KINGGERI Roof Rack Cross Bars for Ford Bronco Sport (Off-Road)

Perfect fit and looks great on my 2026 Bronco Sport Badlands. Easy installation.

The product fit my vehicle exactly as advertised. The only difficulty I had during the installation is that it required a rubber mallet to seat the rubber isolators properly against the vehicle rails. I struggled to install the bolt (it seemed too short) that attaches the rack to rails until I tapped them with the mallet. Don't do this with a hammer or your will take all the finish off the parts. The system is high quality and seems very strong. The crossbars look great and I intend to keep them installed full time.

Almost like the OEM except you have to put it together. Ford cross bars come assembled and are "non-adjustable, meaning you don't tighten the bolts underneath the bars. Not a big deal as these are easy to assemble and install. Just use a blanket or towel on the roof in-case something comes apart. Bought this for Bronco Sport Badlands. Reason I sent back is because they came scratched during its journey to my address. Real pathetic pack___. Other reviews mentioned the same issue. You would think they would make an effort to correct that and the thin box it comes in. This is not due to rough handling just trying saving $$$ on materials.

I first bought Fords version of this from their Bronco Sport accessories website. From their description it would fit all sport models with no mention that it wouldn’t fit the Badlands. After two frustrating hours of trying to install it I returned it. I bought this model, which is basically the same design but less than half the price. It took me about half an hour from unboxing to complete and successful installation. I am very happy with the product. It works perfectly with my Yakima bike racks! I highly recommend these crossbars for your Bronco.

I had read several reviews where people stated that the bolts that clamp the crossbars to the rails are not long enough. It's true that you can't just loosen them like an open jaw and slip it around the rails. BUT if you loosen them all the way, You can fit the bottom bracket up into the rail slot and then re-thread the bolt that comes with it. There's plenty of thread to secure the crossbars to the rail if you do it this way. Yes, it's a bit tricky to re-thread them, because the bolts have plenty of wiggle room, but by inserting them as straight as possible while holding the bottom of the clamp in place, it works. One really nice surprise is that the clamps are solid metal. In the photos, it looks like the clamps (the "riser" part) are plastic. Nope, they're metal. Once in place, they seem very sturdy. I was originally not liking how much higher than the rails they stick up, but once on there, they look pretty good. Anyway, I hope this help you get them mounted.

1 year old and it's all corroded. Not sure how to contact the seller.

These are just as good as the OEM but for much less money. The install was easy and I haul all sorts of things on them. Makes the car even more versatile.

The final result is good. However, extensive modification was needed to fit them to my 2024 Bronco Sport Badlands. The description specifically says they are for the Badlands model, but they did not fit. The tabs securing them to the roof rails had to be bent a great deal to fit.

Le quedaron perfecto a mi BS badlands 2023.. ya la probé con un maletero y viaje con el y todo perfecto.. recomendable

I installed these of a 2025 Ford Bronco Sport Badlands. The item arrived on time and I installed them in about 25 minutes from start to finish. The material is very solid and sturdy. All of the bolts are long enough so I am not sure why others have found them too short as the ones supplied with this product were fine for my Bronco Sport. A instructions and tips to help: 1) Install the left side screws and tighten them on the bracket as per the instructions. Do this for both left side brackets. 2) Install the right side screws/washers and keep these loose on the brackets as per the instructions. 3) Place towels between your roof rails and the cross bars to make sure you don't scratch anything during installation 4) Find the notches underneath your roof rails as this is where each cross bar rails will install. 5) Loosely place the cross bar rails so they are sitting on top of the roof rails. 6) Loosen the screw at the top of the bracket such that you remove it completely. 7) Place one hand under the bracket to push it up in the notch and then hand tighten the screw at the top of the bracket with your other hand. Do this on both sides (with both brackets). 8) Once you have the top screws hand tightened on both sides, go back to the right side screws underneath the brackets that you kept loose in step #2 and tighten these. 9) Then tighten the screws on the top of the brackets. 10) Do the same for the other cross bar rail. DIY tip: Use a T40 Torx socket as this fits perfectly on the supplied screws and that way, you won't have to futz with the supplied tool. The T40 socket with a ratchet works much better.

Okay so I just installed these and they seem rock solid. The install was pretty easy but I did have one hiccup. One of the screw mold for the mount was not wide enough to allow one washer to sit flush. I had to use a belt sander to take about 1mm off around the edge to make it work. Other then that no problem and they awesome on the vehicle

Excellent quality and easy to install. Fits my 2023 Ford Bronco Sport badlands edition perfectly! Highly recommend

Perfect fit, easy to install but you should get a helper. Looks like it came from the lot like that.