Signature Design by Ashley Armless Accent Chair, Ivory & Blue Floral | Compact profile for small spaces, 100% polyester upholstery, Sturdy black-finished wood legs, Triptis Series

I highly recommend this chair. The assembly was very easy. I did enlist some help for putting the back on. My son-in-law helped me but I'm a 60 yr old woman whose muscles have seen stronger days. The comfort sitting in this chair is amazing. It is low but my son-in-law at 6'4" loved it too. It's sturdy and decorative. You just couldn't ask it to be better. I am so happy I chose it. I read some older reviews about difficulty assembling and things not being level..ie legs were uneven and different bolts weren't marked. Ashley company must have made changes. All bolts are the same size and the needed allen wrench is included. You do have to pay a little attention to where the legs go but 1 and 2 are numbered on the legs and the chair. The rest is self explanatory. I attached all the legs first and tightened them then added the back. Simple.

I love these chairs. They were easy to assemble and are very sturdy. Matches my living room decor perfectly. Fabric is nice and thick. Great quality.

I had been searching all over for a small and affordable accent chair for my family room. I chose this chair (Honally in floral) because it looked beautiful in the photos, it matched my decor really well, and the price was one of the lowest that I’d seen anywhere. Shipping was super fast; it was here in 3 days which was sooner than the delivery date I was given. Assembly was easy enough considering that I had never assembled anything like this before; I usually leave that stuff to my husband, but i was in a hurry to put this chair up because it’s so pretty and i wanted to complete my family room. All of the materials were included in the box for assembly (nothing was missing) except one of the chair legs was cracked. I used some wood glue to fix it so i hope that it holds up and won’t affect the sturdiness of the chair. This chair won’t get used very often so it should be fine. I was pleased that the seat of the chair is firm yet comfortable. This chair would be pretty much perfect if it wasn’t for the crinkly noise that it makes when you lean back in the chair. The back of the chair is filled with some kind of plastic wrapping or something and it makes a super annoying sound when you lean against it. I did buy this chair for its looks, however, and it won’t really be used for sitting unless we have guests over. I purchased this chair with a gift card... I think if I had paid for it with my own money, I would be much more irritated with the fact that it makes an obnoxious crinkly sound and also came with a cracked leg. Since i didn’t spend my own money on this chair and it is mostly for decorative purposes, I am overall pleased with this purchase. *Side-note: The tag that came on the chair said Roundhill Furniture, not Ashley.

I couldn't decide if I should rate this 4 or 5 stars because it's not the best chair in the world but it's also the cheapest chair around. Given the pricing of this chair compared to others I felt it merited the 5th star because you shouldn't expect the highest quality for the price. That said, it's actually a very nice chair. The colors are beautiful and it's sturdy. It does sit low but it's comfortable and I use it as a guest office chair and have so many comments on how pretty people think it is. When you look at a lot of accent chairs to get a sense of the pricing this really is a great deal. There is a bit of bleed through on the colors which isn't noticeable unless you're looking closely but that is where I would say the main difference lies in a splurge chair verses the budget chair.

The chair arrived yesterday and looks nice enough when assembled--just as in the picture on the website. Have no experience as to wear or sturdiness, so I'm basing the review on initial observations.The problem is that the assembly process turned out to be difficult. Theoretically this involved putting in 12 bolts though pre-drilled holes (2 for each leg) and four more to connect the back to the seat, using a provided Alan wrench. In practice it was difficult. Aligning the holes in the legs and back with the metal sleeves where you could screw in the bolts was a little tricky, but manageable. But then screwing down the bolts was time-consuming and tedious, because most of the holes were close to a barrier, so you kept having to remove and re-set the Alan wrench every half turn or so, and there were about 20 turns per bolt. A ratchet wrench was really needed and it would have saved a lot of time if they had included one of those.But that was only the beginning. The instructions say that you shouldn't screw down the bolts for the legs completely until the chair is assembled and you can set it on the floor and adjust the height of the legs so that the chair its level on the ground. This makes sense, except for two things: First, the legs have virtually no play since the bolts holding them are going through a hole, so it's impossible to move them up or down more than 1/8", if that. But, second, and worse, you can't screw down the back legs at all after the chair is assembled because they are part of the back assembly, and once you screw the back to the seat, you can't reach the bolts to tighten them. So you pretty much have to batten down the back legs before you assemble the chair, which is what I did.When I got done and put the chair on the ground, it looked like the front left leg was about half an inch short. I tried adjusting it as much as I could, but there was very little play. Do as I will, either the left front leg was too short or the front right leg was too long.I worked on it for a couple of hours and what I finally had to do is to take off the front right leg and drill out the holes to make them into a slot, so that leg could move up and down. This worked, and it had the added benefit that the chair seat now rested on the shoulder provided by the leg, whereas previously there was a gap. However, the left leg still has a gap. It's hard to explain this, so I'm including pictures. The one without the gap is the one I adjusted. Prior to my adjustment, it had a gap even bigger than you see on the other one.This is not an expensive chair so I can't complain too much about the fact that everything isn't flush. But they really could improve the product if they actually allowed some play in the legs so they could be adjusted up or down for levelling--of if they cut them more precisely so this wouldn't be necessary. A ratchet wrench--even a very cheap one--would also be very helpful.

A few years ago I purchased 2 of these for my office. I didn’t have high hopes but the price was good. When I changed offices, the one thing I wanted to take with me was those chairs. Everyone in the office wanted those chairs. The solution, I bought another one on my own. The reviews are right. They are low to the ground, they aren’t plush or squishy comfortable but they are really good to sit in to brainstorm. When you want something besides a desk chair or you want to sit cross legged. Everyone in our office was drawn to them. I have no explanation but they are strangely comfortable.

The chair is super cute. Colors are perfect for where I want to put it. The legs on this chair are really short, about 2-3 inches shorter than my couch. I was very concerned about this but decided to keep it anyway. It looks really cute in my office and surprisingly everyone that has sat on it said it was very comfortable. It’s a very firm chair so you don’t sink down in it and then have trouble getting up. So all in all I love the chair. But just beware that it’s very light weight (not a problem for me) and very short. But it does seem to work well.

Excellent purchase

Chair was made in Vietnam. Took over a month to be delivered via US & Canada. Very sloppy, pathetic workmanship. Seam stitching on seat arrived unravelled in a # of places. 2 sets of bolt holes on the chair seat & back did not line up. Allan wrench provided to install bolts & bolt heads got chewed up when they wouldn't line up with the holes. Spent frustrating hours struggling to get this piece of junk put together. Would dearly love to return this chair but it's just too much trouble. Would never buy this Ashley line again.

Trēs joli

I bought this chair as a discounted item, probably returned because the colour is not the same as the picture online. To me it doesn't matter because I like this colour, it's more teal, sage green, black & gray. Very comfortable, beautiful quality fabric, would go in modern or mid-century modern style home. I love this chair for doing needlework because it has no arms to get in the way. Don't be afraid to buy discounted furniture on Amazon, this chair was in excellent, new condition.

It was easy to put together. The color is beautiful. The quality is great !

the colours are darker and more flashy then the picture