VIVO Hex Monitor Desk Mount for 17 to 27 inch Screens, STAND-V006F

I went beyond the recommended screen size for this stand and it's held up great despite ignoring recommendations in description. I'm using a 34" curved acer center screen a 24" on either side of it, and a 22" on top row. Sadly I could make use of the last two slots as my 2070 doesn't support the two additional monitors. But it makes a nice headset holder haha. If it has a vesa mount, you can mount it. The downside to using it this way is a couple of things. 34" is too big physically left to right on this 21:9 monitor and the curve causes it not to sit quite right as the two side monitors end up being behind the center curved monitor. If there was more of a curve in the bar on the stand it would produce more amiable results with a curved 21:9 monitor. I think it's more suited to a 32" monitor in center and a non-curve design. to avoid the appearance of overlap. What I can say is this stand is super stable. No monitor shake with just the built in base despite exceeding the manufacturer specs for monitor size. This is my first monitor stand, and I got it based on recommendations from another coder I work with and I haven't felt a reason to use anything else after 13 months of use so far. With that said, if you follow the recommended sizes by the manufacturer then I have no doubt that you'll get a product as described that is sturdy, functional, and likely going to remain in your office for a long while.

The quality and composition of this stand has been perfected, IMO. It comes with all the pieces to fit just about any size monitors in just about any configuration and the parts are heavy duty. Installation isn't quick but it's not hard and the instructions are very clear. The only tool I needed, which wasn't included, was a screwdriver for attaching the monitor mounts. Only downside is the little, plastic wire holders on the back side, they fall out easily for me. I just used some Velcro wrap and the problem was solved.

I far prefer this to my previous Monoprice mounts. This seems surprisingly well made. Yeah, it's obviously Chinese. But the manual makes a good effort, and I didn't have any problems understanding how I was supposed to put the parts together. Everything came nicely individually packaged, and there's virtually no wobble in any components. People complain about the side monitors bending downwards. I don't see it, but even if I did, this specifically includes a trimming screw on each ball joint to move the monitors up or down a centimeter or so. It's also easy to take the monitors off (you don't need to bolt them to the frame, as they each hang on a set of "hooks". You can bolt them down for more security. I would have preferred the curve of the back bars to be more aggressive, but it's not a big deal. Overall? The best way to do 6 monitors, in my opinion.

I was speechless when I saw the box on the front porch. I had read all the specs, but somehow missed the weight of 28.6 lbs. This is a serious chunk of metal. I was very impressed by the heft and construction quality in this monitor stand. I purchased this to hold three ASUS 24" 1080 monitors, and to be able to add three more for trade shows and events. There is no doubt that this thing will securely hold all six monitors. Opening the box, the first thing that I noticed is that there are alot of screws, however the assembly time took under a half hour. The instructions were simple and mostly clear. The real time investment is positioning your monitors with the proper tilt and alignment that you want. I do agree with the other reviewer who said that the arms could use a bit more curvature. It's taken some time, but I finally am happy with the placement of the monitors. I highly recommend this stand.

Good stand for the money. I am using this stand for my current NVidia Surround 3 ASUS VG248QE 24-inch LED-lit 144Hz monitor landscape 3x1 set up, eventually going up to a 6 monitor 3x2 set up. The instructions to assemble can be a little confusing at first but once you make heads from tails it is ok. It took about 30 minutes to put together. I like the the feature where once built you can easily adjust (slide , tilt, swivel, pivot) the monitors and they can be easily taken off. This is a free standing mount so its great for any type of desk. It also comes with a bolt mount if you want even more sturdiness. My only criticism is the outside monitors sag slightly below the center monitor, so in order to get perfect alignment for 3 monitors you will have to do some work with bezel correction and physical movement. This is what took the most amount of time. I'm also concerned if this will compound the effect when I move to a six monitor 3x2 set up, I will update at a later time. I am using 3 24 ' ASUS VG248QE monitors but it seems like it can accommodate 27' monitors as well (will be pushing it to the limit though as mounts to stand will probably be almost at end of bar) . If you are looking to debezel your monitors it definitely will fit the 27' monitors. Final last positive, if you are looking to do a portrait set up this stand will also work great as it has a full 180 pivot feature. PROS Great value for the price Screens Easily Adjusted and taken off Slide , tilt, swivel, full 180 pivot for Portrait set up Great for 24' or 27' monitors Free Standing or bolt mount Free standing base is sturdy/heavy duty CONS Instructions can be confusing at first Side monitors sag slightly below center monitor Takes time to align monitors correctly

It's sturdy and holds 6 24" monitors easily. It was also simple to assemble. Reason for the -2 stars is the lack of adjustment on each monitor. Even adjusting them for almost an hr, they don't remotely line up. If you're particular like I am, and want them perfectly lined up, don't waste your money. If I could return it, I would but, unfortunately, I'm past the return window...

I was surprised it has held together without sagging. It does the job well

Game changer for our av setup at our church.

So far it's been great. Assembly was straight forward. It goes together well. Everything fits and is exactly as described on the website (purchase details). I actually had to wait for my desk to be made and delivered which is why this review is dated beyond the purchased time. Mental note for those making a 6 monitor setup! The 4 outer wings slide inwards and the 2 middle ones are hook on. The design is fine. Just remember gravity kicks in when placing the monitors on those bow arms. Be sure to install a lower level monitor first; slide it to the middle so it balances. Then slide on the other, lower level monitor. Try and get bought monitors equal from the middle for balance and go outwards until you can hook in the lower, middle monitor. Secure the middle lower monitor. Secure the lower left and right monitors in their locations. Do the same on the top as mentioned above. I also purchased a 2 pack of black Velcro wire ties to help the cable management out. Product is well worth it. Many friends and coworkers come over and see the layout and a few have made their purchased of this type, from this vendor. Mainly they purchased 3 monitor systems and a few actually purchased the 2 monitor systems where 1 is low and 1 is above (vertical systems). the idea behind this comment area is simply that, it sells itself. The photos are neat but does not do it justice once you see it setup in front of you. Vendor was great. Process payment and shipped quick. I do not recall there being nay big delays. I do recall it arriving sooner than I expected. I would recommend this vendor for any purchase.

Well made and easy to assemble. Thought I might have to secure it since I have kids, but the base is very heavy and its very stable overall so its not a concern. I am using it for 3 monitors right now (one bottom middle and two on the top row) and plan to buy more later. Using LG ultra wide 29inch in the middle and there is still room for two 21.5 inch HD monitors (Benq GW2270) on the sides of it on the same row if I want.

This product is very well-made and has a good design. Price is reasonable and does what it is supposed to. The only drawback is that you might need to secure it to the table using the included bold if the monitors on the stands are not places symmetrically.

Solid. Sturdy. Fits 6 x 27 no problem.

Awesome, Awesome and Awesome! My husband loves it.