LOVEHANDLE Universal Phone Grip for Smartphones & Mini Tablets - Phone Holder for Hand - Wireless Charging Compatible - Made in The USA - Solid Black

For me, the most comfortable, dependable and necessary addition for your phone. My last Love Handle lasted 2 years on my S24 Ultra. I always use the additional clear strip, because with that, the handle ain't going nowhere. Just got a new one for my S26 Ultra. It doesn't cause issues going in and out of a pocket and is super secure, even on a heavy phone. I've tried rings and pop sockets, but the Love Handle beats them all in my book.

They are easy to grip phone with and not huge on the back. Better then a pop socket and aren't tacky. They are screechy material so be careful not to over stretch it. It's easy to install onto case. And is not bulky at all.

I bought a new case for my phone, put it on, and immediately missed my Love Handle! I found this one that matched my new case and I'm happy. This is what I'm used to and can't take selfies without it! The finger band stays put and doesn't add bulk to your phone. The elastic will stretch with use, but never stretches out too much. I rely on my Love Handle to keep my phone in my hand safely.

I bought this thinking: “Cool, maybe I’ll stop dropping my phone.” What I got: One-handed texting like a pro Zero fear of dropping it Me wondering why I didn’t buy this sooner This thing is basically a slim elastic strap that sticks to the back of your phone with strong (but removable) adhesive Translation: 👉 Slide your fingers under 👉 Phone = locked in 👉 Confidence = unlocked First use: Put it on Slipped my fingers in Immediately felt like I had a better grip on life It’s super thin too, so it doesn’t make your phone bulky. You can still: Fit it in your pocket Use it normally Pretend you’ve always had this level of control Things I love: One-handed everything (texting, scrolling, selfies) Way more secure than holding your phone like a savage Comfortable… like it was meant to be there BUT… It changes you. Now I: Walk around swinging my phone confidently Judge people gripping their phones like it’s 2010 Feel personally betrayed when I use a phone without one Unexpected side effects: Mild attachment to a piece of elastic Increased confidence for absolutely no reason Thinking “I could never go back” Final verdict: Simple, cheap, and ridiculously effective. It’s not flashy… but once you use it, your phone without it feels illegal.

It's true what they say. You don't appreciate the good things until you've been exposed to the bad. I got this because my phone case from 2021 was so slippery, you may as well slather butter all over the damn thing. It was hard plastic-like shell with geometric pattern that made the issue WORSE. I wasn't sure LoveHandle would even adhere properly, because the pattern made the back of the case both uneven and slippery. Well, adhere it did. LoveHandle outlasted the case, which broke on me a month ago. The elastic band of my LoveHandle had stretched a bit after nearly two years of usage, so I replaced LoveHandle with a metal ring-type holder, which also boasted 3M adhesive. Less a month later, the ring holder popped right off. It came with an extra adhesive, so I stuck it on and tried again. One week later, the ring holder popped right off AGAIN. I was lucky that both times were on my desk, so the phone only dropped about half a foot. Not ideal, but not enough to break my phone. But I was too nervous to entrust my phone to that thing again. I'm waiting for response from the ring holder company. But on a whim, I dug out my old LoveHandle and tried it with the extra adhesive included in the package. It turns out, even if both adhesives are 3M as advertised, what LoveHandle uses is a whole universe better than the ring holder company's choice. LoveHandle adhesive is almost like a gel or gum, and so sticky that prying it off was very difficult. The ring holder company adhesive is thinner and more foam-like, and it...pops right off. LoveHandle isn't perfect. Its design means the phone will not lie flat on any surface, and traditional phone stands don't work well with it. And the elastic band does stretch because, um, it's elastic. That's not a design flaw, but it does mean LoveHandle will have a set lifespan. I really did prefer the ring holder for its flat design and easier handling. But here's the issue: the PURPOSE of these holders is to hold your phone secure. Meaning, without coming off and dropping your phone unexpectedly. LoveHandle passes that test with flying colors. The metal ring holder...not so much. I think I'll keep using my old LoveHandle until the elastic gives out, then figure out what to do after. In the meantime, thank you, LoveHandle, for keeping my phone secure.

Update... the strap has stretched out comfortably now no longer makes my fingers feel like they're going to fall asleep and has given me the ability to hold it very easily without any discomfort at all. The material is certainly holding up and it is very secure on the back of my phone. The materials seem like they are of good quality, although the value is a little bit on the expensive side as far as I'm concerned. The strap is a little bit too tight, it actually makes my fingers go numb but I'm hoping that it stretches out a little bit. The color is what I wanted it to be and I like the design. But I do feel like it's safer than the metal ring popsocket kind of holder because I don't have a concern of breaking my finger with this one. So I guess I'm pretty satisfied

