Replacement Key Fob Car Remote and Uncut Transponder Key Compatible with 15913415, 25839476, ID 46 (2 Pack)

The local Ace Hardware cut the keys and programmed them.

The key fobs programmed very easily with a Dorman remote programming tool. I needed the programming tool because my vehicle is 2012. The alternative is to take it to the dealer or locksmith. The programming tool plugs into the OBD2 port on the vehicle and puts it into security programming mode, then the fobs are easily programmed. Be sure to follow the instructions on the programmer. They are quite simple, but need to be followed. I only used mine once to program 3 fobs, but read that the programmer is only good for 3 activations, so I've used one of the 3. In theory I have 2 more activations available on the programmer, but likely won't need it now that I have 3 fobs. Prior to using my programmer I read something from another consumer that had plugged in the programmer before reading the instructions and wasted a couple of his programming sessions figuring out what to do. The programmer was around 100 bucks at an auto parts store but was still much less expensive than the locksmith. The whole programming of fobs and keys took easily less than 5 minutes. I probably spent about the same amount of time reading the instructions. The fobs come with battery included and seem reasonably durable. I've had them for a couple of months now.

These Fobs and keys Worked great! Buick dealer wanted $250 to program them!

Keys and fobs work good. Fobs feel very cheaply made but have held up so far.

Product was very easy to install! As one of the reviews said in here already- I took the key blanks to the local Ace Hardware who cut them for free and even helped me link the keys to the car. The remotes were extra easy to setup. The company made the instructions extra easy. I used to work at a dealership and it was spendy for just one new set of keys and fob. Now I have two for $30. Impressed.

This is a great deal, but comes a few challenges. I was able to get Lowes to cut one of my key (only because they were out of stock of the model needed) they cut the key but there's a chip inside that needs to be paired with your car to actually start the car. After a few researches I found a video with the easy step to get your key to work properly.For the remotes, you need to go to a Locksmith to have them programmed and it will cost you $50 to $60 per remote to get those to work. Or you can find a device online that will allow you to program them yourself.I now have 1 spare working keys, better than none. It may just be cheaper to go to a Locksmith or Auto part store and have them cut it, program it and at the end it will cost you the same or less!!!Think twice.

key fobs worked like factory, easy programming videos on YouTube, most key cutting shops refuse to cut keys bought elsewhere because they are chipped, ended up getting one made at local locksmith shop for 30 bucks

Got them for my 2016 GMC Acadia Denali. Unfortunately, they must be programmed by a GM dealer. Rating would be 5 stars if not for that. But, that's not the vendor's fault.