Epoxy Resin Clear Kit 64 OZ for Art, Jewelry Making, Crafts, Keychain - Including 32 OZ Resin and 32 OZ Hardener, Fast Curing 2 Part AB Epoxy Casting Resin by Puduo

Nice kit! Pump lid makes the bottles easier to use than usual, which I love. The resin cures as expected, no yellowing so far and curing time is as usual. There's average amounts of bubbles, but I use an electric mini mixer and a pressure chamber, so it doesn't bother me. I appreciate the accessories included with this set, which makes it a nice bonus that bumps up my likelihood of reordering this exact product in the future.

I love this resin! It's perfect for small projects. I got it to create a pressed flower phone case, and have also bought other molds on amazon for making key chains and coasters. I included pictures of my projects thus far. It's my first time working with epoxy resin and this kit is GREAT for beginners! It includes popsicle sticks, plastic measuring/mixing cups, and the resin. My ratio was definitely a little off for my first project of the phone case/key chains, but it seems to be quite forgiving because it still cured perfectly. I was worried it would remain sticky and not cure because I was off, but it still worked like a dream. Follow the instructions-- they are so helpful! I liked their tip of placing the cup in hot water before pouring, as the heat will get rid of any bubbles that remain and will make the texture much more liquidy and easier to pour. It's a very thick/viscous texture otherwise. As other reviewers mentioned, the resin will remain quite flexible even after curing about 6-8 hours. This is nice if you want to adjust or bend, but personally, I recommend you don't take your projects out of the molds for at least the full 24-48 hours if you don't want them to bend. After the full 24-48 hours it becomes rock hard and looks great! Cures quickly and looks super clear. Also works well with mica powder, which I experimented with in my coaster. Beautiful! My old complaint is that if you want to pour from the cups onto small projects (like a phone case), it's much easier to work with a measuring cup that has a point or lip, or isn't just completely cylindrical? It makes a mess. Remember, make sure you wear gloves, wear a mask, and work in a well-ventilated space (with a fan if possible too!)

This is my favorite brand of 2 part epoxy resin. It mixes easily and cures beautifully. Long working time, low odor and clear pours stay clear for at least a year and a half (my oldest project). Not always the best price, but usually very reasonable. It's my go-to choice.

The Puduo Epoxy Resin Kit delivers a really clear, glossy finish that’s perfect for jewelry, crafts, and coating projects. The newly formulated resin mixes smoothly and has a decent working time, giving you plenty of time to spread and remove bubbles. It cures nicely without yellowing, which is a big plus for long-lasting pieces. If you’re looking for a reliable resin kit for clear, professional-looking results, this one’s worth checking out.

For a first timer using a resin product I was very nervous. Hubby and I received a beautiful hand painted decoupaged serving tray as a gift. However, we were never able to use it being afraid we would ruin it. I did a lil research and thought this product and its reviews would work fine for my project and to make it so that we could finally use this beautiful tray to serve drinks, etc on. The painted tray however was very bowed. It took three orders (3 bottles) to achieve my desired look. So I actually had a little left over so I experimented with a few other dressing table trays that were looking a lil scratched and worn. They all now look like brand new😳. This product was so easy to use. I do recommend wearing the gloves. Maybe not the ones in the kit.. I used some medical ones that I already had. I did mix the first bath exactly as instructed. No issues. The second and third batch I did do a light sand with 220 sand paper wiped it down with pure acetone. (Per the instructions. And since I used the whole bottle the second and third time I used a red solo cup to mix them together because the cups that come with were too small. I would advise using a smooth cup, and possible a disposable spatula.. to get all the product out of the cup. I felt some product was wasted due to the non smooth cup. I did use a larger (wider) wooden stick to level it. I then used a blow dryer on a low heat setting to remove the few bubbles I had and then to also assist with the leveling process. I will definitely be doing more projects with this, and purchasing it in larger quantities!

