Nitro Clip-On Cup Holder for Walker, Black | Clip-On Cup Holder Attaches to Walkers and Rollators for Convenient Beverage Storage, 6 x 4 x 3.5 Inch, Black

clipped on easily, holds water bottle securely upright. Gave it only four stars on durability, because it feels the actual cup holder part might be a little fragile - but then again, maybe not. For those who posted reviews saying that it is not adjustable, that is absolutely incorrect. The cup holder ratchets left/right to the position you want, if you don't ratchet it to that position, well, it won't be where you want it. If you want to change the angle at which the cupholder (forward/backward) is tipped, you can do that as well - simply loosen the screw on the inside of the clip that attaches it to the walker, fix the angle, and re-tighten. And you do not have to pull the sides out to fit it onto the rollator; just press firmly, and it will snap onto the bar, is perfectly sized.

My wife has a Drive Nitro walker, she was excited to get this cool cup. Amazon rocks!!

Works perfectly on the Drive walker. Sturdy enough. Love it.

The only reason it's not 5 stars is because in some positions on the walker (Drive Nitro) the cup holder tilts a little. In others it can get into a fight with the walls. It is very well made though. Sturdy. Nice to have. Easily movable. Fits snug onto the walker (Drive Nitro). It will carry a glass or a coffee cup (has a handle slot). Since I first wrote the above, I have found that it is quite easy to separate the clip on the cup holder from the arm which holds the cup holder. It has come apart when I inadvertently leaned onto it when the walker was collapsed and in the car. Several times I have forgotten to take it off when folding up the walker and it has separated. When it was hooked onto the outside arm of the walker it has come apart by striking the door facing in a narrow doorway. Finally, when it's been clipped to the inside of the walker, my husband has sat down on the walker seat which means he sat on the cup holder. He also struck it pretty solidly with the tray he uses on the seat of the walker, causing it to "break". I've lost count of the number of times it has come apart. So far, I've been able to repair it and it's still working fine, although sometimes the "fix" causes it to be a little less level. Would not suggest clipping it to the inside of the walker frame of dementia patients who forget and sit down on it. Suggest hanging it on the outside of the walker frame, but being certain the walker + cup holder can make it through your doorways, or that you remove under certain conditions. It is much better to have a cup holder than have a walker patient try to carry a beverage and use the walker. (The pictures would not go into the order I wanted them to go, but I think you'll get the idea.) I would change my rating from 4-star to 3-star, but I feel it's our fault that it broke. I'm just glad it was fixable.)

This device is designed to fit the unique frame profile of the Drive Nitro rollator, which is, by itself, is a great product. This cup holder is quite a different story. It clips onto any vertical segment of the frae, staying put by friction. The holder can be moved around by simply applying some pressure to one of the arms of the clip and easing it off the frame. Once relocated, it stays put. The device is designed to allow the holder and the drink (bottle, glass, small cup) to (1) be swivelled horizontally forward, sideways, or backward into a position accessible to the user. This feature works OK. The device is also intended to allow the holder basket to swing in a roughly vertical plane so that the drink itself says vertical and therefore does not spill its contents. HOWEVER, the design of this feature is faulty - a FAIL in a pass/fail grading system. The failure occurs for a single reason - the swivel mechanism is flimsy plastic. To tighten up the rotation (I.e., to "lock" the basket into a steady position in which the cup doesn't relocate itself because of its weight), one must tighten a screw accessible from the frame side of the device. It's impossible to tighten it enough to prevent rotation, so the full drink rotates and cfalls out of the holders basket and dumps on the ground. Attempts by me to solve the issue by adding a lock-washer led to my previous use of the word "flimsy.". Tightening the screw to clench the lock-washer resulted in the screw-head pulling all the way through the clip. That was that for the entire assembly. And all of this destruction was accomplished solely with common hand tools. In summary, this device would have gotten FOUR STARS if the mechanism hadn't let me down. And it would have received FIVE STARS if the basket was a bit larger in diameter. But I still love the my Drive Nitro rollator, a device I've previously reviewed. UPDATE. I noticed another comment on this product citing the same criticisms I had. I finally decided to enact the "kill-or-cure" approach. I disassembled (hex key tool) the frame clip from the cup basket, applied a thin coating of Gorilla Glue to both of the mating surfaces, and re-assembled the two parts. The clamping force of the screw held the surfaces in close contact while the glue dried. HINT: get a good idea what angle you want the basket to be re: the ground, because once the glue sets, that's the angle it will be at unless it breaks or goes into a recycling bin. It solved my problem with it, but as the product ships, it's still a ONE STAR device.

The only issue is that it’s hard to get it installed. I thought I might break it before it would snap onto the frame but it does work. I guess the tight fit means it will stay in place. Once installed it works great. If the cup holder seems loose, there’s a 4mm hex screw accessible from the bottom that may need to be tightened. Update: After about 9 months the screw that attaches the clip pulled through the plastic and the cup holder fell off. I ordered another one but the clip on the new one is noticeably narrower than the old one. I was able to install the old one fine but I cannot get the new one to snap on. Not sure if the new one is just faulty or if they modified the design.

The cup holder is great, for a time. Easy to install but it does need to be tightened occasionally and the longer it lasts, the more frequently it needs to be tightened. It fits the Drive brand walkers well and no spilling the drinks. The downside is that they do not last long. I order one in July 2021 then another laste August 2021. Now May 2022 and I am having to order yet another simply because as the screw that holds it to the walker loosens, it becomes more difficult to tighten and eventually breaks.

Finally a cup holder for a Nitro! I've been having to jury rig universal cup holders on my Nitro for years....which leads to me inevitably losing a cup or water bottle on the regular as they just don't stick to a Nitro frame well. Which is kind of dangerous because then I'm trying to pick up something that I have to let go of my walker to grab. Bottom line, if you have a Nitro you need this cup holder. No other fits right. It was fairly easy to clip on and I love the fact that I can rotate it which makes it easier to get through doorways with a drink. I've gotten it to hold a variety of mugs, cups and water bottles. If Drive were to improve this then they need to look into making it able to hold a standard hospital mug. About the widest thing I can fit in it is a 12 oz ball jar. Anything wider is a no go so my hospital mugs are out. So are my wider coffee cups and tea cups. That is my only con with cup holder.

A great little cup holder for the Drive Nitro. It rotates to help with transport in the car.

La idea es muy útil pero el mío salió defectuoso. Se vence y hace que las bebidas se derramen.

I've been using this really love this cup holder for more than a month now and really love it. I have problems with dry mouth so am always needing my water bottle. In fact, many people I've run into have noticed it and made positivee comments. The four stars for installation is because it requires someone with strength to put it on (which is often not the person using the walker). The four stars for sturdiness has to do with the (desirable) movent in the holder. The screw on the backside became loose (easily fixed with a screwdriver) and wouldn't stay level. I'd recommend this to anyone who appreciates having a water bottle in tow.

The holder fits the Nitro perfectly, without affecting the hand grips. Been reliable holding full cups of drink. Arrived promptly.

This perfect item. This match to the brand of the item that what Im looking for. It’s great!