RemZzzs Minimal Contact Cpap Mask Liners (6C-AVK) - Reduce Noisy Air Leaks and Painful Blisters - Cpap Supplies and Accessories - Compatible with Fisher Paykel and Hans Rudolph

Cut down on leakage a ton, and for the first time ever I didn't feel any moisture on my face after using one of these liners all night. I wasn't expecting it to affect air leaks, as I don't have a ton, but it was extremely effective and I had an even better night's sleep than I usually do with my cpap. The 6C-AVK size fit my ResMed AirTouch F30i (small size mask) well, but it is just a floppy piece of fabric that doesn't stay on super well if you need to remove your mask to get up, or readjust the mask. The softness is really nice, there is no chemical-y smell as seems standard with a lot of "disposable" fabric, and it definitely seems effective in helping alleviate some minor irritation I get with just the silicone mask, in areas where moisture seems to accumulate. This works a lot better than barrier film that you apply to your face, at least in my experience. My one gripe is that these are disposable; I wish this company would make an option that is washable, at least by hand. That said, the result is totally worth the money.

I recently had septoplasty and no longer tolerated my F20 (over the nose) mask. I used a mask cover as the silicon causes moisture on my skin and then LEAKS and is uncomfortable, disrupting sleep!! I switched to the Amara View mask and loved it I used Aquafor on my skin as a buffer which only worked half the night and then moisture again. The cover for it doesn't work, it's too tight (even the L on the M cushion) and the whole thing leaks like crazy. Then I decided to try these. At first I cut the nasal opening (though it says not to) and that didn't work - too loose. Then I tried them as is, taking time to stretch the fabric a bit while in place on my face. WOW, that did it!! I have only used it for two nights but leaks are at a minimun (10L) compared to before, I don't wake up having to fix it and I can use one for a few nights. I plan to wash it (and dry it flat) as it is fabric (not paper as I thought when I bought it) so one package will last me a long time. I'm THRILLED.

I purchased these for the Resmed F40 face mask, my Sleep Dr recommended them for air leaks and comfort. I am using a highish pressure for my therapy which has me on a Bilevel machine and have to tighten down the straps on the mask to get a seal. I have found after using them for about 10 days is they do not stop air leaks BUT they do get rid of the noise that the silicone on the mask would cause from the leaks - both the leaking air and the "farting" sounds. I will also say that per the Aircurve 10 display the amount of air leaking seems to be more than without them but my therapy is still very effective and hasn't changed. As far as comfort - yes it keeps the area that used to be in contact a lot more comfortable so they work well in comfort. They stay on with the friction between the mask and your face. Personally I find them kind of expensive for a single use so I am using them 4 nights and then tossing them out, the cost over 4 months is better for me. They do stretch out over the extended usage but are still usable. Hygienically it not be the best but in the short time I haven't had a skin reaction. I would recommend trying them for the lack of air sound and the comfort they provide vs just the silcone of the mask on the skin. I gave it a rating of 4 because it doesn't stop the air leakage but my wife has not heard any air leakage since I have been using them.

It's flat, nearly impossible to shape to a 3D mask, no tape included. I gave up on trying to fit it to my mask. It is soft. Soft and worthless. Not recommended.

I am a fairly new BiPAP user as of 2/2019. The Amara View mask was ok, but made a lot of squeaking and squelching noises that was quite aggravating. My pressure settings at 18/13 are a bit on the high side, so it was expected. I decided to give these liners a try and they make a TON of difference! No more noises, and much more comfortable than just the mask silicone on your skin. I tend to move around a lot while sleeping which messes with the liner alignment, so I wake up a couple times to reposition it. When that happens, I have to take off the mask fully and carefully position the liner so it lines up correctly with my nostrils. These would be perfect if they came with a way to be secured in place. I do have slightly higher mask leakage with the liner on, but my AHI is actually lower, so I don't think it's a big deal. Besides, I like the minor leakage as the slight airflow leak through the material tends to help cool off where the cushion and my skin meet. Probably my only gripe is the price; rather expensive for what you get in my opinion. They are supposed to be single use, but I get 2-3 uses out of each one until they stretch out too much. Hand washing and then flattening them out to air dry helps to "reset" some stretching and edge curl, but 2-3 days of use is about the limit for me. People say these liners are similar to the look and feel of a T-shirt, and I agree. A t-shirt seems to use slightly thicker thread, looser weave, and a different weave pattern. I tried to take a close-up picture on my phone to show the differences between this liner and a typical t-shirt.

I’ve been using these liners for about a week now and will follow up at a later date as I get used to them. I say I need to get used to them for a few reasons. These are issues that may help if you’re considering investing in these. First, I use the ResMed Airsense 10 with the Dreamwear full face mask. I hated the silicone and suffered through it only because I didn’t want to pay for the unusually high priced liners (Dreamwear liners are few and far between). Well, I broke down and paid the $$$ for these when I just couldn’t make a successful one myself. The comfort is fine with the thin cotton. I find it a tad scratchy but it’s far better than the sticky silicone so okay. It goes on and stretches to fit easily. Most folks are saying it creates a good seal but I can’t say that’s true with my mask. It goes on well then my mask tends to slip around a bit when I move positions and air escapes. That wakes me up and I have to adjust. This happens all night long defeating my purpose of using a CPAP for a solid nights sleep. I also keep tabs on my sleep with the ResMed app that registers my activity and “grades” my sleep. I lose points every night for the mask seal/adjustments. I did try using a different size Dreamwear full face mask and changing the mask headgear fit but it still wouldn’t hold the seal. Another thing worth mentioning for anyone reading this that uses the Dreamwear ff mask, cut the center piece of cotton so that there is only one large hole. There is a center piece of fabric to cover the strip of silicone under the nose. When these liners slip, and they will, that small strip never failed to cover the nasal air passage. I struggled to exhale and the pressurized air diminishes. These are expensive but CPAP users can understand the need for them. I believe makers of all liners bank on our discomfort. What I did was take some heavy clear vinyl and trace the mask. Then cut the vinyl to make a template and Voila! I can now cut my own as needed with some old *lint free material. If you do this, note; Lint free material! Whatever you use, you get into your lungs directly! In the meantime, I wash and re-use these liners. Simply wash when you wash your mask, shape, lay flat on a towel. I have UV tank so I put everything in there before bedtime. EZ-PZ. Hope it helps you decide. I relied on other reviews before investing in these things. Just my 2 cents as well. Did it help? Let me know :-)

While not listed in the description, these will work for the ResMed F40 mask. I kept trying different covers for the F40, then someone recommended these liners. They work well. One might need to stretch the top hole out a bit to fit right for your nose. However, the fabric is lightweight, actually helped with my mask leaks, keeps my face from getting sweaty during the night, and helps so I don't get contact breakouts on my face. Yes, they can be a bit pricey, but every liner or cover will wear out, so whatever one uses, you'll need replacing. For me, the price is worth the good night's sleep I get.

I am a new F40 mask user and was struggling with the suction noise and getting a good seal. These liners have been great for getting rid of the noise completely. I’m still not getting a great seal most of the time but it’s good enough. I’ve only been using them for 10 days, I’m sure I’ll get the seal thing figured out. The down side is they are expensive and are one time use. Overall I’ve not found anything that works as well as these. I’ll buy again.

C’est vraiment parfait pour mon Airfit F40. Je peux dormir comme un bébé maintenant que mon masque est hyper confortable. Surtout n’hésitez pas, je les recommande à 100%. 😴

I was very disappointed that these liners were scented. I am sensitive to scents and it really ruined it for me.