tough as coffin nails. I printed a mini and dropped it from 9 feet on kitchen tile and it just harmlessly bounced. Seems a bit excessive for minis unless you plan on throwing them around lol. Fantastic for practical prints.

Facil de usar, excelente acabado, piezas resistentes y precisas

I can't sing the praises of this resin enough. Not only does it print beautifully, but you can get all the details you'd ever want just by being careful with your layer exposure settings (< time = more details).You can get any amount of flexibility/hardness depending on the amount of time spent curing.5 minutes or less of curing, and it's so flexible that it's basically a nylon. 5 to 10 minutes of curing it's not nearly as flexible, it gets harder but still doesn't break easily.It took me 30 minutes of curing to get it to a point where I could snap off supports with my fingers; anything less than that, a good pair of toenail clippers will be required.Ideal print settings on a Creality HALOT MAGE (regular, not pro) are 0.25mm layer size. 1s light delay. 2 - 3s per layer with 3 to 5 bottom layers at 10 to 30s, depending on the weight of the model.At 10s, you can easily just tug firmly, and it comes right off the build plate. At 30s, I was using a metal spatula and a rubber hammer to get it off, (it still didn't break, but I did have to completely realign my print head).If you want a really cool effect, mix this 50/50 with the Sunlu "abs-like" resins in blue or red.It also mixes so well with other resins. It's my go-to resin to fix other resins. I even used this to fix the super crappy Yousu silver resin.I wish I could buy this stuff by the drum.Long story short, this is the best resin I've ever tried, and completely worth the money.*I use the AnyCubic Wash and Cure 3 for curing, but you can also cure in direct sunlight, and the properties get really interesting.

J'avais besoin d'une résine noir pour des travaux spécifique et je suis rester chez Siraya parce que j'utilise leur résine Fast qui me donne de bon résultats.Donc que dire cette version Blu, déjà elle est très solide, plus que la Fast qui est ABS like et qui s'avère être cassante en fonction des impressions, elle a cette particularité très intéressante de pouvoir être tordue sans se casser ce qui, pour mon utilisation, une bonne nouvelle. Le noir est plutôt bon, ont a quand même cette légère transparence sur les parois fines mais je pense que c'est compliqué d'avoir une résine vraiment opaque (rapport aux UVs). Niveau facilité de travail, je tourne avec une Uniformation GKTwo et si je me fournis chez Siraya c'est parce que les présets d'impression son dispo sur leur site pour mon imprimante, donc j'ai pas eu de soucis, ça s'imprime nickel, pas eu de bugs ou de prints foireux. Elle colle plus au FEP que les autres résines de la marque, mais je pourrais pas dire si c'est la résine qui fait ça ou les réglages (en vrai je fait de l'impression 3D de façon professionnel et j'ai vraiment ni le temps ni l'envie de perdre des heures à faire des tests, en l'état ça marche très bien).Au niveau des points noir (lol), elle a une forte odeur par rapport à la Fast mais toujours moins que certaines autres avec lesquelles j'ai pu travailler (mention honorable à la résine Tough de chez Zortrax qui sent la colle bien cancérigène), elle demande plus de temps de nettoyage (en règle général un seul bain dans l'IPA suffit, là j'ai dû refaire un passage dans de l'alcool propre sur la fin pour enlever les derniers résidus de gras), idem pour le curring, faut bien compté dix minutes pour que les prints ne collent plus et elle souille assez vite l'IPA (j'ai rincé 20 pièces et l'alcool est bien dégueu, a voir si ça se décante).A 46€ pour une bouteille d'1L c'est plutôt bien par rapport à d'autres marques qui font pareil pour 2x le prix, à conseillée donc pour des travaux spécifiques, pour un usage quotidien et imprimer des figurines ou ce genre de truc à mon avis c'est un peu overkill, la résine Fast est très bien pour ça (et moins cher).

Non ha nessuna delle proprietà elencate, ha solo un bel colore, per il resto è uguale alle altre resine con in più la difficoltà di stampa.