Respawn 110 Pro Ergonomic Gaming Chair with Footrest and Recline

I was looking for replacement office chairs, preferably high back. Prices were all over the map, and so were the reviews. I spotted these--not office chairs, but definitely usable--on sale, so I jumped and got two. As it turns out, the wife doesn't like her new chair and opted to keep using her squeaky old one. Amazon said it was going to be 4-5 days and the chairs would arrive separately. A couple updates later and the chairs were arriving early. And, they did, one shipment at my gate 2 days early so the shipping thing was grand. After lugging the cartons onto my porch and contemplating lint for a few minutes, I decided it was time, so I opened the first carton (which was damaged) and went for it. Took my time, didn't get carried away organizing stuff, and half an hour later the first chair was built with the second one unboxed. Assembling the second chair went like clockwork. About 45 minutes from starting I had both chairs ready to game. The cartons, though damaged, had protected the contents just fine. There were no visible defects in any of the parts. All the screws in the hardware packs had thread locking compound on them, the parts were organized along with two hex wrenches, and one set of spare hardware (one of each type) was included. The pedestals assembled quickly and solidly: attach spokes to hubs, insert casters, drop lifts into hubs, drop covers over lifts. Next seat brackets were bolted to seats, seat backs were lowered into place & bolted, arm rests were bolted on, pillow secures with elastic, and done. I left hardware a little loose until I was sure the parts were aligned, then I tightened the screws fully. Do this to all the screws including the armrests. The assemblies will be 'tight' at first but they will break in! Better a little stiff when new than screws falling out a couple months later! I am about 5'10" and 170 lbs and so far the chairs are just peachy. The backrest is slightly taller than me when I'm seated; lumbar support is in roughly the right spot. I don't use the auxiliary pillow unless fully reclined. The reclining mechanism on one chair slips a tiny bit but then locks solidly. The pedestals have a little flex in them but not enough for concern. The armrests feel reasonably solid but I don't put my full weight on them. Same goes for the footrest, which feels a little springy, and reaches to my ankles when fully extended. The padding is adequate for me on all parts and I have slept in the chair. My only critique so far is the armrest pads should be a couple inches longer at the backrest end, and the seat should be at least one inch longer. Overall, it's a nice chair for the price, fingers crossed that it will be reasonably durable. Side note: apparently my legs shrank while writing this. The footrest reaches to about 76 mm or 3" above my ankles, oops.

Have had my eye on this computer / gaming chair for a while now. I absolutely love the black and purple design and it looks just as good in person. This came well packaged in a 40 lb box. Instructions were very big with pictures and clear directions with parts labeled. Put it together easily by myself in about 15 to 20 mins. Didn’t run into any issues with the assembly which was nice. This is an initial impression review but so far I love how comfortable the chair is (first day using it today). I will be completely honest and say that I would not buy this chair at full price that it is normally listed for, but I caught it for Amazon prime day significantly reduced and for the price I snagged it at I am 100% satisfied with this chair and for this same sale price would buy it again.

Good Chair for now I've had it for 2 months I think durability is unknown will be tested. The lumbar support is made for shorter people if your taller like me do not buy. I was able to fix it with the cushions of my old chair that are very comfortable. The cushions of the chair is ok not the best for comfort but as listed not a problem for me. The pillow is nice having it not attached and the arm rests are very soft. The foot rest doesn't go out very far and not very sturdy but I just put the feet of my old chair to fix that issue. The foot rest is good for sitting just not for laying back and putting your feet all the way out just good for a spot to sit them. The adjustable back is very nice I like it.

Wow, I am very impressed with the quality of this chair, and I'm very picky so that says a lot. The leather material is very soft and actually FEELS like real leather. I've owned more expensive chairs that felt fake. It even has a fresh almost new car smell which I appreciate. The head and lumbar pillows serve their purpose well. The foot rest is very supportive for your legs and the rubbery wheels roll smoothly on my carpet without the need of a car mat. My only complaint so far is it does feel rather hot while sitting in it for awhile, however this isn't anything wrong with the chair; it's just not perforated leather so fair warning it's going to be hot. Also, if I am to nitpick for a second, I can't rock in it. The lean is either locked in place or free movement and it's very free movement so when I lean back the recoil isn't very conducive to rocking. It's definitely a set where you like it and lock it kind of situation, but I can live with that. The chair is very comfortable and I'm glad I went with Respawn. It shipped in two days prime, I actually got it a day earlier than expected, and assembly was very straightforward. I literally just built it and have been sitting in it for awhile so these are just my first impressions. 3 months update: The chair is still holding up. I use the leg rest a lot more than I initially thought I would and it's still working well. The foam on the end of the arm rests have been permanently sunk in, all the way down to the plastic and I can feel the sharp point of the screw if I put too much weight on my elbows. That's a bit disappointing but not enough to take away any stars. I still really enjoy this chair. I bought a seat cushion because I felt it wasn't cushy enough but mostly because I didn't want what happened to the arm rest to happen to the seat.

Comfy yet also uncomfortable. Pros: -Easy assemble -Parts seem to be of decent quality -The leg rest function is simple yet great -The lean back position is comfortable Cons: -The seat cushion is mediocre, I can feel the hard material below the cushion. (I weigh 235lbs) -Even when locked, if you use the arm rest to get up from a lean back position, it will force the arm to move which may cause damage -Seems a bit overpriced for what you get Recommendations: -if you can get this chair for below $200, in the $125-150 range, I say it may be worth it. Definitely not worth what I paid for it.

