Spray max USC 2k High Gloss Clearcoat Aerosol (6 PACK)

Great product

Great for painting automotive paint. My trucks doors clear coat was fading cause it was painted a few years ago and I used these 6 cans to reclear my two doors and fender and it came out amazing besides some dust particles in the clear which can be sanded out later

I've been using this clear since I started building guitars.It never failed delivering great results even on windy days! Before I use it I wrap the can in a heating blanket that I got here on AMZ. I used to just pour some hot water in a pot and let it heat up a little bit. This will increase the pressure of the can. Be carefully no overheat it though. This will allow even higer pressure saving the liquid inside the can with awesome results.I started using it as a grain filler since it doesn't shrink as much as other products.I spray light coat, then wait 10-15 minutes depending on temperature, then spray heavy coats, letting it flash for 10-15 minutes. For best results aftet last coat I don't go lower tan 1500 grit before buffing.I sprayed this outside in the winter, the outside temperature was around 30 degrees, let it cure inside for a day or so. And ALWAYS WEAR SAFETY EQUIPMENT! Good respirator and safety glasses are a must! I've been using a full face mask/respirator.

I had painted an old Honda ATC fuel tank with Rustolem paint. It looked perfect and i let it cure for over a month. As soon as it got fuel on it, it bubbled and peeled. I was so angry. I thought to try this. Solved. As you can imagine, no matter how careful one is when filling fuel tank- there will be some on tank. This paint is incredible. Glossy and holds up to all the spills i have thrown at it. Well-worth the price for this reason alone.

I liked the results I got from these, end product wet sanded and buffed out nicely. I would give it five stars except I had a couple cans fail when I went to activate the hardener, upon pushing in the bottom button the product released out past the side of it, to the outside of the can and not inside like it is supposed to do. Also be aware it runs out before the can feels like its empty, I assume that is because of the inside bladder required to house the hardener, making the can feel heavier.

excellent finish. showroom gloss. hard as a rock

Buy this now wow - faded 2015 Tahoe hood was able to bring it back to life - used lightly 800 grit and then 1000 grit sand paper and shot it with 3 cans

This is great stuff if you are doing a body panel or two. The nozzle has a nice spray pattern. Dries fast. Depending on how good you are at painting you can get it to lay pretty flat. It does sand and polish nicely though after about 48 hrs.