This was my first ever resin so I have no basis for comparison. Here's how it went.... I found the gloves and sticks in this kit a pointless waste of money (if they even factored in to the the price). The gloves were too big and I got three sticks which wasn't even enough for my first pour. So I wouldn't buy this because it includes gloves/sticks, go get your own. The little cups were nice, but little. They hold enough for some jewelry maybe. If you're doing coasters or an art pour piece they didn't hold enough and I had to buy bigger ones. I'm also older and I found the markings on the cups hard to read. I wish they had been in black or such. The markings are in ml's. The resin itself was fine. Directions are easy, ratio is even so that was nice, stirring for a full three minutes. I've just finished this set so it's too early to tell if it will yellow or not. There was no bad odor, very little odor at all actually, but I did turn on the purifier and sat in front of an open window anyway. It has a 40 minute window to play around with it. I LOVED that. As this was my first experiment with resin, I went slowly at every stage, didn't have things handy I should of, etc. etc. I poured in the morning and left it and next morning all was dry. As I'm new to this, I took the back of a coaster mold and used the various small sections to experiment with colors and techniques, keeping notes on each experiment. So other than the gloves which didn't fit and too few sticks, I'd recommend this for beginners.

I am a new user to the hobby of making jewelry and other objects by using Epoxy Resins. I used this 2 part epoxy right away when it was delivered. I mixed up a batch of 100 ml, which is large enough to make a small pyramid, several geometric shapes and small molds of jewelry of various shapes. The mixture itself took about 4 minutes to stir and I could see that all the air bubbles were out and the mixture looked very clear in the silicone cup that I was using. I then split the mixture into 4 smaller cups so that I could add either a power color or a liquid ink color. After a little stirring I proceeded to fill the molds. This was all an experiment for me. I am learning about how to fill the molds and try colors out. I mixed some of the colors in some of the larger molds to see how they would blend or look next to each other. The epoxy mixture poured great. It flowed evenly to fill each mold. I had to learn to slow down as some of the smaller molds overflowed a it. When the pouring was done I had to let them solidify overnight. I looked at the molds the next day. Everything solidified within 12 hours, probably cause the molds were so small. Every item turned out great. The epoxy was great and easy to use. Clean up of the expos was easy because I used all silicon cups and a lot of disposable stir sticks and I was careful not to be messy. Using this epoxy Mx was great and I recommend it to all users, new and more experienced users.

I was initially hesitant about the pump system, but it actually worked very well. As long as the pumps were capped after use, they did not clog or slow down, and they made measuring the resin much easier and more consistent. My main issue with this epoxy is the amount of bubbles. I experienced a large number of small bubbles during mixing and pouring, as well as an unexpected number of larger bubbles. Some bubbles were still visible even after curing. While it wasn’t catastrophic, it was noticeably more than I’m used to and required extra effort to manage. Curing time also took significantly longer compared to my previous resin brand, which slowed down my workflow. Because of the bubble issue and longer cure time, I’ll likely be trying other epoxy resin brands for now rather than sticking with this one. I do suspect the pumps may be contributing to the bubbles, so I plan to test the resin again without them before fully ruling it out. Overall, the pumps are a strong feature, but the bubble formation and cure time make this resin less ideal for my current needs.

This is by far the best resin I have used. I have tried several different brands and with all of them I have really struggled with hundreds of tiny bubbles which have ruined my projects. I make resin jewellery items, ie pendants, earrings, bangles etc, and small dioramas of the ocean using plastic toy sea creatures and tinted resin. This resin is smooth to mix, easy to pour and has no bubbles in it at all. It's fantastic quality. I have made several pairs of earrings this week since ordering this and they have all come out super clear and completely bubble-free. I can't praise this enough. I will be sticking to this brand from now on and definitely buying more. When I have used other brands of resin, even if I mixed it really carefully, heated it up and poured gently, I still had tons of bubbles in my projects - but this brand is clearly much better quality because the bubbles are virtually non existent. Love it!!

Just love this resin to bits bubbles self raise and burst,clear,easy mix , just amazing for smaller projects 😊

Crystal clear resin. Beginner to epoxy resin & love this product. Easy to use. 1:1. The best. Fast delivery ✅

كان نفسي استخدمه زجاجة جت نصها ناقصة والتانية مليانة 🥹🥹🥹

amazing but the amount is enough for one project hope it comes with a bigger size