Update 5/31/20, 3 days in. I bought this chair 3 days ago, and set it up in about 30 minutes by myself. It normally costs around 170 but it dropped to 148 so I bought it. I'm 5'7, and the neck rest is a tiny bit short for me but I can rest my head on it. The foot rest isn't really useful and it's a little flimsy. The chair feels mediocre quality and shouldn't break if you use it correctly. The chair height adjustment is fine and the lumbar support is great. The armrests are a little wobbly, as stated in the other reviews. The leaning mechanism is a little unstable but It leans really far back. The box came in a little beat up but nothing inside is fine. You can't use this chair for long without a shirt because it can get a little moist on the lumbar. It's not really as comfortable as I expected but that's the same with all gaming chairs. They're mainly for show. If you want something comfortable, use an ergonomic office chair. One last thing about this chair is that the right arm rest is about an inch lower than the left. This is a tiny detail but it really bugs me. Also, if you learn back with the lean mechanism locked, the chair still leans back a little and creaks. I'll post an update in a few months.

The chair assembly was easy until I got to the part when I bolt the steel support at the base of the back of the chair into the steel support of the seat. There are three holes drilled into the steel support for three 8x20mm bolts that are included which require an included Allen wrench to tighten. The included bolts fit into the holes fine from the back portion of the chair to the steel support on the seat of the chair but there was nothing they screwed into such as a nut so they just immediately fall out and the chair falls apart and could not be assembled as received. I checked the instructions and it literally has an illustration of these bolts just going into these holes with nothing to screw them into to tighten the back support to the seat frame. They just sit there. The accessories are nicely packaged and clearly labeled so I knew I wasn’t missing any pieces, plus again the instructions clearly state I was doing it right which is insane to me, how can anyone put this chair together? I had to purchase three 5/16th (didn’t have 8x20mm/metric size at Home Depot so couldn’t use factory bolts) bolts/nuts and a matching ratcheting combination wrench to use with a torque wrench to install them at extra cost. This is why I’m giving just two stars. I had to settle for silver bolts because I couldn’t find black ones to match the color of the steel frame. After assembling the chair itself looks pretty nice. It’s a pleather material, feels fairly mid to high quality. Chair neck support fits me perfect at 5’11”. It just about fully reclines and feels comfortable and doesn’t look too cheap. I’m happy with it the look and feel. I’d give it 4 stars but I just can’t believe I had to purchase nuts and bolts to install it. It appears based on the instructions and illustrations that all of the chairs are like this, maybe I bought a manufacturer defect? I took a photo of what I’m talking about. The nuts/bolts in the photo are the ones I had to purchase and were not included, hence silver color. Again, I meticulously checked the instructions and box for extra parts and it was obvious there were none! Considering the extra 20$ I spent I may have been able to find a slightly better chair but probably not so it may not be a total deterrent if you don’t mind the extra work. Chair is sturdy, comfy, doesn’t look too cheap.

I found the reviews on this chair to be nothing more than soap boxes with unlawful information. So let me get right to the point. Construction is great. The "leather" feels soft and similar to premium car leather. The plastics are thick and solid. The metal is thick steel and painted with durable black paint. It's a solid product. The base is very heavy duty. The wheels we're the only thing I question a bit. Felt a bit like cheap plastic wheels. They do work well and I don't have any real complaints on them, but they were the only thing that did not feel quite as solid. Putting it together was easy. The instructions are basic but a little common sense does the trick. If your stuck, they have a great website with videos, automated help, and easy to use contact solution to let them know if you need help. The foot rest is cool. With a slight or more recline it feels good to have something to put your feet up on. It can feel a little wobbly but it's sturdy and isn't going to break. The wobble is really the entire chair moving, as all office chairs do. The arms do have some give in them. I think the reason is because when you recline, the arms fold back with you so that you have arm rests while reclined. It's cool actually. But because the arms need to move, there is some give in them if you really put a lot of weight on them. However, don't confuse that with it not being sturdy. Even with the give, your not going to break them unless you put 300 pounds all on one arm rest. They are stable. The head rest pillow is a bit overkill but some might like it. The limbar pillow is definitely appreciated. My lumbar pillow came with a broken clip. Their support has been easy so far and I assume I will get a replacement. If not, it's prime and Amazon always takes care of the customer. I'm not worried about it. There is a smell to the leather. It's normal with new leather and pleather products. Couches have it right from the manufacturer and new cars have to as well. It goes away over a week or so. It's like that new car smell. The support seems to be great! Intuitive website allows you to ask for help and they get back to you quickly. Also, if you get it on Amazon with prime, they also take care of you if the seller will not. But so far, I haven't even had to talk to Amazon for my small clip issue. Don't listen to the people on here with their negative reviews. I could talk about fat trolls in moms basements, but I will instead say that gamers are an interesting breed. Many of us are typically overly opinionated know it all's who feel the need to complain about every little thing. So far I like this chair. Ill update this review if anything changes.

Not original Respawn 110 chair but It's Good chair so far.

Loved the chair, great back support and material is also very nice. Took 15 minutes to assemble. Seller is also very responsive and helpful for any support. Delivery came before the stipulated date. Packaging is also very good.

مريح

Muy buen producto, es mucho mas grande de lo que esperaba y además muy cómodo no me tomó mas de 1 hora armarla, la calidad del material se ve buena y resistente. Como ya lo dice en el manual, cuando inclines la silla completamente no hagas mucho peso hacia atras ni te dejes caer con fuerza por que es muy probable que te caigas. Recomendado Uso después de 4 meses: tiene un detalle de que los tornillos que fijan los reposabrazos se aflojan y tienes que volver a apretarlos cada cierto tiempo. Hasta el momento no tuve ningún otro problema

easy to assemble but i recieved the wrong color ordered it in grey and came in black