Worth Garden 20ft Pre-Rusted Cor-Ten Steel Landscape Edging – Heavy Duty Metal Garden Edging Border, 40" L x 6-Pack 5.5" H Panels, No-Dig Hammer-in Lawn & Yard Edging with 7 Clamps & Gloves

I wanted something sturdy and that I could hammer down right up against the sidewalk as I have a corner lot. I trimmed my clusia to start growing like trees and wanted to clean up sidewalk and not have dirt and runoff from rain. I like the rusted look and definitely heavy duty steel material. Comes messy in a box because of all the rust, but that’s to be expected. Wear gloves when working with it. Easy to install and looks great.

Had some very uneven makeshift steps on our property. Opted to remove them and make a footpath with crushed stone. This landscaping edging was perfect to keep most of the stones in place and separate the garden beds. Gives a more natural and weathered look then some alternatives and it has held up well over the last 7 months. Needed two sets for my project. Installation was in line with expectations. Rocks, roots and other obstacles needed to be cleared first. Teeth went in easier and deeper in some spots than others. Adjusted for curves fairly easily. Lining up the sections and clips on an incline called for a bit of trial and error. Happy with the end result and price was reasonable!

They are an excellent product. Easy to install (although if there is something is blocking an area so it can't get pressed into the soil you will need to do some work to adjust it. Otherwise it's straight and easy to mold into the shape you need.

This stuff is heavy duty and looks fantastic. Very happy with the end result, and it was easier to install than other steel edging. But it’s expensive and still requires a lot of elbow grease. I installed by myself and used a small sledge to pound into place. Then watered to soften up the ground a little and drove it in further once I had the landscape fabric and pea gravel in place.

Pretty good, same quality as the other US brand, but these come pre-rusted and are much cheaper. It is difficult to get sharp bends for the average homeowner so keep that in mind.

The 14 gauge steel was perfect for my purposes. I replaced a flower bed border of cheap vinyl. The hardest part was bending two sections to form square corners. I used an angle grinder to score the back of the piece where I wanted to make the corner. This worked well and looks good. The other thing I liked was the length of the steel sections. 40 inches made the install very easy and the border clips were also well designed. I would recommend this product for most smaller landscape projects.

Really nice edging; super durable, and can be formed into curves with a bit of work. Lay out your area to be edged and use thick steel posts to help shape the edging, then carefully hammer it in, level it, and use the included metal stakes to fix in the ground. Keep in mind that if you have deep areas you should get the 8" version- 3" of the 8" is the spiked part that gets hammered in, leaving roughly 5" as your actual divider or edging. This stuff is hard steel so probably not recommended where kids are playing or in high traffic areas.You can hold problematic joints with a clamp and then fix them with the metal stakes (see picture). I used a 6" product about 3 years ago for a decomposed granite path and it's held up really well.NOTE: if you are doing a lot of shaping/bending you will need additional stakes - the package does not have enough for anything but joining 2 edges where they meet.

1st off love this worth corten edging. I've bought quite a bit of corten (spent nearly $1k on some real crappy stuff that hasn't lasted 6 months). This is my favorite brand. I live on Florida sand so had little trouble installing w a rubber mallet banging on a small wood board. The gauge is heavy enough to last but 1 tenacious person whose adamant abt curves can bend the stuff nicely. I'm really pleased. The edging has been installed for for 2 years & going strong around a bed of huge blue agaves.

This was exactly what I was looking for to line a little dug our garden bed, and took maybe 20 minutes to install with a hammer! Very happy with the purchase.Only note: if your edge is very curved, you might have trouble bending the product. My garde. Bed has a slight curve and it took a bit of force to get the material to bend. Wouldn’t recommend for making a circular perimeter.

Great product. Sturdy and easy to install.

I have ordered three packs so far and am very pleased with the product. It is easy to place and looks good. I would recommend them for anyone wanting edgings

For a few pieces of rusted metal, the price is pretty hard to justify. But it does look great, and is very easy to install.

Easy to bend and very happy with the look. I used it for a garden edge and path edge.