Hot and Cold Bidet Attachment for Toilet, Warm Water Bidet

The price was great. It works great. I thought it would take a few seconds for warm water, but it's the perfect temperature right away. Highly recommend

Bought this for my parents. Luckily their bathroom setting allow us to install the warm water. It is a life saver for them, especially my mom just had a surgery and unable to take shower everyday. This helps so much. Also, it designed to be very easy to install. Highly recommended if your bathroom setting allow you connect warm water.

I absolutely love this, they need to work on the angle and length of the spout a lil but it’s a very refreshing feeling to be shower clean all day. Also, the trick is to run the hot water in the sink until it’s warm before you use it first, that way you don’t get an attic blast in your brown star.

First I will provide some simple installation instructions: 1.) Remove the toilet seat by lifting the screw cover caps on the top behind the seat when the lid is closed. 2.) Adjust the slidable pieces of plastic on the bidet system in order to line up the holes of the bidet system with the holes in the toilet. 3.) Place the toilet seat on top of the bidet system and then put the screws through both and tighten it back down. Might need to hold a nut on the bottom side of the toilet for the screws to thread into depending on your setup. 4.) Turn off the cold water feed to your toilet. Should be located near the floor on the wall on the bottom left or right side of your toilet. You will see a knob looking thing that will tell you which direction to turn it on the front of the knob to close. 5.) Remove the lid of the toilet tank on the back and hold down the flush handle until all of the water in the tank is below the drain line and no more water is going into the bowl. You should not hear water or see water refilling the back tank of the toilet if you turned off the water supply correctly. 6.) Get a bucket, place it under the connection, and unscrew the connection between the water line going from the wall to the bottom side of the tank of your toilet. Screw the white cold water couple adapter onto the tank and then thread the water line from the wall onto the other side of this piece. Screw the connection for the cold water line onto the small thread connection sticking out from the T connector. 7.) Connect the other end of the cold water line onto the cold water connection side on the bottom side of the control panel for the bidet. They have labels next to them, however it should be the right most connection when looking at the control panel from the front when it is sitting on the toilet. 8.) Decide whether you want the hot water connection hooked up. If you don't, then make sure to thread in the dummy plug into the hot water supply side on the bottom side of the control panel. Will be the left most thread when looking at it from the front. Turn the cold water supply line back on and you are all finished. Make sure none of the fittings are leaking and you are ready to go. 9.) If you want the hot water connection hooked up, then you need to go under the sink cabinet in your bathroom. 10.) Locate which handle or line is hot water and turn this water line off at the wall just like you did for the cold water feed for the toilet tank. 11.) Once this is done, grab the bucket again and place it under the connector that attached to the line coming out of the wall. Unthread this connection and place the side of the hot water line with a T connector onto the line coming out of the wall (shown in the pictures above). 12.) Thread the hot water line for the sink on the other side of this T connector and then either fish the hot water line out of the back of the cabinet and along the wall if possible or drill a hole in the side of the vanity to get the hot water line over to your toilet. 13.) Connect the hot water line to the left most connection on the bottom side of the bidet control panel. You now have hooked up the hot water line. 14.) Open both the hot water line feed coming out of the wall and the cold water feed for the toilet. The toilet tank should begin to fill up and the hot water should be working on your faucet. Check the connections for any leaks and tighten/repeat the steps above as necessary until no water is dripping down from the connections. 15.) Your bidet is ready to use! Review: Excellent bidet system. It feels a little on the cheaper side, however I cannot beat it for the price especially since it included temperature control for that price. I took a star off for the way the adjustable system works on the bidet. While it does still fit onto the toilet I have, it does not fit perfectly. The nozzle is resting up against the rim of the bowl of the toilet. The bidet adjustment slots will not let the system move forward any more, so it just cannot got all the way back. It goes the majority of the way back, but not quite all the way. Other than that, the product has worked perfectly for the past 2-3 weeks that I have used it for. Definitely cuts down on the toilet paper usage! Slight oversight on my part: The only thing that I am a little dissapointed and wanted to let everyone know about is something that is 100% my fault for not thinking about when ordering this product over some of the other ones out there. I decided to go with this one since it had the temperature control feature. I thought this would be amazing since I didn't particulary like the idea of having cold water shot straight at my sensitive parts early in the morning. I thought that by just having it always on warm it would save some of the uncomfort that comes with this type of product. The one thing I forgot to think about is that it takes a little bit of time for the hot water to get to the sink in this bathroom. This means that in the morning, I would have to normally wash my hands with cold water in the morning since the hot water would not be coming through the faucet for a little bit. The same principle applies here. Most of the time the water still comes out cold from the bidet system since the hot water has not made its way to the bathroom yet. This means that the bidet is still just always cold even when the dial is set to always warm. I have got used to is, but this is something that I wish I would have thought about before going out of my way to find one that specifically had temperature controls on it. Still do not regret my purchase though.