Long review. Read if you want to know about: Pixel 3 Plus, wireless charging, use with case and basic review of product. I don't ever write reviews but I'm on my 2nd phone in 4 mos. I had a popsocket and they're a good idea, but the base is wide and I have stubby fat fingers and couldn't reach my finger pr scanner and then slide down to comfortably text. I had a galaxy 9 so its kind of got a lot of real estate to cover for Carney Hands McGhee over here. I dropped my phone all the time with that thing, shattered the screen. Way too cool for a phone case so its toast. New phone is the Pixel 3 Plus. It's rose champagne colored, slim and pretty and larger than the Galaxy9. I bought a clear OtterBox Defender case because I'm smarter this time. I can't use a popsocket with this phone. It's way too big and I have garden gnome digits. I also bought the super cool fast wireless Pixel Stand charger. The flaw in the charger (vid) is that the ridge to keep the phone upright on the charger is just thick enough to hold the phone. With the case on, it just barely stays on the charger. So I scavenge Amazon for some type of THING to keep my phone attached to my little pawpaw and saw this Love Handle. I liked the look. It looked slim enough to maybe not interf with the wireless charging so I gave it a whirl. I used Scotch tape to temporarily hold it to my case so I knew where I wanted it, peeled the back off the Handle and stuck it to my case. Peel, stick, press firm for 90 seconds, let sit for 10min before use. Its perfect!! (Pic - case without phone since I'm reviewing from said phone). Love. It. Another vid you can see I'm flipping the case with the Handle all over and it just won't budge. Straight diggin' this thing. Place it on the charger, won't stay. I'm an industrious chick though so I get a hair tie and I'm just gonna buckle that little bastard in. Worked! Until it didn't. Phone charges for 30 seconds then quits. With the thickness of the case and the thickness of the Handle it just can't do it. So if you're brave enough to go caseless like I was when I was younger and braver and so so stupid in that long ago time of Winter 2018 and have the desire to charge wirelessly it will work. It will not work with a case and the handle to wirelessly charge. Sure, I could take my case on and off for charging, but I can barely remember to feed my dogs, so I don't think I'll remember to always case up every morning. But I love this Handle so much. So I think I have a hack. The thick Love Handle base on its own is no thicker than the case on its own. Tomorrow I'm going to try to remove the Handle from the case, figure out some way so cut out the section of the case where the Handle needs to be, attach the Handle to the phone, then pop my new and improved case on the phone with the Handle sitting in the new hole I cut. Yes. That's how much I love the Love Handle. I'm going to risk trashing a 50$ case for this amazing 10$ product. I'll update. Summary: Product is very functional, unobtrusive visually and comfortable to use If you used a sticker book when you were 7 or applied a postage stamp sometime in your life installation is a no brainer. I believe it will wirelessly charge if you do NOT use a case and stick directly to a naked and scared phone. If you have a case it MAY wirelessly charge if you have a very thin case, but I really doubt it. Otherwise if you're a regular plug to charge kind of person that uses a case this thing is amazing and I LOVE it. I'll update with my hack if it works or doesn't work.

Got both the large and standard size because I have large hands and wasn't sure which would fit best. The large was too big, hand slid around, so I used the standard phone size. It was easy to install and adhered well on my textured Spigen case. Even with my large hand and smaller handle, my fingers slid up and down some, but overall it felt secure and did make it easier to hold my Pixel 8Pro. To that end, it worked great. It also seems well made and sturdy. But... the handle is very thick. As a result, wireless charging on the Pixel Stand would not work. After many attempts, I'd would get it situated on the charger so that it would at least be charging in slow mode (fast charge was an absolute no-go), only to wake up to find out the phone wasn't charged because it slide off the charger. The other problem is that you can't lay the phone down flat. It wobbles significantly. Makes it impossible to use the phone when it's laying flat because it rocks back and forth. The added depth also makes it difficult to use a car mount -- the phone didn't fit completely in the bracket and the handle on the back prevents the phone from sitting back flat in the mount, it's off kilter. I was afraid the phone would fall out if I hit a pothole. I ended up removing the handle. It was relatively easy to remove. Did have to scrape some of the adhesive off, but it did come off and didn't damage the case. But that is another potential issue. If you switch between cases, you'll need a handle for each one. You can't switch the handle back and forth without completely removing and re-adhering each time and that will require new adhesive, it's not reusable. If wireless charging isn't important to you, you don't need to use your phone while laying flat or in a mount, and don't switch cases, this handle is a good choice. If these features are important, you'll need to look elsewhere. I ended up with a ribbon type handle that is thin and does have the same re-usability concern, but doesn't have the depth or wobble problems.

Love this product! It’s great that I can attach this to a case that I love! Adheres easily and it stays on! Very happy with this 🙌🏼

Ich habe den Halter direkt auf mein Handy mit Glasrückseite geklebt und es hält bisher super. Induktionsladen klappt auch einwandfrei ohne dass man lästig etwas abfummeln muss. Und endlich keine verkrampften Finger mehr!

ended up using it more than i thought i would. my phone still fits in my back pocket and i haven't dropped it in a long time

A fita que veio não grudava, tive que colocar outro adesivo. Elástico é bem desconfortável. Não recomendo. O valor cobrado por essa qualidade é bem desproporcional. Fuja!

Me llego en buenas condiciones y llego el dia indicado por la pagina, es muy util y no se despega