Buy anything from 5,000+ international stores. One checkout price. No surprise fees. Join 2M+ shoppers on Desertcart.
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Tunisia.
🔧 Plug into Reliability!
The ENERLITES Straight Blade Angle Plug is a robust replacement male plug designed for high-performance applications. With a NEMA 6-30/50P configuration, it supports 50 Amps at 250VAC, making it ideal for both residential and industrial use. Its hardened plastic construction and solid brass blades ensure durability and excellent conductivity, while the UL listing and 1-year warranty provide added assurance.
| ASIN | B08GY447RJ |
| Amperage | 50 Amps |
| Best Sellers Rank | #20,826 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #43 in Electric Plugs |
| Brand | ENERLITES |
| Brand Name | ENERLITES |
| Color | Black |
| Customer Reviews | 4.7 out of 5 stars 528 Reviews |
| Included Components | 65351-BK |
| Item Dimensions D x W x H | 1.18"D x 1.77"W x 3.41"H |
| Item Type Name | 65351-BK |
| Manufacturer | ENERLITES |
| Material | Nylon |
| Material Type | Nylon |
| Model | 65351-BK |
| Number Of Poles | 2 |
| Number Of Wires | 3 |
| Number of Poles | 2 |
| Part Number | 65351-BK |
| Plug Type | Type B |
| Product Dimensions | 1.18"D x 1.77"W x 3.41"H |
| Specification Met | NEMA |
| UPC | 883951483814 |
| Unit Count | 1.0 Count |
| Voltage | 250 Volts |
J**S
Good quality product.
This thing works really well, and isn't bad as far as attaching to the end of a cable.
K**N
Installation in the wrong order can be VERY difficult
Here's what I did that makes installation much easier 1. Completely remove all 4 Back screws and 2 Front cable clamp screws 2. strip wires, open prong clamps, insert wires and tighten pin clamps 3. Install cable clamp but barely insert the screws. This is important. If you clamp the cable down at this point it will be VERY difficult to install the back cover 4. push the pins toward the inside of the cover so that they have some wiggle room. You need to be able to wiggle the pins around in order to line up the brass ends to fit into the plastic holes of the back cover. once you get all the pins aligned to the holes you can push the two body shells together 4. tighten the 4 front screws and then the 2 cable clamp screws. The back cover alignment holes keep the pins sturdy. This seems to be a sturdy connector and the price was good.
A**M
good product
good product
S**M
No problems with my use
In service 4 months. Use to make a 220 VAC 50 A extension cord for my welding machine. Seems rugged and durable enough for my use, I do not plug and unplug it that often.
H**A
Amazon always has it
Great I order a heater and didn’t have to the right plug. This plug was just the right fit. Easy and good quality.
N**N
Great
Good quality and sturdy
C**E
Good for Welder Outlet Wiring
Wiring a 10/2 wire to the prongs went fairly easy with a tight screw down fit. Matching the two halves together was a bear to accomplish because of male and female mating pins in the housings must lock together before you can tighten the unit halves together. The wire prongs are practically impossible to set in alignment so the halves can be screwed together. My recommendation is plug the male half into a powered-off female receptacle first, which aligns all of the wired prongs, then it is easy to place the other half in alignment and screw everything together for a nice tight fit.
S**A
Top quality for the money.
Exactly what I needed. Seems to be great quality and not chintzy. It does everything I needed it to do so I can run my welder.
J**A
Excelente
Excelente alternativa para conexiones de estufas eléctricas, recuerden utilizar cable de calibre 8 para evitar accidentes
Trustpilot
1 month ago
2 months ago