MoJack EZ MAX 45001 Riding Lawn Mower Lift Jack, 450 lb, Zero Turn/Tractor | Fits 18.5-47.5in Wheel Span - Raises Deck 24in - Manual or Drill-Powered - Fold-Flat Storage - Blade & Belt Service

Got this for my JD 330X tractor with its twin blade mowing deck. For years, I’ve been using make-shift ramps, using 2X10s and foundation blocks to get enough access to the underside of my deck to allow swapping out the two blades. It was always a struggle to set this up and I’d had enough of it after my 4th year. The MoJack worked perfectly for my 330X which has a protective bumper on the front. No worries about clearance. The lift should allow for plenty of room for tractors that might have a big protruding nose profile, forward of the front wheels. My JD tractor weighs in at about ~500 pounds with deck attached. This lift was stable and strong and I had zero wobble, issues or concerns about safety or stability. Keep in mind when you are lifting only the front end of the tractor, you are NOT lifting the entire weight of it. Thus, I was under the ~450 weight limit of this lift and I purchased it knowing that. This lift stores well in a small profile and the two sections which separate allow it to be stored in a corner or hung on a wall. Each section is light enough to easily handle for one person. I’m delighted with this lift and like so many other reviewers, it makes changing blades on a mowing deck, a breeze compared to the dreaded “improvised ramp or hoist” method. 5 stars all around!

I have a John Deere E120 lawn tractor. I bought this item to elevate the mower to exchange the mower blades instead of taking the deck off each season, which was such a pain. This makes the maintenance task so much easier and safer. The setup of the lift takes some time but it is not difficult. Just read the instructions and take your time. There is also setup information shown on YouTube for MoJack lifts, which is helpful. This lift works amazingly well! Best decision to get the lift. The cost is a bit high, but it will last a number of years, and will save money in the long run instead of having the dealer do the exchange. Buy it, you won't be disappointed. Also, get wheel chocks which are essential. Take care...

I use this to lift my Ryobi RM480e mower and it works very well. Easy to lift, easy to lower, stores in very little space. I leave it fully assembled and park my mower right in front of it, so it takes up very little extra space and is always available for use. It uses a screw-type mechanism for raising and lowering, which feels very secure and requires no air pressure or hydraulics or fluids. Just a little light oil on the screw thread. It's got 3 built-in security stop points, at which the lifted weight is resting on the frame, rather than on the screw.. so you *could* leave it in a lifted position for long periods of time if it were necessary to do so, Assembly was very easy and took only a few minutes. The components are quite sturdy and seem to be well made. After assembly, the whole thing seems a little wobbly, but as soon as there's weight on it, it gets quite stable and sturdy. This model has a 450lb capacity, but since you're only lifting the front end of the mower, it would be able to lift quite a large mower. Lifting my little RM480e was child's play for it, It's possible to use a battery or wall-powered drill to turn the lifting.lowering screw, but the hand crank is ore convenient and quite easy to use, All in all, I'm quite satisfied with this product. Well worth the expense to be able to get my mower into the air for cleaning. Although the deck is removable, it's much more difficult than simply turning a crank,

I absolutely love the MoJack EZ Max! It has made maintaining my lawn mower a breeze. With its 450lb lifting capacity, this lift easily handles most residential and ZTR mowers. The space-saving folding design is perfect for my limited storage space. I can now perform maintenance and repairs with ease, thanks to this amazing tool. I highly recommend the MoJack EZ Max to anyone looking to simplify their lawn mower upkeep.

Easily put together, used, and stored. So glad we chose this one!

I always dreaded changing blades on my John Deere E140 lawn tractor. There is no safe easy way to jack it up and put it on jack stands. So I always went with what the owners manual says and removed the deck. What a pain that is. And just as bad putting it back on and trying to simultaneously line up 4 mounts perfectly front/back, side to side, and up/down. I knew there had to be a better way so I searched and found this. Wow. Came very well packaged, all the parts and hardware were there and in great shape. The instruction manual is very user-friendly and I had no problems assembling it, hooking up my tractor and raising it up. I used the option of raising and lowering it with a drill instead of the crank, and that saved time plus muscle endurance. I was able to go under the deck and efficiently swap out the blades using my blade removal tool/blade blocking tool (another aggravation-saver) and quickly lower it back down. Even including assembly time, the whole process took less time and stress than removing and reinstalling the deck. And I never questioned my safety while doing so, my blades need to be torqued to 65 ft. lbs. and nothing moved even a little bit during whole job. Just be sure to follow the instructions for securing everything before raising it up. This is hands-down one of my better purchases. Yes, it's not cheap, but in terms of effort, safety, time and cuss words, is well worth it. And if I had broken down and paid a mower shop to make a house call to replace the blades, that would have likely cost me in labor and service call what I paid for the Mojack. And he may well have used his Mojack anyway! And now I have it for next time, so it becomes more cost-effective over time. Let's face it, replacing mower blades is no one's favorite job. But this Mojack reduces it to tolerable. I won't say I'm looking forward to replacing the blades next time :) but I won't approach it with the sense of dread as before. If you have a riding mower/lawn tractor and change your own blades, you need this. I highly recommend it.

Made changing my blades on 42” Troybilt mower so easy. It pays for itself if you pay someone else to change your blades. Would definitely recommend even if you change blades yourself. Product is well made and breaks down for easy storage.

Great tool. Makes working on my lawn tractor 10 times easier. Highly recommended. I should have bought one years ago.

It works perfect for my zero turn lawn mower. It makes it easy to clean under it . I use my drill to left it up and down with little effort on my part

Actually it is the mower that it raises but my spirits have been raised as this is just great. I have a reputation of ordering things and returning them; an unfair slur as I only return things that are sub standard. This lift/hoist is anything but. Glad to say that I received a new lawnmower on the same day the jack arrived. Today I assembled the jack and raised the mower high enough to get under it to oil the deck before Winter. Couldn't resist trying the mower and then lifting it up again to clean the grass off. This fits the bill perfectly. Highly recommended and it will not be returned.

War auf er Suche nach einem Rasentraktorheber, dass eben so günstig wie möglich aber dennoch gut ist ^^ Es gibt einige Heber, die günstig sind aber sie heben den Rasentraktor von der Seite, was ich persönlich nicht wollte, weil es auf manchen Bildern/Videos so aussieht, dass das Gewicht teilweise auf eines der Vorderräder gelagert wird und weil man dadurch nur eine Seite gut reinigen kann. Mit dem MoJack EZ Max kann man den Rasentraktor auf eine angenehme Höhe heben und die gesamte Unterseite ist gut zugänglich. Der Aufbau war allgemein einfach und nach dem Aufbau habe ich den Rasentraktor gehoben und zum Test stehen lassen, während wir Harry Potter angeschaut haben :P Weiters finde ich es super, dass Gurte dabei sind, mit denen man den Rasentraktor zusätzlich befestigen und vor Abrutschen sichern kann. Vom Ersteindruck her definitiv sehr stabil, leicht zu bedienen und für diesen Preis nichts besseres zu finden und ja, ich habe lange gesucht und alles angeschaut, was ich finden konnte. Kann es persönlich definitiv weiterempfehlen.

Ideal pour l entretien

Der Zusammenbau war sehr einfach es liegt eine sehr gute Beschreibung für jede Schraube und jedes einzelne Teil anbei. Der Heber ist sehr stabil gebaut man kann sich ohne Angst darunter legen und seine Arbeiten verrichten.