Love this. I bought it for the heat option and its definitely worth it. You can adjust the heat level so it doesn't scald you. Great product

I had been contemplating purchasing one of these products since COVID, so glad that I waited. Since then, my bathroom has been renovated and I had more time to consider which options I wanted. This fits the bill!! The hardest part honestly was having to drill a hole in my new vanity cabinet for the hot water connection. It was a seamless process and I love the hot water feature!! It doesn't take up much space, which was another concern and it's very simplistic. Love it!!

I bought two of these hot and cold the day attachments. I returned one of them before I even opened it because I realized that the hot hookup was not in a convenient spot to attach to the the day. Definitely make sure you determine that before purchasing one that offers hot is an option as it's cheaper to buy one that is only cold water if that is the only option you have. That being said, I did keep one that I was able to hook up to the hot water line. Everything went fine with hooking up the cold water line no drips or anything. When it came to the hot water hook up, there was leaks and dripping immediately. We turned off the water and tried to determine what the issue was use plumbers tape and kept trying to figure out how to tighten it. My husband and I are both handy people and have done multiple projects at home. We're not contractor level or even repairman level but this was definitely within our wheelhouse and probably most people would be able to do this with no issue. It might just take a little longer for some people than others depending on your level of experience with do-it-yourself projects. We had to hire a repair man to come over and determine that the issue was not our skill level but the rubber ring gasket inside of the piece that twists onto the water line was not smooth and seated correctly. I have attached a picture showing you what the rubber gasket ring looks like. If you haven't seen one you may think that this is okay but the little rough edges cause gaps which allow for a constant leak. This was a brand new setup and this is a pretty significant imperfection because it cost us $75 to figure this out. He was able to take the gasket out of the cap for plugging off the hot water if you weren't going to be using that option. He did let us know that this has been an issue for other products that folks have ordered that require being hooked up to your water line. Be sure you know what the quality of the product is that you're buying whether it's a bidet or something else overseas. Luckily the other gasket was smooth and sat perfectly fine in the cap otherwise we may have had issues trying to find one this size at a hardware store. I don't think this is only an issue for this brand so whatever brand you go with the first thing I would do is pull the little rubber gasket out and see if it's smooth and sets well in the cap. The bidet itself works perfectly fine, the water pressure is fine and it's easy to understand how to use if you've never had of a day before.

Used with TP

I’ve already installed two smart toilet seats in the bathrooms connected to my bedroom at home and have been considering whether to install one in the first-floor bathroom as well. Installing a smart toilet seat in the bathroom near the living room might be costly and potentially underused—until I saw the **Bidet Attachment for Toilet (Hot and Cold)**, which I believe is the best solution. This bidet attachment can connect to both hot and cold water pipes, allowing you to adjust the water temperature for maximum comfort. If you don’t have a hot water pipe, it also includes accessories to seal the hot water connection. During use, both the water spray position and intensity are adjustable, with user-friendly controls. Additionally, it features a **360-degree nozzle cleaning function**, ensuring hygiene and cleanliness. I’m very satisfied with this choice—it’s fully functional, cost-effective, easy to operate, and simple to install (DIY installation is straightforward).

One star because I am unable to rate the product. I could not get it installed in Australia.

I can’t get the hoses to fit anywhere they should as my bathroom seems like ‘jack’ built it but that’s not the bidets fault. I’m hoping to get some advice from a plumber and be able to adapt it somehow/have it fitted. The seller was very helpful and replied straight away to my queries, they have issued a refund which I’m very grateful for and were so apologetic when it’s not their fault my bathroom is fitted in such a way that nothing is accessible. The bidet looks great and I can’t wait to be able to use it. I highly recommend it as I’m sure most people have a normal bathroom and can get round the problems I ran into, I did feed water through it by attaching it to the end of my shower hose and holding it in place with my thumb over the open water hole and adding pressure to see if it works and it does work well so again I do recommend the bidet.

excellent product. Works well

It is a really good bidet so far. It just arrived yesterday. I have installed it myself. I had to drill a whole on the side of the "under the sink cabinet" in order to get to the hot water just like on the picture. I think that drilling took me more time than the rest of the installation. It works very well. I like this type of bidet because there are no bidet that includes the seat and has a kids seat as well there. Like you can find a toilet seat with a kid seat together. But you can't find bidet with the kid seat included there. Since we got a new seat with kid seat attachment recently, I wanted a bidet without a seat but with as much as possibly other sort of benefits. I do think this one could have benefited from having extra things such as blow dryer and light. The installation is easy to do. Only another suggestion would be to show on the instructions where those washers suppose to go. I had to sort of try and see if it makes sense anywhere else, but I figured it out on my own eventually and placed them at the connections to the bidet itself. It is very easy to use and I am really happy with it.